STARLINK B0D3Z8S7V2 Mini Mobility Mount User Guide

B0D3Z8S7V2 Mini Mobility Mount

“`html

Product Specifications:

• Dimensions: 162.3 mm x 82.3 mm x 55.5 mm

• Recommended Tools: Drill / Impact Driver, Drill Bit 6.5 mm
  (1/4in), Wrench 10 mm, Pen, Level

• Materials: Silicone, Lock Nut Washer, Sealing Washer

Product Usage Instructions:

1. Download the Starlink App

Scan the QR code to download the Starlink App.

2. Find Mounting Location

Your Starlink needs a clear view of the sky for connectivity.
Use the obstructions tool in the App to select a suitable mounting
location.

3. Remove Kickstand

Squeeze the release tab and pull it away from its fixed
location.

4. Mark Installation Location

Use the mount as a guide to mark the mounting hole locations.
Ensure correct orientation with the arrow pointing towards the
front of the vehicle.

5. Drill Mounting Holes

Drill holes using a 6.5 mm (1/4 in) drill bit.

6. Secure Mount to Surface

Insert bolts through the mount, add washers, and secure using
nuts. Use a 10 mm deep-welled socket for tightening.

7. Plug in Cable and Route Through Mobility Mount

Plug the power cable into your Starlink, route it through the
mobility mount opening.

8. Install Mobility Mount

Slide your Starlink into the mount until it clicks into place.
Ensure secure attachment to your vehicle.

9. Remove Your Starlink

To remove, push down on the release tab while pushing your
Starlink away from you.

Frequently Asked Questions (FAQ):

Q: Do I need any additional tools for installing the Mini

Mobility Mount?

A: The recommended tools provided should be sufficient for
installation.

Q: Can I install the Mini Mobility Mount on any vehicle?

A: It is recommended to ensure proper orientation and
compatibility with your vehicle before installation.

“`

| MINI MOBILITY MOUNT INSTALL GUIDE

MINI MOBILITY MOUNT What’s in the Box

Mobility Mount
Recommended Tools

Silicone

50mm

30mm

20mm

M6

M6

Lock Nut Washer

Sealing Washer

Drill / Impact Driver

Drill Bit 6.5 mm (1/4in)

Wrench 10 mm

Pen

Level

162.3 mm
(6.39 in)

82.3 mm
(5.51 in)

55.5 mm
(2.19 in)

INSTALL SCREW INSTALLATION 1 | Download the Starlink App
Scan the QR code to download the Starlink App.
2 | Find Mounting Location
Your Starlink needs a clear view of the sky so it can stay connected with satellites as they move overheard. Objects that obstruct the connection between your Starlink and the satellite will cause service interruptions. Use the obstructions tool in your App to ensure you have selected a suitable mounting location. You will also want to ensure your Starlink is mounted in the correct orientation relative to your vehicle as shown below.
3| Remove Kickstand
Squeeze the release tab and pull it away from its fixed location.

INSTALL
4 | Mark Installation Location
Use the mount as a guide to mark the mounting hole locations. Ensure the proper installation orientation of the mount on your vehicle. The arrow indicated on the mount points towards the front of the vehicle.

5 | Drill Mounting Holes
Drill holes using a 6.5 mm (1/4 in) drill bit.

6.5 mm (1/4 in)

silicone

INSTALL
6 | Secure Mount to Surface
Insert bolts through the mount and install a washer and sealing washer on the end of each bolt. Insert bolts through the pre-drilled holes and install a nut on the end of each bolt. Secure the mount to surface. Using a 10 mm deep- welled socket is recommended.
7 | Plug in Cable and Route Through Mobility Mount
Plug the power cable into your Starlink and ensure the cable is fully inserted. Route the power cable through the opening in the mobility mount and out the front end.

INSTALL
8 | Install Mobility Mount
Slide your Starlink into the mount until it clicks into place and ensure the Mobility Mount and Mini are securely attached to your vehicle.
9 | Remove Your Starlink
If you need to remove your Starlink, push down on the release tab on the mount while pushing your Starlink away from you.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>