LUMI Recovery Pod PRO Ice Barrel Mini Chiller User Manual

September 28, 2024
Lumi

LUMI Recovery Pod PRO Ice Barrel Mini Chiller

Product Specifications

  • Product Name : LUMI Recovery PROTM Insulated Hard-Wall Ice Bath
  • Included Items:
    • 1 x Protective Thermo Top Lid
    • 1 x Carry Bag
    • 1 x Pump
  • Maximum Pressure: 8 PSI (0.55 Bar)

Product Usage Instructions

Unpacking and Setup:

  1. Read the user manual thoroughly.
  2. Register and activate your warranty on the manufacturer’s website.
  3. Follow the steps in the Quick Start Guide.

Safety Precautions:

  1. Ensure the unit remains upright on a stable surface during transportation.
  2. Allow the unit to settle for 24 hours after transportation before use.
  3. Check for water leaks before connecting the chiller unit.
  4. Use a suitable AC socket or extension cable with surge protection for the chiller unit.
  5. Avoid water contact with the unit and unplug immediately if it gets wet.
  6. Always switch off the chiller unit during cold water therapy sessions.
  7. If the unit malfunctions, unplug it immediately and refrain from using it.

Quick Start Guide:

  1. Place the ice bath on a stable surface and inflate using the pump.
  2. Ensure proper inflation pressure (recommended max 8 PSI).
  3. Seal the valves securely after inflation.
  4. If using an external chiller unit, keep it at least 1 meter away from the ice bath.
  5. Connect the Inlet and Outlet pipes securely.
  6. Fill the ice bath with cold water until the desired level is reached.

Draining the Ice Bath:

  1. Switch off and unplug the chiller unit before draining the water.
  2. Remove the ‘Water Out’ drain plug to empty the water.

FAQ

  • What should I do if the chiller unit stops working during a session?
    Immediately unplug the unit and refrain from using it. Contact customer support for assistance.

  • Can I leave the chiller unit connected to the ice bath when not in use?
    It is recommended to disconnect the chiller unit when not in use to prevent any potential issues.

TRUST THE PROCESS

  • We always end up right where we are supposed to be, right when we are meant to be there.
  • Sometimes we just need a little time to recover.

TAKE A MOMENT TO FIND OUT WHAT’S INCLUDED

  • 1 x LUMI Recovery PRO™ Insulated Hard-Wall Ice Bath
  • 1 x Protective Thermo Top Lid
  • 1 x Carry Bag
  • 1 x Pump

UNPACKING YOUR LUMI RECOVERY POD-PRO

  1. Read carefully through this user manual before using the LUMI Recovery PRO™ Ice Bath.
  2. Go to our website to register and activate your LUMI warranty.
  3. Complete the steps in the QUICK START GUIDE.

CUSTOMER SUPPORT

If you have any questions about setting up or using your LUMI product, please visit our website for further information, faqs, troubleshooting and customer support.

SAFETY PRECAUTION

WARNING
ELECTRICITY IS VERY DANGEROUS, IN ORDER TO PREVENT ACCIDENTS OR DEATH PLEASE PAY ATTENTION TO SAFETY AND ENSURE YOU FULLY READ THIS INSTRUCTION MANUAL BEFORE USE.

  1. During and after transportation, the LUMI chiller unit must stay upright on a stable surface at all times.
  2. After transportation, and before use, the LUMI chiller must be left for 24hrs for the refrigeration gas to settle.
  3. Make sure there are no water leaks from the LUMI chiller unit, or inlet and outlet pipes when connected to the Recovery Pod PRO.
  4. Make sure the LUMI chiller unit is plugged into an AC socket or extension cable that is suitable for use, properly grounded, has a built in surge protector and preferably is IP65 rated.
  5. Ensure the LUMI chiller unit is kept dry at all times, do not immerse, splash or spray the unit with water. If the unit does get wet, unplug it immediately and do not use.
  6. Never leave the LUMI chiller unit switched on when using the Recovery Pro PRO, always ensure the unit is switched off during your cold water therapy session.
  7. If the LUMI chiller unit stops working or doesn’t work when switched on, unplug it immediately and do not use.
  8. We accept no responsibility for misuse or failure to use this equipment safely as instructed.
    Disclaimer: It is not possible for LUMI Therapy to warn the user about every possible danger related to use of an ice bath or chiller unit for cold water therapy. The user must always use their own common sense and good judgement when using an ice bath.

