Recovery Protam Insulated Hard Wall Ice Barrel

“`html

Product Specifications:

• Product Name: LUMI Recovery PROTM Ice Barrel
• Includes: Insulated Hard-Wall Ice Barrel, Protective Thermo Top
  Lid, Carry Bag, Pump

Product Usage Instructions:

Unpacking and Setup:

1. Read the user manual thoroughly before using the LUMI Recovery
   PROTM Ice Barrel.

2. Register and activate your warranty on the website.

3. Follow the steps in the Quick Start Guide provided.

Safety Instructions:

1. Ensure the LUMI chiller unit stays upright on a stable surface
   during and after transportation.

2. Let the LUMI chiller settle for 24 hours after transportation
   before use.

3. Check for water leaks and ensure proper connections.

4. Plug the chiller unit into a suitable AC socket with surge
   protection.

5. Avoid water contact with the chiller unit and keep it dry at
   all times.

6. Always switch off the chiller unit during cold water therapy
   sessions.

7. If the unit malfunctions, unplug it immediately and do not
   use.

Quick Start Guide – Assembling the LUMI Ice Bath:

1. Place the ice bath on a stable surface.

2. Inflate the ice bath body and top lid using the provided
   pump.

3. Seal the valves after inflation.

4. If using an external chiller unit, place it at least 1 meter
   away from the ice bath.

5. Connect the Inlet and Outlet pipes securely.

6. Fill the ice bath with cold water until it reaches the desired
   level.

Frequently Asked Questions (FAQ):

1. Can I use the LUMI Recovery PROTM Ice Barrel without the

chiller unit?

Yes, you can use the ice barrel without the chiller unit for
non-cooling purposes.

2. How often should I clean the LUMI Recovery PROTM Ice

Barrel?

We recommend cleaning the ice barrel after each use to maintain
hygiene standards.

3. Is it safe to use the LUMI Recovery PROTM Ice Barrel

outdoors?

Avoid exposing the ice barrel to direct sunlight or extreme
weather conditions for prolonged periods to ensure longevity.

“`

USER MANUAL

TRUST THE PROCESS
We always end up right where we are supposed to be, right when we are meant to be there. Sometimes we just need a little time to recover.

lumitherapy

Follow this QR Code for our product guides and videos
YOUR JOURNEY BEGINS!
TAKE A MOMENT TO FIND OUT WHAT’S INCLUDED
1 x LUMI Recovery PROTM Insulated Hard-Wall Ice Barrel 1 x Protective Thermo Top Lid 1 x Carry Bag 1 x Pump
UNPACKING YOUR LUMI RECOVERY PRO BARREL
1. Read carefully through this user manual before using the LUMI Recovery PROTM Ice Barrel. 2. Go to our website to register and activate your LUMI warranty. 3. Complete the steps in the QUICK START GUIDE.
CUSTOMER SUPPORT If you have any questions about setting up or using your LUMI product, please visit our website for further information, faqs, troubleshooting and customer support.
2

WARNING
ELECTRICITY IS VERY DANGEROUS, IN ORDER TO PREVENT ACCIDENTS OR DEATH PLEASE PAY ATTENTION TO SAFETY AND ENSURE YOU FULLY READ
THIS INSTRUCTION MANUAL BEFORE USE.
1. During and after transportation, the LUMI chiller unit must stay upright on a stable surface at all times.
2. After transportation, and before use, the LUMI chiller must be left for 24hrs for the refrigeration gas to settle.
3. Make sure there are no water leaks from the LUMI chiller unit, or inlet and outlet pipes when connected to the Recovery Pod PRO.
4. Make sure the LUMI chiller unit is plugged into an AC socket or extension cable that is suitable for use, properly grounded, has a built in surge protector and preferably is IP65 rated.
5. Ensure the LUMI chiller unit is kept dry at all times, do not immerse, splash or spray the unit with water. If the unit does get wet, unplug it immediately and do not use.
6. Never leave the LUMI chiller unit switched on when using the Recovery Pro PRO, always ensure the unit is switched off during your cold water therapy session.
7. If the LUMI chiller unit stops working or doesn’t work when switched on, unplug it immediately and do not use.
8. We accept no responsibility for misuse or failure to use this equipment safely as instructed.
Disclaimer: It is not possible for LUMI Therapy to warn the user about every possible danger related to use of an ice bath or chiller unit for cold water therapy. The user must always use their own common sense and good judgement when using an ice bath.
3

