PowerPac PP6883N Socket Safety Extension Socket Instruction Manual
- September 28, 2024
- PowerPac
Table of Contents
- PP6883N Socket Safety Extension Socket
- Specifications:
- Product Information:
- Parts & Descriptions:
- Warnings:
- 1. Purpose and Safety:
- 2. Inspection and Precautions:
- 3. Power Requirements:
- 4. Wattage Rating:
- 5. Cable Length:
- 6. Switching On:
- Q: Can I use multiple extension cables in series?
- Q: How do I know if the Extension Socket is suitable for my
PP6883N Socket Safety Extension Socket
Specifications:
- Product Name: SOCKET_SAFETY EXTENSION SOCKET PP6883N
- Usage: Temporary extension solution
- Safety: Critical for electrical safety
Product Information:
Parts & Descriptions:
- Powerboard with Light
- Individual Switches
- Individual Socket Holes
Warnings:
ATTENTION:
-
Read the manual carefully for safe installation, use, and
maintenance. -
Follow basic precautions when using electrical appliances.
Product Usage Instructions:
1. Purpose and Safety:
Extension Socket must be used only for its intended purpose as a
temporary solution. Do not substitute it for permanent wiring.
2. Inspection and Precautions:
Before use, inspect the powerboard, cable, and plug for any
damage. If unsure, contact a qualified person for inspection or
replacement.
3. Power Requirements:
Check that the voltage and frequency ratings match those of the
device to be plugged in. Ensure proper grounding.
4. Wattage Rating:
Ensure the Extension Socket’s wattage rating exceeds the total
power requirement of all connected appliances. Do not exceed the
socket’s wattage capacity.
5. Cable Length:
Use an appropriate length power cable and avoid connecting
multiple extension sockets in series to prevent overheating and
equipment failures.
6. Switching On:
Do not use external timers or remote control appliances not
specified in the manual to turn on the Extension Socket.
FAQ:
Q: Can I use multiple extension cables in series?
A: It is not recommended to connect multiple extension cables
together as it can lead to overheating and equipment failures. Use
a single extension socket with the appropriate wattage rating.
Q: How do I know if the Extension Socket is suitable for my
device?
A: Check that the voltage and frequency ratings match those of
your device, and ensure that the wattage rating of the Extension
Socket is higher than the total power requirement of your connected
devices.
SOCKET_SAFETY EXTENSION SOCKET PP6883N
Please note that an extension cable is a temporary solution and is not meant
as a long-term extension of your household’s electrical system. DO NOT
substitute extension cables for permanent wiring. Have additional outlets
installed where you need them.
Using extension cables properly is critical to your safety. With continuous
use over time, an extension cable can rapidly deteriorate, creating a
potentially dangerous electric shock or fire hazard.
Parts & Description s
Powerboard Powerboard Light
Individual Switch z
Individual Switch light Individual Socket Hole
Hole
Warnings s
ATTENTION :
Read this booklet carefully as it contains important instructions for a safe
installation, use and maintenance.
Important instructions to be kept for future reference.
The following basic precautions should always be followed when using
electrical appliances:
1. Read all instructions before using the Extension Socket.
The Extension Socket
2. This Extension Socket must be used only for the purpose it was expressly
designed; any use NOT complying with the instructions contained in the manual
is considered inappropriate and dangerous. The manufacturer is NOT responsible
for possible damages caused by the inappropriate and/or unreasonable use.
3. The installation of the Extension Socket will be made in accordance with
the indications of the manufacturer. A wrong procedure may cause damages to
persons, animals or objects, for which the manufacturer cannot be considered
responsible.
4. Before use, check the integrity of the powerboard, power cable and plug.
DO NOT operate the Extension Socket when any of these are damaged. In case you
are not sure, contact a qualified person. If the device is damaged, it must be
replaced by the manufacturer or its service agent or a qualified technician in
order to avoid a shock hazard.
5. Before powering the Extension Socket make sure the rating (voltage and
frequency) corresponding to the grid and the socket is suitable for the plug
of the device, and that the wall socket is properly grounded. This device is
fitted with an earth wire for extra safety.
6. Check the Extension Socket’s wattage rating, which is the amount of
electricity it can safely transmit per second, and is provided either in watts
or in amps and volts. (Multiply the amps and volts together to get the wattage
rating.) The wattage rating must be greater than the appliance’s power
requirement. If you plan to plug multiple appliances into an extension socket,
add their wattages together to make sure the total DOES NOT exceed the
extension socket’s wattage rating.
7. Make sure to choose a power cable that’s long enough, and DO NOT attempt
to extend the length by connecting multiple extension sockets. This mistake
can lead to fires, equipment failures and electrocution. Power cable ratings
are determined by length. Plugging two cables together reduces their current
capacity in half which will result in voltage drop and overheating.
