Baseus H1 HomeStation Outdoor Camera Owner’s Manual
- September 28, 2024
- Baseus
Table of Contents
Baseus H1 HomeStation Outdoor Camera
Product Information
Specificati ons
- Model: H1 HomeStation, N1 Outdoor Camera
- Connectivity: WiFi
- Compatibility: iOS and Android devices
- Power Source: Electric
Product Usage Instructions
Adding the H1 HomeStation
- Enter the homepage and click on the [Add Devices] button or the + icon on the top right corner.
- Choose the HomeStation category and select the model number.
- Bind the HomeStation to My home and click [Next].
- Follow the on-page guide to power up and connect the HomeStation to your router.
- Connect your phone to the same WiFi network as the HomeStation.
- Wait for the HomeStation’s LED to turn blue.
- Long press the SYNC/ALARM OFF button for about 5 seconds until LED starts flashing blue.
- Select the corresponding SN code of the connected HomeStation.
- Wait for the App to bind to the HomeStation.
- Edit the device name and proceed to the next page upon successful binding.
- Once added successfully, follow the operation guide and finish the setup.
- Return to the homepage to check the bound HomeStation status.
Adding the N1 Outdoor Camera
- Go to Add Device page and select Camera category.
- Choose the desired camera model.
- Power up the camera and long press SYNC button for 5 seconds until you hear a beep.Select the HomeStation to bind the camera (ensure HomeStation is powered on and nearby). Wait for successful binding of the camera to HomeStation.
- Edit or choose a name for the camera on the Camera Name page.
- Proceed to the operation guide after successful binding.
- Follow the operation guide, finish setup, and return to homepage for camera monitoring.
Frequently Asked Questions (FAQ)
Q: How do I troubleshoot if my device fails to bind?
A: Ensure both devices are powered on, try restarting both devices, and make
sure they are on the same network. If issues persist, contact customer support
for assistance.
How to add the H1 HomeStation ?
-
Enter the homepage, and click the [Add Devices] button in the middle or the “+” icon button on the top right cornor to enter into the device adding list.
-
Click the “HomeStation” category.
-
Choose the corresponding model number of the HomeStation.
-
Bind the desired HoneStation to “My home”, and click the [Next] button.
-
According to the on-page guide, power up the HomeStation and connect it to your router. And click the [Next] button.
-
Connect your phone to the same WiFi the HomeStation is connected to. Then, click the [Next] button.
-
Wait until the HomeStation’s LED turns to blue, and click the [Next] button.
-
Long press the SYNC/ALARM OFF button for about 5 seconds, wait until HomeStation’s LED starts to flash blue, and then click the [Next] button.
-
Select the corresponding SN code of the HomeStation connected with your phone.
-
Wait until the App binds to the HomeStation.
-
After binding the HomeStation, you can edit to name the device, and click the [Next] button to enter another page.
-
When you see “Added successfully”, click the [Next] button to enter into the operation guide
-
Click the [Finish] button and return to the homepage, then, you can check the bound HomeStation status.
How to add the N1 Outdoor Camera ?
- Choose the “Camera” category on the “Add Device” page.
- Choose the desired model of the camera selected.
- Power up the selected camera, long press the SYNC button for 5 seconds until you hear a beep, then click the [Next] button.(this requires the logged account to be bound to a HomeStation)
- Choose the HomeStation to bind the selected camera. (ensure the HomeStation is powered on and near the camera)
- Wait until the camera is bound to the HomeStation.
- After successful binding, enter the Camera Name page to choose or edit the name, then click the [Next] button.
- Click the [Next] button and turn to the operation guide.
- Check and follow the operation guide, click the [Finish] button, and return to the homepage. Then, you can start camera monitoring.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>