Wowitoys Folding Elf H4805 Rc Toy-Drone User Manual

Folding Elf H4805
User Manual

The product user guide contains product features, how to use them, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
+44 (0)203 514 4411

Importer www.alza.cz

Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,

Disclaimer & Warnings

Please read this Disclaimer & Warning and Safety Guidelines carefully before using our product. This product is not recommended for people under the age of 14. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any damages caused while using this product, and its consequences. You agree to use this product only for purposes that are proper and in accordance with local regulations, terms, and all applicable policies and guidelines WOWITOYS may make available.

When using this product, please be sure to strictly abide by the specification requirements and safety guidelines stated in this document. Any personal injury property damage, legal disputes, and all other adverse events caused by the violation of the safety instructions or due to any other factor will not be WOWITOYS’s responsibility.

• The drone is designed for 14+
• Adult supervision is always advisable with any form of flying toy
• Always ensure your flight area is free of all obstacles before taking off, and ensure the drone is always flown in excess of 1.5 meters from yourself and others
• Remove all batteries from the drone and controller when not in use
• Never overcharge
• Never leave to charge unattended
• Never touch the drone’s motors during or after as they can get hot
• Never touch the blades when they are in rotating
• If the drone becomes damaged, stop using it immediately
• Do not dispose of any parts of the drone or controller in the normal rubbish, all parts should be taken to your local recycling center
• The battery in the drone should never be exposed to any form of high temperature or disposed of in a fire

Safety Guidelines

Check Before Use

• This product is not a toy, but it is a high-precision drone that integrates various electronic stability and control mechanisms. Please be sure to set up this drone carefully and correctly to ensure safe, accident-free operation.
• Please be sure that the batteries of the drone and transmitter are clean, undamaged, and have enough power.
• Please be sure that all the propellers are undamaged and are installed in the right orientation.
• Please do a thorough check of the product before each use. Check for the firmness of the parts, any signs of cracks and wear of the propeller, battery power, and effectiveness of the product until the issue has been taken care of.

Safe flight Environment

• Make sure the surrounding area is free of all people, pets or other obstacles before you start to fly your drone
• Your drone is designed for indoor or outdoor use. However, it is not recommended to fly the drone inside if there is limited space, or outside if there is any wind.
• Keep a safe playing distance between you and the drone at all times.

Use of Battery

• Please ensure batteries are fitted in the correct orientation as shown in the instruction manual.
• Avoid short circuits by fitting the batteries incorrectly, and do not crush or squeeze the batteries as this could carry the risk of an explosion.
• Do not mix new and old batteries as this can lead to poor performance of the product
• Dispose of used batteries carefully.
• Please keep dead batteries away from heat and fire.
• If the device is not going to be used for an extended period of time, remove batteries to prevent potential damage from battery leakage.
• It is recommended to only use the USB charging cable that comes with the drone to charge the battery.
• Don’t connect the battery directly to wall outlets or car cigarette-lighter sockets.
• Don’t attempt to disassemble or modify the battery in any way.
• Don’t use the battery if it gives of an odor, generates heat, becomes discolored or deformed, or appears abnormal in any way. If the battery is in use or being charged, remove it from the device or charger immediately and discontinue use.

Controller functions

3 Pcs of AAA“ batteries (not included)

• Always use alkaline batteries
• Never mix old and new batteries

1. Unscrew the battery cover and insert 3xAAA batteries (not included), Make sure you insert them following the correct polarity as shown
2. Re-attach the battery

Drone’s details

It is crucial that all the propellers are installed in the correct position (Pay attention to the letter L or R printed underneath each propeller.)

Power switch at the bottom of the drone

Assembling protective guard

Align the protective guard with the bottom of the motor and press it into place.

Charging the drone battery

• Remove the battery from the drone & insert the charging wire into the battery charging slot
• Connect the USB charger (square socket) to a computer, the USB the indicator will glow red
• The red light will go off when the drone is fully charged

WARNING
Do not leave the battery unattended while charging & only use the supplied battery or plug charger.

Pairing your drone to the controller

1. Turn on the drone. The LED on the drone will start to flash. Place the drone down on a flat surface
2. Turn on your controller. Your controller will beep once & LED light will flash
3. Push left throttle up once & controller will beep once
4. Pull left throttle down once & the controller will beep once. Pairing is complete once the drone lights & controller lights stop flashing

Flying your drone

Taking Off/ landing:
Taking Off

Method 1:
Press the one key start button, the propellers will rotate without taking off.
Push up the throttle left stick to take off.
Method 2:
Push the throttle left stick up until the propellers rotate without taking off and then push up the throttle left stick again to take off.

Landing
Method 1:
Press the one key stop button, the drone will land by itself
Method 2:
Push the throttle left stick down until the drone lands
Altitute & rotate:

Use “throttle left stick“ to control the altitude & rotation during flight.

Forward / backward / left / right:

Use “throttle right stick” to control forward, backward, left & right movement during flight.

Trimming

If the drone sways in an unprompted direction, use the trim buttons to correct the flight:

1- Forward trim
2- Backward trim
3- Left trim
4- Right trim

Features

1. Speed modes:
   Select between 3-speed modes:
   40% speed (controller makes 1 beep);
   60% speed (controller makes 2 beeps);
   100% speed (controller makes 3 beeps)

2. o 2. 360 Flips: Perform 360 o flips by pressing the “flip” button & immediately after pressing the “throttle right stick” in the desired direction.

3. Headless mode: In order to activate this mode, press the headless button you hear continuous beeps, the drone will displace according to the direction of the stick command do no matter where the drone is pointed at. Press the headless button again, to go back to the normal mode.

4. LED:
   Press the LED button to turn off/on the lights.

5. Emergency Stop:
   **** Only stop motors mid-flight in an emergency situation, Doing so can reduce the risk of damage or injury.

Long pressing this button for three seconds will activate the emergency stop function.

Resetting the drone

If you are experiencing issues controlling the drone & it is not responding correctly to the controller, it can be reset by the following steps :

1. Turn on the drone & controller, place the drone on flat ground (it is very important), then push the left throttle of the controller up & down once to pair with the drone.
2. Then push both the left & right throttle of the controller to the left-down corner (7 o’clock direction). This will reset the drone to its original factory settings & will be ready to fly again.

Trouble flying

The indicator lights of the drone are flashing and do not respond to the
transmitter.| The transmitter is not synced to the drone.
Insufficient battery power.| Refer to the preparation for FLIGHT and pair again. Recharge the battery.
The propellers spin, but the drone cannot take off.| Insufficient battery power. The propellers are installed in the wrong orientation.
The propellers are distorted.| Recharge the battery. Install the propellers in the right orientation.
Replace the propellers.
The drone sways sharply.| The propellers are distorted.| Replace the propellers.
A drone cannot stay balanced in flight.| The propellers are distorted. The motor doesn’t work properly.| Replace the propellers. Replace the motor.
The drone is out of control after crashing.| The Six-axis acceleration sensor lost its balance after crashing.| Restart and re-calibrate the drone.

Specification

Drone

Transmitter

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized: Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person, or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage, and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.

If anyone has made modifications, modifications, alterations to the design, or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
Subject of the declaration:
Title: Folding Elf
Model / Type: H4805
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. (EU) 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
Prague, 16.3 2021

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>