LOEWE bild i.77 dr+ Smart TV User Manual

LOEWE bild i.77 dr+ Smart TV

Product Information

Product Name: Loewe bild i Available
Models: bild i.77 dr+, bild i.65 dr+, bild i.55 dr+, bild i.48 dr+
Languages: DE (German), EN (English), NL (Dutch), FR (French), IT (Italian), ES (Spanish), PT (Portuguese)

Product Usage Instructions

Safety/Warnings:

• The product contains symbols indicating different risks and hazards. Please refer to the user manual for detailed information.
• Pay attention to transportation, power supply, air circulation, and high temperatures during setup.
• Make sure to disconnect the TV from the power source before cleaning.
• Follow the manufacturer’s instructions when using stain removers or chemicals for cleaning.

Remote Control Buttons:

The remote control layout may vary depending on the application (TV/Video/Audio/Photo/Apps) and function (e.g., dr+, EPG, Teletext, HbbTV). Refer to the user manual for specific button functions.

Preparation of Remote Control:

• Remove the battery protection strip from the remote control before use.
• Insert or replace the batteries according to the instructions provided.
• Connect the antenna cables based on the type of antenna (terrestrial/cable/satellite) using the designated ports.

Connection of Soundbar (klang bar i):

• Connect the soundbar to the TV using the appropriate audio output/input ports. Please refer to the complete user manual for detailed instructions on setup, usage, and troubleshooting.

Loewe bild i

bild i.77 dr+ bild i.65 dr+ set | bild i.65 dr+ bild i.55 dr+ set | bild i.55 dr+ bild i.48 dr+ set | bild i.48 dr+
DE Betriebsanleitung EN User Manual NL Gebruiksaanwijzing FR Manuel de l’utilisateur

IT Manuale utente ES Manual de uso PT Manual do Utilizador

Introduction

Many thanks for choosing Loewe and placing your trust in us.
By opting for Loewe, you have not only chosen a modern and technically innovative television, but also gone for timeless design, razor-sharp picture quality, brilliant sound for film and music enjoyment as well as intuitive operation with the Loewe remote control, smart phone or tablet.
In short: Loewe stands for optimal home entertainment.
We wish you much pleasure with Premium Home Entertainment from Loewe and we are glad to have you as a customer.
With the aim of a safe and long-term fault-free use of the set, before putting the TV set into operation, please read the chapter Safety/ Warning on the next page.

Delivery specification

Installation instructions Loewe bild i dr+ Loewe klang bar i (depending on model, provided in separate carton box) Loewe table stand i rotation unit (depending on model) Loewe table stand i plate
(depending on model) Loewe wall mount universal (bild i.77 dr+) Loewe welcome box:
Loewe remote control with two alkaline batteries type AAA Mains cable User Manual (this document) Installation instructions for table stand i Screws for installation of setup solution Tool set for installation of setup solution

Documentation
This part of the operating manual contains essential basic information. The device is commissioned and set up by means of the intuitive operation guide after the device has been switched on for the first time. A detailed user handbook describing the functions and features of your new Loewe set can be downloaded in electronic form from the Loewe website.
The user handbook is updated regulary. Please find a detailed user handbook here: www.loewe.tv/int/support You will also find the FAQ (frequently asked questions) there.
Position of the rating plate
Label with model number and operating voltage can be found on the back of the TV set.

20

deenutglisschh

Loewe bild i | User Manual Safety/Warning

Safety/Warning
For your safety, and to avoid unnecessary damage to your unit, please read and follow the safety instructions below.
Key
This symbol indicates risks caused by high voltages.
This symbol is to alert the user to other, more specific risks.
This symbol indicates dangers caused by the development of fire.
This symbol indicates dangers caused by sharp edges.
Do not remove set rear panel
Warning: When opening or removing the rear panel, there is the danger of electric shock and the risk of serious injury from high voltages.
ATTENTION
ELECTRIC SHOCK DANGER ­ DO NOT OPEN
Never open the rear panel yourself. Leave repairs and servicing work on your TV set to qualified, authorised television technicians.
Please contact your dealer or our customer service.
Intended use and environmental conditions
This TV set is intended exclusively for the reception and playback of picture and sound signals. The TV set is designed for dry rooms (living rooms and office spaces). It must not be used in rooms with a high level of humidity (e.g. bathroom, sauna) or outdoors. High humidity and dust concentrations lead to power leaks in the set. This can lead to danger of injury and damage to the set by electric tensions or a fire. If you’ve brought the set from the cold into a warm environment, leave it off for around an hour due to the formation of condensation. Do not place objects filled with liquid over the set. Protect the set from dripping and splashing water. Candles and other open flames must be kept away from the set at all times to prevent the fire from spreading. The materials we used in this device comply with all regulatory requirements. However, the migration of substances cannot be ruled out. We therefore suggest you avoid permanent contact between food and the TV set.