QUICK START GUIDE

ASSEMBLE YOUR LUMI ICE BATH

  1. Unpack and place your LUMI ice bath on a stable surface.
  2. Inflate both the ice bath body and top lid using the supplied pump.
  3. Ensure the pump is fully inserted into the valve, and pump until fully inflated -recommended maximum pressure 8 PSI (0.55 Bar).
  4. Once inflated, seal the valves using the safety caps.
  5. If you are using the LUMI ice bath with an external LUMI chiller unit, place the chiller unit on a stable surface at least 1 meter away from the ice bath.
  6. Connect both the Inlet and Outlet pipes and ensure all valves are ‘hand tight’.
  7. Fill your LUMI ice bath with ‘cold water’ using a hose until the water is roughly 15 cm (6 inches) below the top (or approx. ⅔ full to account for water displacement).

HOW TO EMPTY YOUR LUMI ICE BATH

  1. If you are using the Recovery Pod PRO with the LUMI Chiller Unit, please ensure the LUMI Chiller Unit is switched off and unplugged before draining the water.
  2. Unscrew the ‘Water Out’ drain plug to let the water drain out.

PRODUCT OVERVIEW

HOW LONG SHOULD YOU STAY IN COLD WATER?

Cold water therapy works best with the right combination of time and temperature. For example, if you are in water with a temperature of 10°C, we would recommend you stay for no more than 10mins.

Temperature to Time examples:

  • 1°C = 1 minute submersion
  • 2°C = 2 minutes submersion
  • 3°C = 3 minutes submersion
  • 5°C = 5 minutes submersion
  • 10°C = 10 minutes submersion
  • 15°C = 15 minutes submersion

SAFETY & USAGE NOTES

MAINTENANCE, CLEANING & STORAGE

  • Before using your LUMI ice bath for the first time, please wash with warm soapy water, rinse and wipe down with a clean dry cloth.
  • Never clean your LUMI ice bath with a strong bleach-based detergents, as this may degrade the materials and waterproof seals.
  • To empty your LUMI ice bath, use the ‘Water Out’ drain plug. Take care with the drain tap, don’t force it and make sure turn it to the closed position after use and clean it regularly.
  • Though not essential, to ensure a long service life and for hygiene purposes, we recommend draining, cleaning and drying your LUMI ice bath every two to three weeks.

SAFETY INSTRUCTIONS

  • Your LUMI ice bath can be filled with cold or hot water up to 50°C. Always start filling with room temperature water, adjusting to your desired temperature as the LUMI ice bath gets closer to full.
  • Never fill your LUMI ice bath more than ⅔ full to compensate for your body mass and displacement of water when you enter. So it’s always best to start ½ full and adjust afterwards.

PRODUCT SPECIFICATIONS

  • Dimensions
    • 150cm length
    • 78cm width
    • 70cm height
  • Specifications
    • Ultra Durable Fibreglass Reinforced Skin-Friendly PVC
    • Solid Wall and Insulated Construction
    • High Pressure Structure – Max 8 PSI / 0.55 Bar
    • 480 litre capacity
    • 15kg weight (empty)
    • 480kg weight (full)
    • Suitable heights up to 6’7″ (2.1m tall)

CUSTOMER SERVICE

Access our library of free personal training videos and guides on our website to learn how to get the most out of your LUMI product and achieve the results you want.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals