LOEWE We. BEAM Laser Display Projector User Manual
- September 27, 2024
- LOEWE
Table of Contents
- LOEWE We. BEAM Laser Display Projector
- Product Information
- Product Usage Instructions
- FAQ
- Introduction
- Scope of delivery
- General Safety Instructions
- Disposal
- Declaration of Conformity
- Product Overview
- Remote control
- Focus Adjustment And Keystone Correction.
- Bluetooth Connection
- Technical data
- Troubleshooting
- Licenses
- FCC STATEMENT
- Contact
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LOEWE We. BEAM Laser Display Projector
Product Information
Specifications
- Audio: 2×5/2×10/2 Dolby Audio
- Operating System: SL6 / os6 / (Linux) / (NetRange) / 41
- Connectivity: Miracast
- Ports: 1 x USB-A / 1x USB-C 5V / 1A 20V / 3.25A
- Wireless: 802.11ac 2.4G/5G 2T2R
Product Usage Instructions
Safety Precautions:
- Avoid looking directly into the projection beam.
- Ensure children are supervised and do not look into the projector beam.
- Keep the projector away from rain or moisture (operating humidity 20%-80%).
Setup and Installation:
- Position the projector on a stable surface.
- Connect the necessary cables, such as HDMI or USB, to the projector.
- Power on the projector using the remote control or the power button on the device.
Bluetooth Connection:
To pair your device via Bluetooth:
- Make sure Bluetooth is active on your device and visible to other devices.
- Press the power key on the remote and follow on-screen instructions to pair your device.
Adjustments and Settings:
- Use the remote control for focusing adjustments.
- Use trapezoid correction for optimal image alignment.
FAQ
- Q: Can this projector be used in all EU member states?
- A: Yes, this product can be used in all EU member states.
- Q: What are the safety standards related to laser usage for this projector?
- A: The projector complies with safety standards including EN 50689:2021 and IEC/EN 62471-5:2015.
Introduction
Thank you. for choosing a We. by Loewe product.
We are happy to welcome you as a customer. At Loewe, we combine the highest
standards of technology, design and user friendliness. We. by Loewe stands for
innovative, functional and intuitive product design. The We. by Loewe products
are closely linked to Loewe’s more than one hundred years of design tradition
and carry its core values into the future.
We want to you use the projector for a long time without any problems. Please
read the General as well as the Laser Safety Instructions on the next page,
before putting the projector into operation.
Scope of delivery
- We. BEAM
- Power supply with fix cable (USB-C) and 3 different power plugs (CE, UK, AU)
- User manual
- Remote control (incl. 2x AAA batteries)
Position of the rating plate
- Label with model number and operating voltage can be found on the bottom of the device.
Apps
Scan the QR code below with your phone and download the recommended app.
The “my Loewe” app is an entry point to the Loewe world and gives you access
to all user manuals for your Loewe products.
User Notice
- Read this manual carefully before operating or maintaining this product, and retain the manual for future reference.
- Illustrations of product, accessories, and the user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
General Safety Instructions
Before using the product, make sure to carefully read the following safety instructions. Disregarding these safety instructions may result in damage to the device and/or your health.
- This symbol informs the user about risks caused by high voltages.
- This symbol informs the user about high temperatures due to heat build-up inside the device.
- This symbol informs the user about risks that may result in a fire.
- This symbol informs the user about important handling and maintenance related information.
- This symbol informs the user about risks caused by laser radiation.
Warning: Do not stare into the projection beam.
Safety hints:
- Supervise children and never allow them to stare into the projector beam at any distance from the projector.
- Use caution when using the remote control for starting the projector while standing in front of the projector lens.
- Avoid using optical aids such as binoculars or telescopes when standing in the projector beam.
Safety Precautions:
- Only use the provided genuine power adapter to prevent electric shocks and fire hazards.
- Do not attempt to disassemble this product, as it contains non-insulated, high-voltage sources that can cause electric shocks. Coming into contact with any internal component may result in an electric shock.
- This projector must only be maintained and repaired by a qualified or authorized technician.
- Do not expose this projector to rain or moisture (operating humidity is 20%–80%).
- Do not immerse this projector in, nor expose it to water or other liquids. Immediately unplug the projector if any liquid or object got into its housing, and have it checked by a qualified technician before using it again.
- Unplug the projector from the electrical outlet during thunderstorms or when it is not being used for a long time, so as to avoid damage caused by a power surge or lightning strike.