Ambient temperature: 5° C ­ 40° C
Relative humidity (non-condensing): 20 ­ 95%
Air pressure: 800 ­ 1114 hPa (0 ­ 2000 m above sea level)
Transport
Improper handling during transportation can lead to damage to the display and risks of injury.
The screen consists of glass or plastic and can break if handled improperly.
At least two people are required to transport the set. Only transport the set in a vertical position.
No pressure should be applied to the glass or the plastic during transport.
The correct unpacking of the set is shown in the operating manual 1.
To avoid damaging the mechanical structure of the TV set and the floor stand, remove the TV set from its base and move the two parts separately. When the TV set is set up in its new location, at least 2 people are required to reassemble it.
Mains cable/power supply
Unplug the power cord immediately from the mains socket if you notice something unusual, or the unit shows recurring malfunctions.
Incorrect voltages can damage the set.
This set may only be connected to a mains power supply with the voltage and frequency indicated on the rating plate using the enclosed mains cable.
The mains power plug of the TV set must be easily accessible so that the set can be disconnected from the mains at any time.
When pulling the mains power plug out, do not pull the cable but the plug housing. The cables in the mains power plug could be damaged and cause a short circuit when plugged in again.
A mains power cable with a damaged insulation can lead to electric shock and presents a fire hazard. Never use a damaged mains cable.
If you use a portable multiple socket to connect the TV set, do not cascade several multiple sockets consecutively.
Air circulation and high temperatures
Like any electronic device, your TV set requires air for cooling. If air circulation is impeded, it may result in a fire.
The ventilation slots on the rear panel of the set must therefore remain free. Please do not cover the set.

Wall mounting: Leave at least 10 cm of space all around the set at the side, above and below.
Table / stand foot: Leave at least 10 cm clear space around the set at the side and at the top.
Foreign bodies
Foreign bodies inside of the set can lead to short circuits and fires.
Danger of injury and damage exists.
Therefore avoid metal parts, needles, paper clips, liquids, wax or similar passing through the ventilation slits of the rear panel into the interior of the set.
Should something get into the interior of the appliance, immediately pull out the mains power plug of the set and inform the customer service department for checking.
Installation
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
­ ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
­ ALWAYS use furniture that can safely support the television set.
­ ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
­ ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
­ ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
­ NEVER place a television set in an unstable location.
­ NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
­ NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
­ NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
If the existing television set is going to be

21

deenutglisschh

Loewe bild i | User Manual Safety/Warning

retained and relocated, the same considerations as above should be applied.

Loewe TV sets are specified for Loewe accessories. We strongly recommend the use of original Loewe setup solutions.

Note the instructions regarding the mounting for the different possible setup solutions! A corresponding documentation is included with every Loewe product.

The usual usage position of the TV set should be followed. The TV set can only be operated horizontally upright A . The inclination can amount to a maximum of 10 degrees for wall mounting B . The TV set must never be operated in portrait orientation, C , horizontal D or overhead on the ceiling E .

±10°

E

A

B

C

D

Position the set so that it is not exposed to direct sunlight and additional heating from radiators!
When using accessories from third-party manufacturers, please ensure that you can adjust the TV set easily to the respective setup solution.
When adjusting the TV set, ensure that the pressure applied to the set frame is not too great. Especially in large format displays, there is the danger of damaging the display.
The mounting of a TV set on a holder according to the VESA standard requires mandatory use of the Loewe VESA adapter bolts. Otherwise, damage to the TV may result.
The Loewe VESA adapter bolts must be attached to the TV set with a torque of approx 4 Nm. You can obtain these from your Loewe dealer (you can find further information in the online user handbook).
Make sure that after unpacking and setting up the TV set the packaging material does not fall carelessly into the hands of children.
Please also note the disposal instructions for packaging and carton (see chapter Environment/Disposal/Licences).

Supervision
Do not let unsupervised children handle the TV set nor let them play in the immediate vicinity of the TV set!
The set could be knocked over, moved

or pulled down from the stand surface and injure people.
Do not leave the TV set unattended when switched on!
Volume
Loud music can lead to hearing damage. Avoid extreme sound volume, especially over extended periods of time and when using headphones!
Thunderstorms
Electrical surges due to lightning strike can damage the set both via the antenna system and via the mains power supply.
During thunderstorms, pull out the mains power plug and all connected antenna cables from the TV set!
If you have connected a network cable to the LAN port, remove this as well!
Even in the case of prolonged absence, the mains power plug and all connected antenna cables should be disconnected from the TV set.
Cleaning and care/chemicals
Disconnect the TV from the mains before cleaning!
Damages caused by chemicals can lead to adverse effects and development of fire.
Never expose the set or accessories to aggressive (e.g. corrosive) chemicals such as alkalis or acids!
Only clean the TV set, the front screen and the remote control with a damp, soft, clean and colour neutral cloth, without any aggressive or scouring cleaning agents!
The loudspeaker panel of your TV set is textile-covered. Hooverthe surface regularly with a soft brush attachment!
For contaminations or stains:
Moisten a soft, colour neutral cloth with detergent solution or commercially available stain remove and rub the stain gently away! You can also treat the stain directly with a commercial dry stain remover spray (hoover up the dust).
Do not moisten the covering fabric directly with detergent solution or stain remover (risk of stain circle formation)! Do not use solvents to clean the fabric!
Note the usage instructions of the manufacturer when using stain remover!
When cleaning loudspeaker panels which have been exposed to nicotine, there is an increased risk of stain circle formation.

22

deenutglisschh

Loewe bild i | User Manual Remote control button mapping
Remote control button mapping
Depending on the application (TV / video / audio / photo / apps) and function (for example, dr+, EPG, Teletext, HbbTV etc.), the key assignment can deviate from the assignment described here.

1

1 Microphone

2

16

2 Sound mute / on.

3

17

3 Call the TV mode.

4

4 Press and hold to speak to voice assistant.

5 EPG (Electronic Programme Guide) on / off.

6 Pressing briefly: Play / Pause media or Start / Pause / Continue the timeshift television.

Pressing longer: Display illuminated media control keys.

18

7 Call Sources menu.

8 Exit displayed menu / application.

5

9 Increase volume. 19

10 When not illuminated: Call channel list.

6

When illuminated: Play / Pause media or Start / Pause / Continue the timeshift television.

7

20

In the menu: OK button (confirm selection).

11 When not illuminated: Move left in menu or Start / Pause / Continue the timeshift television.

8

21

When illuminated: Skip backwards

22

12 When not illuminated: Move down in menu or open the Search menu.

9

23

When illuminated: Stop / End timeshift (return to live image).

10

24

13 Decrease volume.

11

25

14 Colour buttons ­ Execute corresponding function at that time.

12

15 Access the media and video on demand.

13

26

16 Switches the TV set on or switches to standby mode.

Press briefly while TV set is switched on: TV set and all CEC-enabled devices connected to the

14

HDMI ports will be switched off to standby (System Standby).

17 Device key. This button allows you to control other devices with the Loewe remote control.

15

18 Select channels with numeric buttons directly.

19 Teletext / MediaText on / off.

20 Pressing briefly: Call System settings. Pressing longer: Pairs the remote control with the TV via Bluetooth.

21 Call up the Home menu.

22 Step / level back in the menu. While watching TV, switch to the previously watched channel.

23 Next channel.

24 When not illuminated: Move up in the menu. While watching TV, press to call the detailed information on the broadcast. When illuminated: Opens Record menu.

25 When not illuminated: Move right in the menu or Pause the timeshift playback and open timeshift controls. When illuminated: Skip forwards

26 Previous channel.

Note: The key assignment may differ depending on the software or device version. 23

deenutglisschh

Loewe bild i | User Manual Position and function of the connections
Position and function of the connections

1

15

12

2

13 3

14 4

5 6 7 8

9 10 11

1 ANT SAT – Satellite antenna DVB-S/S2 HD F socket ­ 75 Ohm / 13/18 V / 500mA
2 ANT TV – Terrestrial/cable analogue / DVB-T/T2/C HD IEC socket ­ 75 Ohm / 5 V / 80mA
3 HDMI 3 – HDMI input 3 HDMI ­ Digital Video IN/Audio IN
4 HDMI 2 – HDMI input 2 (with enhanced Audio Return Channel) HDMI ­ Digital Video IN/Audio IN/OUT
5 COMMON INTERFACE -CI slot (standard V1.4)
6 HDMI 1 – HDMI input 1 HDMI ­ Digital Video IN/Audio IN
7 SERVICE

8 AUDIO OUT/TOSLINK – Audio output (analogue/digital) (1 Jack 3,5 mm (analogue) L/R Mini TOSLINK (digital)
9 LAN – Network connection RJ-45 ­ Ethernet / Fast Ethernet
10 2x USB 2.0 – USB connection USB type A ­ USB 2.0 (max. 500mA)
11 klang bar i
12 HDMI 4 – HDMI input 4 HDMI ­ Digital Video IN/Audio IN
13 USB 3.0 – USB connection USB type A ­ USB 3.0 (max. 1000mA)
14 USB 3.0 – USB connection USB type A ­ USB 3.0 (max. 1000mA)
15 AC IN – Mains connection Mains socket – 220-240 V – 50 / 60 Hz

1. The analogue or digital output signal at the AUDIO OUT connector cannot be used simultaneously.
   24

deenutglisschh

Loewe bild i | User Manual Preparing the remote control unit | Inserting or replacing batteries | Connecting the TV set | Connecting the soundbar klang bar i | Connecting antennas | Connecting an external device via HDMI cable |

Preparing the remote control
Removing the battery protection The remote control is supplied with batteries. To make them ready for use, remove the plastic flag as shown below.
Inserting or replacing batteries
Press and slide open the battery compartment cover on the top of the remote control. Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese type. Do not use different types of batteries and do not mix old and new batteries together. Make sure that the batteries do not get into the hands of children. The batteries used must not be exposed to excessive heat such as sunlight, fire or similar! Note: The position of the batteries is indicated in the battery compartment (in opposite directions). Pay attention to the correct polarity of + and ­ when inserting the batteries. Do not be guided by the battery contacts (springs), but by the illustration at the bottom of the battery compartment.

Connecting the TV set
Before making any connections to an external devices, make sure both TV set and device are disconnected from power. Most TV connectors are hidden under the back cover. To access these connectors, you must remove the back cover by pulling the top and bottom parts away as shown in the illustration. Both parts are held in place only by magnets, so there is no need to use any tools or remove screws.
When connecting external devices to these internal connectors, first connect the cable to the connector on the TV set. Then route the cable out of the TV using the built-in cable management system, and then route the cable through the neck of the stand (in case you use provided Table stand solution).

Connecting antennas

Terrestrial / cable analogue / DVB-T/T2/C HD antenna:
Plug the cable of antenna, cable TV system or room antenna into the ANT TV socket.
If you want to use analogue cables/DVB-C connection and a DVB-T antenna together, use an external antenna switch (available from your dealer).

Satellite antenna DVB-S/S2 HD:
Connect a connecting cable from the from the LNB to the ANT SAT socket of the TV set.

Cable analogue / DVB-C

DVB-T

R TV

DVB-S

ANT ANT TV SAT

Connecting an external device via HDMI cable
The HDMI connections (High Definition Multimedia Interface) allow the transmission of digital video and audio signals from a player (e.g. DVD player, Blu-ray player, camcorder, set-top box) via a single cable.
TV set

Dispose of used batteries in an environmentally friendly way (see chapter Environment/Legal information).
Push the cover back on after having inserted the batteries.

When you have finished connecting external devices to the TV, replace the back cover.
Connecting the soundbar klang bar i
Klang bar i soundbar is provided in a separate carton box, where you will also find detailed assembly instructions. Follow these instructions to install the soundbar on the TV.

Blu-ray player HDMI

HDMI1

Connect the device by an HDMI cable with a Type A connector (not supplied) to one of the HDMI sockets of the TV set. To fully enjoy the capabilities of your TV, use a cable labelled ,,Premium High-Speed HDMI Cable” or better.

25

deenutglisschh

Loewe bild i | User Manual Connecting to an audio system via HDMI eARC | Connecting to an audio system via analogue audio cable Connecting to the mains supply | Getting started – first steps

Connecting to an audio system via HDMI eARC
TV set
Audio System
HDMI ARC/eARC
HDMI2
Use an HDMI cable (not supplied) to connect HDMI eARC socket of the TV set to the HDMI ARC/eARC socket of an audio system or soundbar. It is recommended to use a cable marked as ,,Ultra High-Speed HDMI Cable” with a Type A connector. Ultra High Speed HDMI Cables are designed to support the new eARC feature in addition to the highest resolution video modes. The Standard HDMI Cable with Ethernet and the High Speed HDMI Cable with Ethernet will also support eARC.

Connecting to an audio system via analogue audio cable
TV set

Analogue amplifier

AUDIO IN

L

R

AUDIO OUT/ TOSLINK
Use a stereo cinch/jack adaptor cable to connect the audio output AUDIO OUT to the analogue audio input of the audio system.
Connecting to the mains supply
Connect the TV set to a 220-240V mains socket.
Plug the mains supply cable into the mains supply connector (AC IN) of the TV and guide the cable out of the TV as shown on the picture below.

Getting started – first steps

Before starting the TV for the first time, make sure that you have completed the connection of your external devices and that the TV is connected to the power supply.

1. Press the

(Standby) button on the

remote control to turn on the TV.

2. You will be welcomed by the Installation wizard which will help you to set up the TV set in a few simple steps.

To navigate in the Installation wizard:

· Use the arrow buttons to select the desired item.

· Press the OK button to confirm the selected item.

· Press the one step.

button to go back

STEP 1 ­ Select the language

Connecting to an audio system via optical audio cable
For this type of connection, you will need to use a digital optical cable (not supplied) with a Mini TOSLINK connector on one end and a standard TOSLINK connector on the other end. Alternatively, you can use standard TOSLINK cable with a Mini TOSLINK adapter.
Before making this connection, ensure you removed plastic protection caps from the cable connectors.
TV set
Audio System
OPTICAL

Connect the mains supply plug of the mains supply cable to a power outlet.

STEP 2 ­ Connecting to the internet
Optional step. If you wish to skip this step, press the right arrow button.
If you have connected the TV to your home network with an Ethernet cable and your network configuration allows DHCP, you will be automatically connected to the Internet.
Alternatively, you can use Wi-Fi connection. You must first select your network from a list of available networks. You will then be prompted to enter your Wi-Fi password. You can do this by typing on the on-screen keyboard.

AUDIO OUT/ TOSLINK
Connect the audio output of the TV labelled AUDIO OUT TOSLINK to the digital audio input of an audio system.

26

deenutglisschh

Loewe bild i | User Manual Getting started – first steps | Home menu

STEP 3 ­ Select the country Select the country in which TV set will be used. This will enable the TV to install optimal functions for the country selected.
STEP 4 ­ Terms & Conditions Carefully read all the information provided about the terms and conditions! If you choose to clear some or all of the check boxes, some or all of the smart features will be turned off. You can change these settings later in the [Support] menu. Continue to the next step by selecting [OK].
STEP 5 ­ Sign in to VIDAA account Optional step. If you wish to skip this step, press the right arrow button. Sign in to your existing VIDAA account or create a new one. A VIDAA account gives you all the best features of your smart TV and always keeps it up to date.
STEP 6 ­ Input source selection Select one of possible inputs as default source.

Select one of the options from which you wish to tune channels: [Satellite], [Antenna], [Cable] Set the desired tuning options and start tuning.
Home menu
1
2

3

4

The Home menu is the central overview page of your TV set. From this menu, you can search for content, manage input sources, or enter system settings.

You can enter home menu by pressing (Home) button.

1. Top menu (Search, Inputs, System Settings, Profile)

Search ­ allows you to search for applications by keywords.

Sources ­ Select or rename the input source. You can access locally connected devices (such as AV, HDMI, USB).

System settings ­ opens the TV configuration menu e.g., with settings for picture, sound, Network.

Profile information ­ allows you to log in to your VIDAA account.

· The time is displayed at the top right of the screen.

· If your TV is connected to the internet, the

corresponding icon representing the type

of network connection

will

be displayed next to the time information.

2. List of recommendations
This row contains a list of recommendations for the application that is currently selected. This list of recommendations only appears for some applications.

3. List of apps
This row contains a list of favourite apps. The library of all installed apps is available by accessing ‘My Apps’ tile in same row.
Add applications to the Home menu:
· Enter apps library by accessing ‘My Apps’ tile.
· In the library, select the app you want to add to home menu.
· Press (Settings) button, select option [Sort] and confirm with OK.
· You can now move the app tile in the list by using the arrows on the remote control.
· Move the app tile to a new position in the top row of apps and confirm the new position by pressing OK.
4. Additional rows
Additional rows are dedicated to recommendations from your installed apps.

