kegel8 QSG82217 V For Men Pelvic Toner User Guide
- September 27, 2024
- Kegel8
Table of Contents
kegel8 QSG82217 V For Men Pelvic Toner
Specifications:
- Power Source: 1 x 9 volt battery
- Programs: P01-P08
- Duration: Varies per program
- Electrode Pads: Vary per program
Product Usage Instructions
Insert the Battery:
Remove the back cover, insert 1 x 9 volt battery, and ensure the black
battery cap is removed before replacing the cover.
Clean Your Probe:
Use a body-friendly, antibacterial spray to clean your probe thoroughly.
Connect Your Probe:
Insert the lead wire into Channel A at the top left of your unit. Connect your
probe to the lead wire connectors. Note: Some probes connect directly to the
device without needing a lead wire.
Turn On Your Device:
Press the on/off button once to turn on your device.
Insert Your Probe:
Apply a small amount of water-based lubricant on the metal parts of the probe
before insertion.
Select a Programme:
Choose your desired program by pressing the PRG button. Refer to the separate
program guide for more information.
Exercise:
Adjust the intensity using the A+ and A- buttons until you feel a slight
tingle. Start your program and enjoy the benefits of a stronger pelvic floor!
Clean and Store:
Clean your probe after each use and store it in the provided carry case along
with your unit. It is recommended to store the probe with the lead wires still
attached.
FAQ:
-
First Timer Sensation Levels:
If you don’t feel any tingling sensation, start with P01 at 50mA (or less) once a day for 4 weeks before moving on to P02. If sensation does not return after 4 weeks, seek medical advice. -
P02 Sensation Test:
If you feel a tingling sensation below 50mA, progress to a treatment program. If no sensation is felt, use P02 once a day for an additional 4 weeks.
Where to Place Electrode Pads:
- Sacrum
- Perineal
- Ankle
Choosing the Right Programme:
| Programme | Duration | Electrode Pads (recommended position) |
|---|---|---|
| P01 Sensitivity Test 1 | 60 minutes | N/A |
| P02 Urinary Incontinence 1 | 15 minutes | Sacrum/Perineal |
Please read the full manual for contraindications and further advice. If
unsure about the right program for you, feel free to contact us via phone,
email, or visit our website for assistance.
You can always reach out to us with any questions or concerns;
we are here to help!
Kegel8® V for Men
Quick Start Guide
- Insert the battery
- Remove the back cover and insert 1 x 9 volt battery before replacing the cover. Don’t forget to remove the black battery cap.
- Clean your probe
- Give your probe a quick clean with a body-friendly, antibacterial spray such as Kegel8® Cleaning Spray.
- Connect your probe
- Insert the lead wire into Channel A at the top left of your unit and connect your probe to the lead wire connectors Note: some probes connect straight into the device and do not need a lead wire.
- Turn on your Kegel8® V for Men
- Press the on/off button once to turn on your device.
- Insert your probe
- Squeeze a small amount of water-based lubricant, such as Kegel8 Conductivitiy Gel on the metal parts of the probe and insert.
- Select a programme
- Choose your programme by pressing the PRG button. See the seperate programme guide for more information.
- Exercise
- Press the A+ button until you feel until you feel a slight tingle. You can decrease this using the A- button. Start your programme and enjoy the benefits of a stronger pelvic floor!
- Clean and Store
- Clean your probe and store in the provided carry case with your unit. It’s best to store your probe with the lead wires still attached.
First timer? Let’s test your sensation levels
If this is your first time using the Kegel8® V for Men with a probe, then start with the P01 Sensation test. Increase the mAs until you feel a warm tingling sensation (No higher than 50mA).
- If you feel a sensation, move onto P02 Sensation Test.
- If you feel no tingling sensation, perform P01 at 50mA (or less) once a day for 4 weeks before moving on to P02.
NOTE: If you cannot feel sensation returning after the 4 weeks, please consult a medical professional for advice.
P02 Sensation Test – If you feel a tingling sensation below 50mA, progress to a treatment program. If you cannot feel a sensation, use P02 once a day for a further 4 weeks.
Where to place your electrode pads
You can use electrode pads on the skin for a variety of Kegel8® V for Men programmes. Simply connect your lead wire to the electrode pads and insert into channel A or B at the top of the unit. Use the corresponding controls to change the intensity. See below for examples of where you can place the pads and for more advice visit www.kegel8.co.uk
Choosing The Right Programme For You
The Kegel8® V for Men has a selection of programmes tailored to help you improve your pelvic floor strength.
Programme Duration Electrode Pad
(recommended position)
| P01 Sensitivity Test 1 | 60 minutes | N/A |
|---|---|---|
| P02 Urinary Incontinence 1 | 15 minutes | Sacrum/Perineal |
| P03 Urinary Incontinence 2 | 20 minutes | Sacrum/Perineal |
| P04 Bowel Incontinence | 40 minutes | Sacrum/Perineal |
| P05 Achieving a Satisfying Erection | 15 minutes | Sacrum/Perineal |
| P06 Urinary incontinence 3 | 20 minutes | Sacrum/Perineal/Ankle |
| P07 Pelvic Floor Strength | 60 minutes | Sacrum/Perineal |
| P08 Pelvic Floor Max Strength | 15 minutes | Sacrum/Perineal |
Please read the full manual for contraindications and further advice.
Not sure which programme is the right one for you?
Contact Us
- Call us: +44 (0) 1482 496 932
- Email us: info@kegel8.co.uk
- Visit us: www.Kegel8.com
Our friendly advisors are available
Monday to Friday, 8am – 4pm
You can feel comfortable in asking us anything.
We are not just a sales team. We are here to help you.
References
- Pelvic Floor Exercise Machines & Trainers | Kegel8
- Pelvic Floor Exercise Machines & Trainers | Kegel8