- Do not block any of the vents as this may cause heat build-up inside the projector, and possibly result in a fire.
- Do not place any flammable objects near this projector so as to avoid fire.
- Do not block the lens when the projector is turned on.
- Any object placed close to the lens may get very hot and/or deformed, and may even cause a fire.
- Do not look directly into the lens when the projector is turned on to avoid eye damage.
- Do not place this projector on an unstable platform, stand or table so as to prevent it from falling and causing serious damage or personal injury.
- Do not place this projector in any of the following environments:
- In poorly ventilated or narrow spaces
- Near devices that produce a strong magnetic field
- In direct sunlight
- In extremely hot, cold or humid environments
- Close to a fire alarm
Transportation instructions: It is recommended to transport this projector in its original or similar packaging.
Disposal
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste.
Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. You may also hand over the device to your dealer for disposal, when buying a new comparable device. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
The original equipment batteries do not contain harmful substances such as
cadmium, lead or mercury.
Used batteries should not be disposed of in household waste.
Dispose of used batteries free of charge in the collection containers set up
at the dealer or at the public collection points.
The end user is responsible for ensuring that the data on the old device is
deleted before disposal by resetting it to the factory settings.
Disposal of packaging
Declaration of Conformity
EU Declaration of Conformity
Hereby, Loewe Technology GmbH declares that the radio equipment type We. BEAM complies with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following Internet address: https://www.loewe.tv/int/support
This product can be used across all EU member states.
Due to the 5 GHz frequency range of the built-in WLAN module, use in the following countries is only permitted inside buildings:
AT | BE | BG | CZ | DK | EE | FR | DE | IS | IE | IT |
---|---|---|---|---|---|---|---|---|---|---|
EL | ES | CY | LV | LI | LT | LU | HU | MT | NL | NO |
PL | PT | RO | SL | SK | TR | FI | SE | CH | UK | HR |
- Under normal use of, this device should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
- There is a risk of explosion if the battery is replaced by an incorrect type.
- Cutting, mechanically crushing or putting a battery into an oven or a fire can result in an explosion.
- Leaving a battery in an extremely high temperature environment can result in an explosion or the leakage of flammable liquid or gas.
- Subjecting a battery to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Laser safety information:
- This device complies with IEC 60825-1:2014 Class 1 and RG2 IEC 62471-5:2015.
- This device complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5:Ed. 1.0. For more information see Laser Notice No. 57, dated May 8, 2019.
Warning: Do not stare into the projection beam.
Product Overview
Exterior
- Projection lens
- We. by Loewe logo with light indication
- Speaker
- 1/4” female threaded tripod mount (6*1mm, suspended ceiling installation supported)
- Heat dissipation vent
- On/Off button
- Label location
The air vents allow the air to exchange internally and externally. Do not
place any objects within 20 cm of the air vents.
Do not look directly into the lens to avoid eye damage as the projector will
emit strong light during working.
If you plan to mount the projector on a suspended ceiling, make sure to select
the right screws and bracket for it.
Connection Ports
- On/Off button
- USB port
- HDMI ARC
- 3,5mm headphone jack
- Power in USB-C
Remote control
Remote control button mapping
Changing and inserting batteries
- 1. Slide the cover down to open the battery compartment on the backside of the remote
2. Insert two AAA batteries
3. Slide the cover back on and close the compartment
Pairing the remote
- When pairing the remote for the first time, follow the instructions shown in the projection.
- To pair the remote manually with the device, press and hold the power button on the WE. BEAM for more than 5 seconds, then follow the instructions.
Focus Adjustment And Keystone Correction.
Focus Adjustment
Press the focus key on your remote to enter the manual focus menu. Follow the instructions in the projection. To enable autofocus, open the Settings > Image
Focus.
Keystone Correction
Keystone corrects image distortions that occur when the beam hits the projection surface at an angle. When auto Keystone Correction is active, the projector will automatically adjust the image whenever the device starts up or when it has been moved significantly. To activate auto Keystone Correction, open the Settings > Image > Keystone. You can also adjust the image manually by carrying out the Four Points and the Four Sides corrections yourself.
Bluetooth Connection
There are two options to connect audio devices via Bluetooth.
Option 1
- Open settings > Bluetooth > Scan to search for devices nearby.
- Your device should be displayed in the section “Available devices”. Select your device to pair it with the projector.