8. The Extension Socket must NOT be switched on using external timers and/or
other remote control appliances which are not specified in this manual.
9. Only use original components & accessories provided by the manufacturer.
Any non-original component or accessory NOT recommended by the manufacturer
(including those made by other manufacturers or by the same manufacturer but
for other models) may cause injuries to persons or damage to the Extension
Socket.
10. The packing materials (plastic bags, expanded polystyrene, etc.) must be
kept out of the reach of children or disabled persons since they represent
potential sources of danger.
Location
11. This Extension Socket is NOT suitable to be used or stored near heat
sources (open flame, ovens, heaters, stoves, etc.) and/or in an explosive
environment (in the presence of flammable substances such as gas, vapour, mist
or dust, in atmospheric conditions when, after ignition, the combustion is
spread in the air). Items containing these substances should never be placed
in the device, and never be used to clean the appliance in order to avert the
risk of fire or explosion.
12. The Extension Socket should NOT be placed on a surface, or in the
vicinity of objects which can be damaged by heat such as carpets or plastics.
DO NOT locate multiple Extension Sockets close to each other. During
operation, as heat is transferred away from the powerboard, the surface that
the powerboard is placed upon as well the surface immediately above or
adjacent to it may become very hot. If the powerboard is operated on wooden
furniture, use a protective pad to prevent damage to delicate finishes.
13. Avoid placing the Extension Socket’s power cable on abrasive or sharp
surfaces or in positions where it can be damaged easily. DO NOT damage a
cable’s insulation by dropping tools or materials on them, pinching them in
doors and windows or under heavy furniture, dropping tools or materials on
them, or letting them hang in the air while plugs are attached to the
powerboard.
14. Position the Extension Socket’s power cable carefully to avoid accidents.
Lay the cable around the edges of a room. Arrange the cable away from the high
traffic area, and where it will NOT be tripped over. The device should be
plugged into outlets in the same room where work is being performed. DO NOT
run the cable through walls, ceilings or floors. The cable must NOT be placed
under carpets, or covered with throw rugs, runners or similar. If a cable is
covered, heat cannot escape, which may result in a fire hazard.
15. DO NOT use or store the Extension Socket outdoors. Store and use the
device only indoors, or in any case, protected from weathering such as rain,
direct radiation of the sun and dust. Outdoor cables have insulation that
protects against moisture, sunlight and abrasion, so using an indoor cable
outdoors can create a fire hazard or result in electric shock.
Operation
16. If you are using the Extension Socket for the first time, you should:
a. Uncoil the Extension Socket’s power cable before use.
b. Clean the powerboard, cable and plug with a slightly damp cloth. Ensure
that the Extension Socket is completely dry before use.
DO NOT use metal scouring pads.
c. Place the Extension Socket on a horizontal, stable, dry and heat-resistant
surface. You may attach the device onto a wall with nails or screws.
d. Make sure to remove any label or protective sheet which may prevent its
proper functioning.
DO NOT:
cover the powerboard during functioning;
insert objects or body parts inside the protection cover of the appliance;
locate the powerboard near curtains or textiles;
leave the Extension Socket unsupervised during operation.
17. During operation, DO NOT touch the Extension Socket with wet body parts,
and it is recommended to have between you and the standing surface, an
isolating element (for example, wearing shoes with rubber soles).
18. DO NOT soak the Extension Socket in water or other liquids, wash it under
the tap, or let any liquid flow into the internal casing of the plug or
powerboard to prevent electric shock. In case of accidental fall in water, DO
NOT try to take it out, but immediately unplug the power cable from the
socket.
19. Switch the Extension Socket off by turning the individual switches (if
any) to OFF, switch the wall switch OFF and detach the 3-pin plug from the
wall socket. Thereafter detach the plugs of any appliances inserted into the
powerboard if it is NOT used for a long period, and before storing, cleaning
or performing any maintenance operation.
20. Insert and detach the Extension Socket’s 3-pin plug from the wall socket
holding it firmly with dry hands. Always detach the 3-pin plug to avoid
overheating. DO NOT pull the power cable, tug it or use it to drag the
powerboard.
21. In case of malfunction or anomaly during the functioning such as smoke
coming out of the appliance, switch the wall switch off immediately, unplug
the Adapter Socket and check the cause of the anomaly, if possible, with the
support of a qualified person.
22. This Extension Socket is NOT intended for commercial use but to be used
in households and similar applications, such as: Staff kitchen areas in shops,
offices and other working environments; By clients in dormitories hotels,
motels and other residential environments; Bed and breakfast type
environments.
23. This Extension Socket can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall NOT play with the Extension Socket. Cleaning and user
maintenance shall NOT be made by children unless they are older than 8 and
supervised. Keep the Extension Socket and its cable out of reach of children
less than 8 years old.
