Kegel8 82217 V For Men Pelvic Toner User Guide
- June 6, 2024
- Kegel8
Table of Contents
Kegel8 82217 V For Men Pelvic Toner
Choosing The Right Programme For You
The Kegel8® V for Men has a selection of programmes tailored to help you improve your pelvic floor strength.
Programme Duration
P01 | Sensitivity Test | 60 minutes |
---|---|---|
P02 | Urinary Incontinence 1 | 15 minutes |
P03 | Urinary Incontinence 2 | 20 minutes |
P04 | Bowel Incontinence 1 | 40 minutes |
P05 | Achieving a more satisfying erection | 15 minutes |
P06 | Urinary incontinence 3 | 20 minutes |
P07 | Pelvic Floor Strength | 60 minutes |
P08 | Pelvic Floor Max Strength | 15 minutes |
PC1 PC2 PC3 | Custom programmes | Optional |
Not sure which programme is the right one for you?
We’re here to help! If you have questions or simply need some advice, please
send us an email and our advisors will be on hand to help.
info@Kegel8.co.uk
Alternatively, you can book a telephone call with on of our friendly advisors.
Visit:
www.kegel8.co.uk/schedule-a-call
Savantini House, Foster Street,
Hull, HU8 8BT, United Kingdom
HOW TO USE
- Insert the battery
Remove the back cover and insert 1 x 9 volt battery before replacing the cover. Don’t forget to remove the black battery cap.
- Clean your probe
Give your probe a quick clean with a body-friendly, antibacterial spray such as Kegel8® Cleaning Spray.
- Connect your probe
Insert the lead wire into Channel A at the top of the unit and connect your probe to the lead wire connectors.
- Turn on your
Kegel8® V for Men
Press the on/off button once to turn on your device.
- Insert your probe
Squeeze a small amount of water-based lubricant, like KE Gel, on the probe and insert.
- Select a programme
Choose your programme by pressing the PRG button. (See
the back page for help selecting
the right programme for you!)
- Exercise
Press the A+ button until you feel a strong but comfortable current. You can decrease this using the A- button.
Start your programme and enjoy the benefits of a stronger pelvic floor!
- Clean and Store
Clean your probe and store in the provided carry case with your unit. It’s best to store your probe with the lead wires still attached.
First timer? Let’s test your sensation levels.
If this is your first time using the Kegel8® V for Men with a probe, then
start with the P01 sensitivity test. Increase the mAs until you feel a
comfortable current – to a maximum of 50mA.
Perform P01 at up to 50mA twice a day for 4 weeks before moving onto a
different programme with your probe. If you do not feel any sensation after 4
weeks, please consult your doctor for advice as you could have nerve damage.
Where to place your electrode pads
You can use electrode pads on the skin for all Kegel8® V for Men programmes.
Simply connect your lead wire to the electrode pads and insert into channel B
at the top right of the unit. Use the channel B controls to change the
intensity.
You can wear the electrode pads in any of the placements shown below:
Visit www.kegel8.co.uk for more advice on how to get the most out of your electrode pads.