Option 2
- Press the power button on your remote and select “Bluetooth Speaker” in the following pop-up menu. Select your device to pair it with the projector.
Note: Please make sure Bluetooth is active on your device and it is visible to other devices.
Technical data
We. BEAM
Image
Resolution (pixels) | Full HD (1920 x 1080) |
---|---|
Display technology / DMD eye protection | ALPD laser / ● [0,23“] / ● |
Diagonal (ca. cm/inch) / Response time (ca. ms) | min. 100/40 – max. 300/120 / |
1
Luminance (ca. lumen) / Viewing angle| 500 / 120°
HDR / color gamut| HDR10 / Rec. 709
Life span @ normal mode (ca. h)| 25.000
Uniformity / contrast ratio (FOFO)| min 85% / typ. 500:1
Offset / Projection ratio| 1 / 1,2:1
MPEG / MPEG2 / MPEG4 (H.264) / HEVC /H.265)| ● / ● / ● / ●
Auto: focus / keystone / screen align / obstacle| ● / ● / – /-
Noise level @ normal mode (ca. dB, 25° C, 1m)| max. 30
Audio
Output (ca. watts sine / music) / driver (active + passive)| 2 x 2,5 / 2 x 5 /
2
---|---
Dolby: Audio / Digital / Digital Plus / Atmos / DTS: HD| Dolby Audio
Operation and apps
Loewe chassis / os / home screen / app store| SL6 / os6 / ● (Linux) / ●
(NetRange)
---|---
my Loewe app / smart apps (all: Android + iOS)| ● / –
Menu languages / Context related help| 41 / –
Parental Lock / Automatic turn-off / Timer| – /● / ●
Software update (via USB / Internet) / Hotel Mode| ● / –
Multimedia
Loewe dr+: streaming server / client | – / Miracast |
---|---|
Music player / Photo player / Video player | ● / ● / ● |
Media player / DLNA renderer / web apps / browser | ● / – / ● / ● |
YouTube / Amazon prime video / Netflix / Disney+ / Apple tv+ | ● / ● / ● / – / |
–
Connectivity and Interfaces
HDMI | 1 |
---|---|
HDCP 1.4 / HDMI-CEC / ARC / eARC | ● / ● / ● / – |
USB | 1 x USB-A / 1x USB-C |
USB-A power | 5V / 1A |
USB-C power | 20V / 3,25A |
Bluetooth / Miracast / AirPlay | ● / ● / – |
LAN network connection / WLAN (Wi-Fi) / DTS Play-Fi | – / ● / – |
Audio out control: fix / variable (3.5 mm jack) | ● / ● |
Troubleshooting
Problem | Solution |
---|---|
No projected image | Turn off the projector and disconnect from the power, then |
plug in the power cord and turn on the projector.
Operating system crashes| Turn off the projector and disconnect from the
power, then plug in the power cord and turn on the projector.
Screen display error| Turn off the projector and disconnect from the power,
then plug in the power cord and turn on the projector.
Remote control is miss- ing or not paired and the projector cannot be turned
on remotely.| Turn off the projector and disconnect from the power. Wait for
five minutes, then plug in the power cord and turn on the projector. After the
projector has been restarted, pair the remote control again.
Projector overheats and shuts off| Please remove any obstacles from the air
inlets and outlets so as to ensure a smooth airflow through the projector.
Follow the instructions above to restart the projector.
Other internal system errors| Please contact a qualified technician to service
the device, or return the projector to the after-sales department. Please find
the contact details of the Customer Care Center on the backside of this
manual.
Local Loewe Service partner
Licenses
- The ALPD® word mark and logos are registered trademarks owned by Appotronics Co., Ltd., and any use of such marks by Loewe Technology GmbH is under license. Other trademarks and trade names are those of their respective owners.
- Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
- The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG Inc. and any use of such marks by Loewe Technology GmbH takes place under license. Other trademarks and trade names are those of their respective owners.
- The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
FCC STATEMENT
FCC Information: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipmet complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information: The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person’s body.
IC information:
This device complies with Industry Canada Licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- FCC ID: 2AZD4-BEAM
- IC: 2731-BEAM
Contact
Loewe Technology GmbH
- Customer Care Center
- Industriestraße 11 96317 Kronach, Deutschland
- Tel +49 9261 99-500
- E-mail: ccc@loewe.de
- loewe.tv
Printed in Germany
Edition 1, 04.24 MJ/JK/LC/SB/PH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>