LUMI LIGHTING 108018 Smart WiFi Doorbell User Guide
- June 5, 2024
- LUMI LIGHTING
Table of Contents
- PRODUCT DRAWING – FRONT
- PRODUCT DRAWING – BACK
- PRODUCT DRAWING – MOUNTING BRACKET
- PRODUCT DRAWING – BRACKET INSTALL
- POWER SUPPLY
- APP DOWNLOAD – SMART LIFE
- SMART WIFI VIDEO DOORBELL PARAMETERS
- APP GUIDE
- USER REGISTRATION
- ADD DEVICE
- GENERAL CONNECTION
- QR CODE CONNECTION
- DEVICE MANAGEMENT
- MODIFY DEVICE NAME
- DEVICE SHARING
- DEVICE INFO
- POWER MANAGEMENT SETTING
- BASIC FUNCTION SETTING
- MOTION DETECTION SETTING
- DOORBELL CALL PUSH MESSAGE
- PIR MOTION DETECTION PUSH MESSAGE
- MESSAGE CENTER
- FOOTNOTES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SMART WIFI DOORBELL
Quick Start Guide
| | | |
---|---|---|---|---
PRODUCT DRAWING – FRONT
1. PIR Motion Sensor
2. Light Sensor
3. 166˚ HD Camera
4. Microphone| 5. Push Button
6. LED Indicator
7. Speakers
---|---
PRODUCT DRAWING – BACK
8. AC14V~24V Power
Interface
9. Reset Button
10. Micro USB Port (Battery Charging)| 11. SD Card Slot
12. Battery Compartment
Cover
---|---
PRODUCT DRAWING – MOUNTING BRACKET
13. Screw Holes x 4
14. Wire Terminals
15. Mounting Hooks x 6
PRODUCT DRAWING – BRACKET INSTALL
- Push in and slide down
- Tighten to secure
- Tighten the screw at the base, use provided Allen Key
POWER SUPPLY
Hardwire power source | Powered by battery |
---|---|
![LUMI LIGHTING 108018 Smart WiFi Doorbell - Powered by |
battery](https://manuals.plus/wp-content/uploads/2022/05/LUMI-LIGHTING-108018 -Smart-WiFi-Doorbell-Powered-by-battery-464x550.png)
APP DOWNLOAD – SMART LIFE
https://testapp.tuya.com/smartlife?version=2.9.10&os=android
Download from App Store or Google Play, run the app on your smartphone, and set up the smart video doorbell, following the in-app instructions.
SMART WIFI VIDEO DOORBELL PARAMETERS
Smart WiFi Video Doorbell security solution provides the following functions: wireless connection, ultra-low power consumption, remote active wake-up, and quick start.
Main Processor | Hi3518E |
---|---|
Sensor | 1/4 COMS OV9732 |
Video | 1280’720@25fps |
H.264 Bitrate self-adaptive
Suitable for changeable network environments(3G,4G, or WIFI)
Audio| Two-way voice & Support echo cancellation
Built-in speaker
Built-in Microphone
View Angle| 166-degree Horizontal
Day & Night| IR-CUT double filter automatically switches
6pcs infrared LED 850mm
Min Illumination:1 Lux
Connection| Support WiFi 2.4 GHz, IEEE 802.11 began
AP Hot spot
Scan QR code
Storage| Support SD card 8G / 16G / 32G
Recording| Support smartphone local record records video playback
Optional recording time setting between 15s-45s, once doorbell triggered
ScreenShot| Support Smartphone screenshots
Working Condition| Press Button Directly PIR detection triggered Mobile phone
Control
Running up| System running up in a millisecond
Inform| Push message within 1 s-2s
Motion Detection| PIR motion detection, sensitivity High(2s)/ Medium(within
5s)/ Low (within 10 s)
Scene Mode| Backlight compensation Infrared night vision Quick movement HLC
D-WDR
Share| Support OR codeshare(one click generates QR-code, shares with others To
add your doorbell devices, join in the remote control. Maximum supports 7
authenticated users, supports users 3 views at the same time
Battery| 3.7V, 2pcs 18650 battery, 3350mAH, Rechargeable or (14V-24V AC
charging)
Power Consumption| Working 170mA, Standby 160pA
APP GUIDE
Download the Smart Life app on your mobile phone. Open the app and you will see the following guide page.
USER REGISTRATION
Register a new account. If you already have an account, simply log in.
ADD DEVICE
Select the following options “Add Device > Security & Video Surveillance > Smart Doorbell”
GENERAL CONNECTION
Remove “PULL” tags from the back of the device (if not done so already).
You should now hear a voice and the LED indicator should now be flashing red.
In the app, select “Make sure the indicator is flashing quickly or a prompt
tone is heard”. Then select “Next”.
Enter your WiFi password and confirm.
QR CODE CONNECTION
Hold the QR code up to the camera of the Ki device. You should hear a chime. Select “I heard a prompt”. Wait for the device to be added.
If the connection fails, ensure you have entered the correct password (the app
won’t specifically tell you that the password is incorrect). If the connection
fails again, press the ‘reset’ button on the back of the device and reconnect
your Ki to the app.
If you have tried the above and are still having issues, it is likely to be
caused by one of the following:
Poor strength of your wifi signal from the doorbell location.
Already paired to another smartphone (ie, family member/builder/electrician).
A new smartphone not be added if the old user still has their phone connected
to the Ki. To remove the Ki from a smartphone, navigate to the home screen in
the Smart life app and press the “settings” icon in the top righthand corner,
then scroll down to the bottom and press “remove device” Low power.
Recharge/replace batteries and ensure there is power coming out of the wall.