If you selected TV as your default source, you will have option to tune in channels.
27

deenutglisschh

Loewe bild i | User Manual Electronic Programme Guide ­ EPG

Electronic Programme Guide ­ EPG
EPG stands for Electronic Programme Guide and provides you with on-screen programme details. With the system, as with a printed programme guide, you can learn about the current programme. In addition programmes can be memorised and also recordings can be programmed. To open/close EPG, press the (EPG) button.
Note: · EPG is only available for DVB stations. · The first time you start EPG, a wizard will
start that guides you through the necessary presettings. · Depending on the number of stations selected for EPG, it may take some time until the programme information is displayed.
EPG Operation In the left column there is a list of stations of the selected source/station list (e.g. DVB-C, personal list).
/ : Scrolling in the station list page by page. Up/Down arrows: Scrolling in the station list. Left/Right arrows: Scrolling through the programmes. In the station list the currently running programs are highlighted by lighter fields. A white vertical line indicates the current time in the running programs. OK: Detailed information on the selected programme will be called. Red Button: Opens schedule screen. Green button: Displays a menu where you can assign colours to specific broadcast content (for example, News, Movies, Sport). Use the arrows and the OK button to assign the desired content type to a specific colour. Exit this menu by pressing the green button. Programmes that belong to the categories you selected are now highlighted in colour in the program guide. Yellow button: View the previous day’s list of programmes. Blue button: View the next day’s list of programmes.

Programme preview
Use arrows to mark desired station in the station list.
Press OK briefly to confirm selection.
In the top left window, the current programme of the selected station is displayed now.
Recording a programme via EPG
You can programme timer recordings of TV programmes conveniently using the EPG.
Press OK button to open Detailed info of selected programme.
Select option [DR+] and press OK button.
Check the timer data and update it if necessary (e.g. directory, start, end, recording type).
In the EPG a recording symbol is placed behind the title of the programme.
Memorising a programme via the EPG
A programme that has not started yet can be memorised. For memorised programmes, the TV set will ask at the beginning of a programme if it should change the channel accordingly or switch on from the stand-by mode.
Mark the desired programme with arrows.
Press OK button to open Detailed info of selected programme.
Select option [Reminder] and press OK button.
In the EPG, a memorise symbol is placed behind the title of the programme.
Programming remote control to Set Top Box (STB)
You have the possibility to program your remote control for use with certain Set Top Boxes. All you need to do is enter a three-digit numerical code. You can find a list of all available devices and their codes in the online user guide. Proceed as follows: · First, activate the device mode by pressing
the (Device) button for three seconds.
· Then press and hold the (Device) button and the button to enter Set Top Box or Learn mode. The LED will flash twice to confirm execution.
· Within the STB mode, then perform the following steps:
1. To program, press and hold the (Device) button and OK button for five seconds.
2. The audio LED flashes twice. 3. Now enter the code. 4. The audio LED flashes once to confirm. 5. Press the (On/Off) button to test. 6. If the Set Top Box responds, pressing the OK
button will complete the process and the LED will flash twice for confirmation. Otherwise, proceed again from step 3.

If an incorrect code is entered, the LED will light for two seconds to indicate the error. The current mode remains active. If you do not press any button for ten seconds after entering the code, the process will end automatically. The audio LED lights up for two seconds afterwards to indicate the termination.
Automatic search
You can also search for the desired device from the list. To do this, proceed as follows:
1. Press and hold the (Device) button and OK button for 5 seconds.
2. The LED will light up twice for confirmation. 3. Navigate up or down with the control pad to
select a device from the list. 4. When selected, the LED will light up for one
second. 5. Press the (On/Off) button to test. 6. If the STB responds, pressing the OK button
will exit this mode and the LED will flash twice to indicate success. Again, 10 seconds after there is no input, the process will end. The LED will illuminate for two seconds to indicate termination.
Teaching the remote control
All buttons except the device button can be taughtin for the operation of devices that are not included in the integrated database. The functions of the selected button are then completely or partially overwritten with the new codes. To do this, the Loewe remote control must be positioned with the remote control to be replaced so that the infrared windows are in line of sight with each other at a distance of 1-5cm.
The learning process is started in STB/learn mode. · First activate the device mode by pressing the
(Device) button for three seconds.
· Then press and hold the (Device) button and the button to enter the Set Top Box or learning mode. The LED will flash twice to confirm execution.
· Within the STB mode, then perform the following steps:
1. Press and hold the (Device) button and the red colour button for five seconds.
2. The LED lights up twice for confirmation and remains lit when the learning function is activated.
3. Press the button on the Loewe remote control that is to be learned. The LED flashes once.
4. Now press the desired button on the original remote control.
5. The LED flashes twice for confirmation and then remains lit. If a learning error occurs, the LED flashes ten times but then remains illuminated.

28

deenutglisschh

Loewe bild i | User Manual Comfort functions

6. If necessary, repeat the procedure or learn more buttons according to step 3.
7. Finally, press the (Device) button or wait longer than ten seconds without pressing a button.
Pairing the remote control / Bluetooth
You can pair the remote with your TV via Bluetooth. In Bluetooth mode, you don’t have to point the remote directly at the TV like with standard infrared remotes. For maximum comfort when controlling the TV, we recommend pairing via Bluetooth.
To pair the remote with your TV via Bluetooth, press and hold the menu key for at least three seconds. Watch the display on the screen to see if the pairing was successful.
To cancel the pairing, enter the menu and then select: [Settings] -> [Network] -> [Bluetooth] -> [Equipment Management]. There, select Smart TV Remote and then the option [Unpair].