QUICK START GUIDE
ASSEMBLE YOUR LUMI ICE BATH 1. Unpack and place your LUMI ice bath on a stable surface. 2. Inflate both the ice bath body and top lid using the supplied pump. 3. Ensure the pump is fully inserted into the valve, and pump until fully inflated recommended maximum pressure 8 PSI (0.55 Bar). 4. Once inflated, seal the valves using the safety caps.
5. If you are using the LUMI ice bath with an external LUMI chiller unit, place the chiller unit on a stable surface at least 1 meter away from the ice bath.
6. Connect both the Inlet and Outlet pipes and ensure all valves are ‘hand tight’.
7. Fill your LUMI ice bath with ‘cold water’ using a hose until the water is roughly 15 cm (6 inches) below the top (or approx. full to account for water displacement).
HOW TO EMPTY YOUR LUMI ICE BATH 1. If you are using the Recovery Pod PRO with the LUMI Chiller Unit, please ensure the LUMI Chiller Unit is switched off and unplugged before draining the water. 2. Unscrew the ‘Water Out’ drain plug to let the water drain out.
4

THERMO LID This high quality insulated lid is designed to add a thermal bridge between the ice bath water and the external elements, keeping the water at a steady temperature.
FULLY INSULATED Both the body of the barrel and the lid are insulated, keeping the outside weather from
affecting the internal water temperature.
PLUG & PLAY Quality built hoses easily connect between the chiller and the Lumi Recovery PRO Barrel, circulating fresh, clean, cold water.
5

EASY INFLATION Fully inflate the Recovery PRO Barrel in just 5 minutes for a super easy setup.
DURABLE CONSTRUCTION The Recovery PRO Barrel is made with ultra durable fibreglass reinforced skin-friendly PVC, which is easy to clean.
miniULTRATM chiller (optional extra) The LUMI miniULTRATM chiller is the industry’s best compact ice bath chiller and filtration combination. Quality construction, low maintenance, keeping the water clean with a changeable particulate filter, chilling the water down to 3°C (37°F).

PRO
ICE BATH

520 LT

*LUMI miniULTRA ChillerTM optional extra. 6

HOW LONG SHOULD YOU STAY IN COLD WATER?
Cold water therapy works best with the right combination of time and temperature. For example, if you are in water with a temperature of 10°C, we would recommend you stay for no more than 10mins.

Temperature to Time examples:
1°C = 1 minute submersion 2°C = 2 minutes submersion 3°C = 3 minutes submersion 5°C = 5 minutes submersion 10°C = 10 minutes submersion 15°C = 15 minutes submersion

Follow this QR Code to access our quick breathing guide to help you get started with your cold water therapy experience

8

SAFETY & USAGE NOTES
MAINTENANCE, CLEANING & STORAGE
Before using your LUMI ice bath for the first time, please wash with warm soapy water, rinse and wipe down with a clean dry cloth.
Never clean your LUMI ice bath with a strong bleach-based detergents, as this may degrade the materials and waterproof seals.
To empty your LUMI ice bath, use the ‘Water Out’ drain plug. Take care with the drain tap, don’t force it and make sure turn it to the closed position after use and clean it regularly.
Though not essential, to ensure a long service life and for hygiene purposes, we recommend draining, cleaning and drying your LUMI ice bath every two to three weeks.
SAFETY INSTRUCTIONS Your LUMI ice bath can be filled with cold or hot water up to 50°C. Always start filling with room temperature water, adjusting to your desired temperature as the LUMI ice bath gets closer to full. Never fill your LUMI ice bath more than full to compensate for your body mass and displacement of water when you enter. So it’s always best to start ½ full and adjust afterwards.
9

PRODUCT SPECIFICATIONS
Dimensions 100cm diameter 95cm height Suitable heights up to 6’7″ (2.1m tall)
Specifications Ultra Durable Fibreglass Reinforced Skin-Friendly PVC Solid Wall and Insulated Construction High Pressure Structure – Max 8 PSI / 0.55 Bar 520 litre capacity 15kg weight (empty) 520kg weight (full)

© Lumi Therapy Ltd.

Made in China 10

Access our library of free personal training videos and guides on our website to learn how to get the most out of your LUMI product and achieve the results you want.

lumitherapy.co.uk

@lumi.therapy

@Lumitherapyuk

THERE ARE NO LIMITS

References

• LUMI - Home of the Recovery Pod™ Ice Bath & miniPRO™ Massage Gun – LUMI Therapy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>