The smartphone is connected to a weak wifi source.
DEVICE CONNECTION STATUS DESCRIPTION
-
The red light is always blinking.
▶ Ready to connect to network mode, after a few seconds of waiting, with tone reminder. -
Flashing red, light blinks at one-second intervals.
▶ The device has entered the network connection mode. If the device successfully receives the broadcast or detects QR Code, there will be a prompt tone reminder.
▶ If the device failed to enter connection mode, possibly: 1) The WiFi router does not support broadcast transmission. We suggest changing QR code mode for connection. 2) It may detect QR code failed. We recommend highlighting the light of the smartphone screen. Put it directly in front of the doorbell lens. -
The blue light is always blinking.
▶ The device has entered the connection mode.
▶ If the device failed to connect with the network, possibly: 1) It may have timed out due to configuring to the correct WiFi account but using the wrong WiFi password. the device will stay unconnected status. We suggest reconfiguration of the network. 2) Device has been bound by another user’s smartphone. We suggest deleting the device and reconfiguring the network. -
The red light and blue light alternatively blink once every one second; the device is in normal standby mode. After wake-up status, if it remains unchanged, the device didn’t enter connection mode.
-
The blue light blinks once every one second; the device is in normal standby mode. After wake-up status, if it still remains unchanged, the device entered connection mode properly.
DEVICE MANAGEMENT
Click “…” on the live view page to enter device management.
MODIFY DEVICE NAME
Click “Modify Device Name” on the setting page to rename the device.
DEVICE SHARING
To share your Ki device with another user, navigate to the home screen and follow the following prompts highlighted in the images below:
DEVICE INFO
click “Device Info” to check device information.
POWER MANAGEMENT SETTING
Click “Power Manage” to check the power working status.
BASIC FUNCTION SETTING
Click “Basic Function Settings” to set below functions: indicator status; image reverse; time watermark; wide dynamic mode; IR night vision.
MOTION DETECTION SETTING
Select ”PIR” to set the sensitivity of the camera.
DOORBELL CALL PUSH MESSAGE
Press the doorbell and it rings. The device makes a call to a smartphone, select “Accept” to check the monitoring image or “Refuse” to end the call.
PIR MOTION DETECTION PUSH MESSAGE
Select push message to be notified if people stay in front of the device or move. The device will start recording.
MESSAGE CENTER
Click “Message Center” to check the history of push messages.
Telephone 1300 LIGHTS
Email sales@lumilighting.com.au
www.lumilighting.com.au
Kī TROUBLESHOOTING
STEPS FOR PROBLEM DIAGNOSIS
MY Kī IS NOT OPERATING
The unit will need to be fully charged for at least 24 hours prior to operating. When the unit is charged, all device management functions (recordings, battery/power, device sharing, motion sensor, etc.) can be accessed from the app. If the unit is hardwired (product code 108018HW), the hardwiring component will ‘trickle charge’ 1your unit.
A. Charge/restart your Kī
You will require a universal micro USB cable and a phone adapter.
-
Detach the Kī from the wall mount (if already installed). Remove the bottom screw and push the unit upwards to detach the unit from the wall mount.
Note: There is a screw at the bottom and six upward L-hooks2 on the wall mount that may break if pushed too hard. -
Insert the two batteries provided. This acts as a backup power supply.
-
Connect the Kī, micro USB cable, and phone adapter to a wall socket. Hold down the restart button until unit prompts are heard. The restart button is located at the back of the unit.
MY Kī IS NOT PAIRING
Completing part A is required. Refer to instruction manual – sections 8 to
11.2 with part B guides.
B. Step-by-step checklist
-
Ensure the correct app is downloaded. If the QR code does not work, check in the App Store/Play Store for ‘Smart Life’. Section 8 – select the correct logo.
-
Select ‘Smart Door Bell’ in the app. This can be found in the Video Surveillance category.
Section 10 – app interface may look different due to software updates. -
Check that only one admin device does the initial pairing, then invite other devices via invitation
-
Ensure that the WIFI connection is good and action according to screen instructions and when prompts are heard.
MY Kī SAYS ‘DEVICE HAS ALREADY BEEN CONNECTED TO ANOTHER USER’
The unit may have been paired by trade to check that it is in working order
and the device was not
removed from the app prior to handover.
C. Contact Lumi Lighting to speak to a team member
Please email
warranty@lumilighting.com.au with the
following details:
1. Name, contact number, builder contract or job number, and a screenshot of
the ‘binding prompt’.
LUMI LIGHTING PTY LTD ABN 35 634 478 247
Telephone 1300 LIGHTS (1300 544 487) Email
warranty@lumlighting.com.au Head
Offic e Unit 19, 52-60 Garden Drive Tullamarine VIC 3043
FOOTNOTES
FOOTNOTES CLARIFICATION
The hardwiring component will ‘trickle charge’ the unit, ie. regularly top up
the power. An additional 15W DC transformer (not included) will need to be
wired from the unit to the main power supply.
The wall mount consists of six upward L-shape brackets.
There is a screw at the bottom of the unit that secures the unit to the wall
mount.
This will need to be removed before detaching the unit. To detach the unit
from the wall mount, push upwards to release it from L-hooks and pull away
from the wall.
One admin will need to set up the device using the Smart Life app. Pairing
secondary devices are only possible by sharing/invitation from the admin
device. Do not create a mart Life account prior to receiving an invitation
from an admin device.
LUMI LIGHTING PTY LTD ABN 35 634 478 247
Telephone 1300 LIGHTS (1300 544 487) Email
warranty@lumlighting.com.au Head Office
Unit 19, 52-60 Garden Drive Tullamarine VIC 3043.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>