Meaning of the LED colours

Under the screen is a small LED that gives you basic information about the status of the TV.

LED colour White Green Blue Blue
Red

TV status Standby mode.
Switched on.
TV is on with screen off.
Automatic calibration of the OLED panel during standby mode.
Recording active.

VIDAA account
A VIDAA account gives you all the best features of your smart TV and always keeps it up to date.
Creating a new account
If you don’t have a VIDAA account, create a new one to enjoy best features of your smart TV.
Before creating a new account, make sure your TV is connected to the network.
1. Press the (home) button on the remote control and select (VIDAA Account) icon in the top navigation bar on the Home screen.
2. Select [Create Account] on screen.

3. Enter your first name, last name, email address and password. Names are optional.
4. Select [Create Account].
Signing into an account
Before signing into your VIDAA account, make sure your TV is connected to the network.
1. Press the (home) button on the remote control and select (VIDAA Account) icon in the top navigation bar on the Home screen.
2. Register your device to your VIDAA Account. After entering your email and password, select [Sign In].
Voice control with Alexa
This TV has Amazon Alexa built-in, allowing you to use your voice to control your TV. Interact with Alexa by pressing and holding (microphone) button and speaking into the microphone on your remote control.
To use the Alexa, TV must be connected to the network and remote control must be paired with the TV via Bluetooth. To fully integrate Alexa with your TV, you must be signed into your VIDAA account. It is possible to use Alexa on the TV without a VIDAA account, but with limited functionality.
Setting up Alexa
1. Press (home) button, then select (Settings) icon, and select [System] -> [Voice Service] -> [Amazon Alexa].
2. Select [Set voice assistant to Alexa] and [Set up now]. If you selected Alexa in the guide when you first turn on the TV, it will take you directly to the [Set up now] step.
3. You are now at the “Sign in to Amazon account” screen. Scan the QR code with your phone or visit the website on your phone or computer and enter the on-screen code. The code will expire after 10 minutes. If you don’t have an Amazon account, create a new one.
4. Once your Amazon account is connected, the TV screen will change to the next step. You can log in to your VIDAA account. If you have signed in before, this step will be skipped.
5. Give your TV a name from the list or customise it.
6. Select [Authorise] and follow on-screen steps in Alexa Skill Setup. Now, Alexa is set up and ready. You can enjoy interacting with Alexa using your voice by just pressing and holding the (microphone) button on your remote control. Ask Alexa after the tone.

Notes:
· Alexa is not available in some countries.
· You can use Alexa without signing in to your Amazon account by selecting [Do it later].
· You can also skip VIDAA account sign in step, by leaving the screen. In this case, you can still use your voice to search on the internet or change the volume on your TV. To use additional Alexa commands, sign in to your Amazon and VIDAA accounts at any time in Settings.
· Download and install the remote control app on your mobile device at (home) -> [Settings] -> [Support] -> [Mobile App Download]. Press the microphone icon in the app to interact with Alexa on your TV.
· You can select the language used by Alexa at (home) -> [Settings] -> [System] -> [Voice Service] -> [Amazon Alexa] > [Alexa Language].
Editing the Channel list
From the main menu, go to [Settings] -> [Channel] -> [Channel Edit] and select the channel list or favourites list you want to edit.
Select the channel or multiple channels you want to move or delete with OK. A check mark appears next to the selected channels.
To move selected channels to a new position: Press the left arrow button on the remote control and use the up/down arrows to move the selected channel(s) to a new position.
To delete selected channels: Press the right arrow button on the remote control and confirm deletion.
To restore deleted channels: Press the red button on the remote control. Press the OK button to select the channels you want to restore, then press the left arrow to return them to the channel list.
Filter: Press the yellow button on the remote control to display the filter, where you can select the type of channel to display in the channel list.
Search: Press the blue button on the remote to search for a specific channel by entering its name in the search box.

29

deenutglisschh

Loewe bild i | User Manual Recording

Recording
Digital recorder (dr+)
You can record programmes you want to watch later using a Digital Recorder. Recording can be started/stopped manually, which can be conveniently done via the programme guide (EPG). If additional languages are being transmitted for a DVB broadcast, these will also be recorded. DVB subtitles can also be recorded. While recording a TV programme, you can watch previous recordings, switch to another input source or launch any application. However, if you decide to switch to another channel on the tuner from which you are recording, the recording will have to be interrupted. Note: Only digital channels can be recorded.
Recording via Programme information To start recording the programme you are currently watching, press (up) and press OK to open the detailed information about the programme you are currently watching. Press the OK button again and the [Schedule Recording] menu is displayed. Recording via Programme Guide
Open the Programme Guide by pressing the (EPG) button. In the guide, select the programme you want to record. Please note that pressing the blue button will bring up the next day’s guide and the yellow button will take you back to the previous day’s guide. After selecting the programme to be recorded, press OK to open the detailed information. Select [Recording] and press the OK button to display the [Schedule Recording] menu.
[Schedule Recording] menu
In this menu you can set the recording details.
[Recording mode] ­ Select the type of recording. [Manual Stop] ­ Recording starts immediately after the recording setup is complete. The end of recording is not defined in this option. Recording will only be terminated by manual user intervention or when the hard drive space is exhausted. [Time] ­ Recording will start and end at the time defined by the user. [Start Time] ­ Set the time when the recording will start.

