S200 Auxiliary Light Purelux Instructions
- July 25, 2024
- PURELUX
Table of Contents
S200 Auxiliary Light Purelux
INSTALLATION INSTRUCTIONS
Varoitus! Read all the instructions provided before installation
- Disconnect the ground connection from the battery to avoid accidental short circuits before connecting electrical wires. If mounting requires drilling holes, make sure to avoid damaging any vital components of the vehicle.
- Only operate under the specified voltages (DC 9-32V).
- Do not touch the lamp or the casing for at least 30 minutes after turning the light off to avoid heat injury. Keep the heat sink clean and exposed to maintain airflow.
- Do not stare directly into the light to avoid eye injury.
- Use only soap and water for cleaning. Do not use a pressure washer for cleaning.
- Dispose of the unit through your local recycling authorities.
- Additional technical information for each model is available through www.valostore.com.
OFF-ROAD MODE IS PROHIBITED FOR USE IN NORMAL ROAD TRAFFIC! REFER TO THE WIRING SECTION FOR MORE INFORMATION.
ASSEMBLY DIAGRAM
Wiring, mounting and aligning
- Ensure that the working voltage is correct and choose the corresponding relays (DC12V/ 24V).
- Connect the unit using a Purelux-wiring harness (sold separately).
- Change the light power modes by pressing the button on the side of the lamp. Make sure to select the corresponding light mode for off-road or road traffic use. Off-road mode is significantly brighter.
- Remove any protective films from the lamp before operating.
- Turn on the light to test the connection. If the light is not working as expected, please refer the instructions.
Install the necessary brackets to the light (side or bottom mount) and install the light to the vehicle. Secure the fastening!
Wire description
- DT/ DTP: Driving light connection / S300, S540 & S800
- Red: Power (+) / S1050
- Black: Grounding (-) / S1050
- White: Position light (White)
- Yellow: Position light (Amber)
Importer: Handshake Finland Oy
Purelux Panther Series is proudly a design from Finland and manufactured with
top-of-the-line quality in China.
Importer: Handshake Finland Oy / Alasintie 9 / 90400 Oulu /
+358 75 328 5820
www.handshake.fi
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>