24. Save these instructions.
How to use s
1. Uncoil the Extension Socket’s power cable. 2. Ensure that the individual
switches (if any) on the powerboard are switched OFF. 3. Insert the Extension
Socket’s plug into the wall socket. 4. Lay the Extension Socket’s power cable
around the edges of a room. Avoid placing
the cable on abrasive surfaces or in positions where it can be damaged easily,
away from high traffic areas where it will NOT be tripped over. 5. Place the
powerboard on a cool dry surface, away from heat sources and away from
combustible surfaces or those sensitive to heat. 6. Insert the plugs of
appliances into the powerboard. When using multiple appliances, add their
wattages together to make sure the total DOES NOT exceed the Extension
Socket’s wattage rating. 7. Switch the wall switch ON. 8. Thereafter, switch
the individual switches on the powerboard ON. The LED neon power light on the
individual switch will light up and will go out when the switch is turned OFF.
9. When any appliance attached to the powerboard is to be switched off, switch
off the appliance, switch the individual switch OFF, and detach the plug of
the appliance from the powerboard. Repeat this step for any other appliance.
10. When the plugs of all appliances attached to the powerboard have been
removed, switch OFF the wall switch and remove the plug of the Extension
Socket from the wall socket.
How to clean s
1. Clean the Extension Socket only when its plug is removed from the wall
socket. 2. Wipe the exterior of the Extension Socket using a soft, damp cloth
or sponge.
Remove stubborn spots with a cloth moistened with mild liquid detergent. DO
NOT use abrasive scouring pads or powders. DO NOT attempt to clean the
interior of the device. 3. Never immerse the Extension Socket in water or
other liquids. 4. Ensure that the Extension Socket is completely dry before
use or storage.
ENVIRONMENTAL TIP s
This appliance, along with all other electronic appliances, should, when it is
no longer capable of functioning, be disposed with the least possible
environmental damage according to the local regulations in your area. In most
cases you can discard the appliance at your local recycling centre.
DISPOSAL: Do not dispose this appliance as unsorted municipal waste.
Collection of such waste separately for special treatment is necessary.
6.5 cm
26.5 cm
SPECIFICATION s
Model Cable Length Powerboard dimensions Individual Socket Switch Individual
Socket Light Number of 3-Pin Sockets 2-Pin Direct Surge Protector Safety
Shutter Maximum Current Maximum Power Voltage range
Frequency Wall-mountable Powerboard
PP6883N 6 m
26.5 (L) x 6.5 (B) x 2.5 (H) cm Yes Yes 3 Yes Yes Yes 13 A
3000 W 220 250 V~
50 60 Hz Yes
WARRANTY s
Warranty Conditions
1. This warranty provides against defective materials and manufacturing
faults throughout for two years from the date of purchase of the appliance
covering the Motor only, subject to correct usage of the appliance. The
warranty on the Compressor is 10 years; fluorescent light tubes of Mosquito
Insect Repellents is 6 months; rechargeable batteries are also 6 months; all
are subject to the same conditions as above.
2. This warranty also does not cover normal wear and tear, replacement of
consumable materials and accessories, and the cost of maintenance of the
appliance.
3. This warranty does not cover the repair or replacement of part/s damaged
by misuse, accidents, negligence, alterations, or modifications in any way, or
repairs done by any repair organisation without the prior consent of PowerPac
Electrical Pte Ltd.
4. Repair and service are to be performed at: 5 Changi South Lane #03-01
Singapore 486045. A transport fee will be charged for personal doorstep
service.
5. The original purchaser of the appliance must furnish proof of purchase to
our Service Centre with the email or number as registered during submission of
warranty when this appliance is sent for repair/service. Failure to do so may
delay the receipt of said repair/service by the customer.
6. Under no circumstances whatsoever shall the serial number be erased,
defaced or altered by the customer and/or his representatives, or the dealer
and/or his agents. Failure to ensure this shall invalidate the warranty.
7. This warranty is deemed to be void if the defect is cause by the attack of
household pests, fire, lightning, natural disasters, pollution, abnormal
voltage or the usage of generators.
8. This warranty is valid in Singapore only.
9. This warranty will be honoured subject to the customer’s registration of
the warranty inclusive of original invoice or valid purchase receipt. Failure
to present these documents will result in denial of service. However, if the
customer still requests that the defective appliance be repaired, PowerPac
Electrical Pte Ltd may, at its discretion, repair the appliance but impose a
labour charge, as well as the costs of the replacement parts, to be borne
solely by the customer.
10. Please refer to the attached picture for the location of one of our
appliance’s serial number, as an example.
Please complete the on-line registration warranty form available on our
website. There is no further requirement to send us any hard copy as part of
our efforts to save the environment.
In accordance with the terms and conditions of this limited warranty as stated
above, PowerPac Electrical Pte Ltd, at its expense shall provide free services
for the appliance within the warranty period from its date of purchase from
our Authorised dealers.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>