[End time] ­ Set the time when the recording will end.
[Programme] ­ Record the specified programme. Recording will start and stop based on the timing information obtained from the electronic programme guide.
[Repeat] ­ Option to decide whether the recording should be a one-time or periodic. Only available for [Time] and [Programme] recording modes.
[Once] ­ One-time recording.
[Daily] ­ Repeated recording of the programme or during the selected time each day.
[Mon to Fri] ­ Repeated recording of the programme or during the selected time on weekdays.
[Sat to Sun] ­ Repeated recording of the programme or during the selected time on the weekend.
[Weekly] ­ Here you have the option to specify the days of the week on which to repeat the recording on a weekly basis.
When you have completed the settings for recording, select [Save] to save the settings.
Recording control panel
During recording, you can call up the recording control panel by pressing the (left) or (right) button. You can tell that the TV is recording by the red LED light on the bottom of the TV.
You can use the arrow keys and the OK button to select and confirm the options in the control panel.
Press the button to hide the control panel. Please note that hiding the panel does not stop the recording.
– Rewind the recording. Press this button multiple times to change the rewind speed. You can rewind the recording at any time and watch it while recording is in progress.
– Pause the currently viewed content. Recording continues in the background.
– Resume playback of the recording.
– Fast-forward the recording. Press this button multiple times to change the playback speed.
– Press this button at any time to stop recording. The option to save the recording or delete it will be displayed.

DR+ archive
[DR+ archive] is a place where you can access all your recordings. From here you can play them, delete them and edit any scheduled recordings. If you have recordings on an external storage drive, make sure it is connected to the TV.
List of recordings
While watching broadcast TV, press the (menu) button to open the menu and select [DR+ archive].
Start playback of any of the available records by selecting it and pressing the OK button. At the top of the screen there is a filtering option (default setting is “All”). You can select this filter by moving the cursor up until the filter is highlighted. Press the OK button to change the filter setting. You can choose to display only recordings with a certain type of content, e.g., News, Sports, etc.
To the right of the filter is the [Edit] item. By selecting this item and pressing the OK button, you can mark recordings for deletion. Select the recordings you want to delete with the OK button – the marked items will be displayed with a check mark on the right side. Press the button (right) to delete the selected recordings.
Scheduled recordings menu
While watching broadcast TV, press the (menu) button to open the menu and select [DR+ archive]. Press the (right) button to display [Scheduled] menu.
Here you can view a list of all upcoming recordings. By selecting an upcoming recording and pressing the OK button, you can edit the recording options.
By selecting [Edit] and pressing OK, you can mark scheduled recordings for deletion. Press the OK button to select the scheduled recordings you want to delete – the selected entries will be displayed with a check mark on the right side. Press the button (right) to delete the selected scheduled recordings.

30

deenutglisschh

Loewe bild i | User Manual Technical data
Loewe bild i dr+
Screen diagonal (in cm/inch): 195/77 , 164/65 , 139/55 , 121/48 Resolution (in pixels): Ultra HD (3840 x 2160) EU energy efficiency class SDR / HDR: E/C , E/E , F/E , F/F
TV
Loewe bild i dr+ set Scope of delivery includes a.o. bild i dr+, klang bar i and table stand i bild i.65 dr+ set: W 146,0 / H 88,3 / PD 6,4 / TD 29,0 bild i.55 dr+ set: W 123,6 / H 75,9 / PD 6,4 / TD 29,0 bild i.48 dr+ set: W* 107,7 / H 66,9 / PD 6,4 / TD 29,0 manually rotatable (+ / – 20°), concealed cable routing

Power consumption in on mode max. in watts: 500 / 425 / 325 / 235 Power consumption in Standby Mode / Network standby mode: 0,3 / 0,8 Energy consumption SDR kWh/1000h: 97 , 81 , 68 , 61

Model

Basalt grey

65 dr+ set 55 dr+ set

48 dr+ set

77 dr+

65 dr+

55 dr+

48 dr+

Basalt grey

floor2ceiling stand floor stand flex

Black

wall mount slim 432 wall mount universal

Loewe bild i dr+ Scope of delivery includes a.o. bild i dr+, invisible sound and table stand i bild i.65 dr+: W 146,0 / H 88,3 / PD 6,4 / TD 29,0 bild i.55 dr+: W 123,6 / H 75,9 / PD 6,4 / TD 29,0 bild i.48 dr+: W* 107,7 / H 66,9 / TD 6,4 / TD 29,0 manually rotatable (+ / – 20°), concealed cable routing

Loewe bild i dr+ Scope of delivery includes a.o. bild i dr+ and wall mount universal bild i.77 dr+: W* 173,1 / H 102,3 / PD 8,4 / TD 12,2 tiltable mounting, concealed cable routing

Soundbar
Loewe klang bar i Passive soundbar for installation at Loewe bild i

Basalt grey

Model klang bar i

Article no. 59212D00

EAN Code 4011880170154

Dimensions in cm: W = width, H = height, PD = product depth, TD = total depth. Technical modifications and errors excepted. * In the area of the side-mounted Loewe clip, the width of the TV set may increase by up to 1 cm, depending on the type of set.

31

deenutglisschh

Loewe bild i | User Manual Technical data
Set-up options
Further set-up options are possible. Your dealer will be happy to advise you.
Set up option ground floor2ceiling stand bild i.65 dr+ set: W x H x PD x TD/FP = 145,7 x 86,8 x 6,4 x 18,0 bild i.55 dr+ set: W x H x PD x TD/FP = 123,6 x 74,4 x 6,4 x 17,5 bild i.48 dr+ set: W x H x PD x TD/FP = 107,7 x 65,4 x 6,4 x 17,1 bild i.77 dr+: W x H x PD x TD/FP = 173,1 x 102,3 x 8,4 x 18,6 bild i.65 dr+: W x H x PD x TD/FP = 145,7 x 85,8 x 6,4 x 18,0 bild i.55 dr+: W x H x PD x TD/FP = 123,6 x 73,4 x 6,4 x 17,5 bild i.48 dr+: W x H x PD x TD/FP = 107,7 x 64,4 x 6,4 x 17,1 manually rotatable (+/­ 110°), concealed cable routing, height adjustable (220-290 cm) floor stand flex bild i.65 dr+ set: W x H x PD x TD/FP = 145,7 x 128,9 x 6,4 x 54,0 bild i.55 dr+ set: W x H x PD x TD/FP = 123,6 x 116,5 x 6,4 x 54,0 bild i.48 dr+ set: W x H x PD x TD/FP = 120,8 x 107,5 x 6,4 x 54,0 bild i.77 dr+: W x H x PD x TD/FP | 173,1 x 102,3 x 8,4 x 54,0 bild i.65 dr+: W x H x PD x TD/FP | 145,7 x 128,9 x 6,4 x 54,0 bild i.55 dr+: W x H x PD x TD/FP | 123,6 x 116,5 x 6,4 x 54,0 bild i.48 dr+: W x H x PD x TD/FP | 120,8 x 107,5 x 6,4 x 54,0 manually rotatable (+/­ 45°), concealed cable routing, with or without carrier for accessory tray or soundbar
Set up option wall wall mount slim 432 bild i.65 dr+ set: W x H x PD x TD | 146,0 x 86,8 x 6,4 x 8,4 bild i.55 dr+ set: W x H x PD x TD | 123,6 x 74,4 x 6,4 x 8,4 bild i.48 dr+ set: W x H x PD x TD | 107,7 x 65,4 x 6,4 x 8,5 bild i.77 dr+: W x H x PD x TD | 173,1 x 102,3 x 8,4 x 10,5 bild i.65 dr+: W x H x PD x TD | 146,0 x 85,8 x 6,4 x 8,4 bild i.55 dr+: W x H x PD x TD | 123,6 x 73,4 x 6,4 x 8,4 bild i.48 dr+: W x H x PD x TD | 107,7 x 64,4 x 6,4 x 8,5 flat mounting wall mount universal bild i.65 dr+ set: W x H x PD x TD/FP | 145,7 x 86,8 x 6,4 x 10,1 bild i.55 dr+ set: W x H x PD x TD/FP | 123,6 x 74,4 x 6,4 x 10,1 bild i.48 dr+ set: W x H x PD x TD/FP | 107,7 x 65,4 x 6,4 x 10,2 bild i.77 dr+: W x H x PD x TD/FP | 173,1 x 102,3 x 8,4 x 12,2 bild i.65 dr+: W x H x PD x TD/FP | 145,7 x 85,8 x 6,4 x 10,1 bild i.55 dr+: W x H x PD x TD/FP | 123,6 x 73,4 x 6,4 x 10,1 bild i.48 dr+: W x H x PD x TD/FP | 107,7 x 64,4 x 6,4 x 10,2 tiltable mounting
Dimensions in cm: W = width, H = height, PD = product depth, TD = total depth. Technical modifications and errors excepted. * In the area of the side-mounted Loewe clip, the width of the TV set may increase by up to 1 cm, depending on the type of set.
32

Loewe bild i | User Manual Technical data

deenutglisschh

Technical Information bild i dr+ set (included klang bar i)
Image Resolution (in pixels) Display technology Screen diagonal (in cm/inch) / Response time (in ms) Peak luminance (in cd/m²) / Viewing angle (h/v) Ultra HD scaling / Image+ Active / Adaptive Contrast / 24p HDR (HLG / HDR10 / Dolby VisionTM) / WCG Auto-dimming interior (OPC) / Ambient brightness control
Receiption
DVB-T2/C/S2 HD1 / Multi ATV / Unicable / Dual Channel MPEG / MPEG2 / MPEG4 (H.264) / HEVC (H.265) DVB radio
Audio Output in watts (sine / music) / driver (active + passive) Acoustic speaker concept Magic moment / front firing / down firing Dolby: Audio / Digital / Digital Plus / Atmos / DTS: HD Automatic Volume Control (AVC) / Mimi DefinedTM Individual bass and treble control / Loudness Audio out control: variable / fixed / Subwoofer
Operation Loewe os / Home Screen (incl. favorites) Loewe app / Vivid app / my Loewe app (all: Android + iOS) Voice control by Alexa skills / Vidaa voice Electronic Program Guide (SI-data) / EPG key word search Mediatext (HbbTV) / Teletext / page memory Menu languages / Context related help Parental Lock / Automatic turn-off / Timer Instant Channel Zapping / Quick Start Mode Number of stations in channel list incl. AV and radio PIP (AV)3 / Full PIP / Splitscreen TV:Videotext Software update (via USB / Internet) Hotel Mode (Standard / CEC / IP / RS232)
Multimedia
Loewe dr+: storage capacity in GB / USB recording / timeshift Photo player / Music player / Video player4 Digital Media Renderer (incl. Ultra HD) / Bluetooth music player Internet apps / Internet browser / Internet radio5 YouTube / Amazon prime video / Netflix / Disney+
Connectivity and Interfaces HDMI 2.0b / HDMI 2.16 HDCP 2.2 / HDMI-CEC / ARC / eARC USB / Bluetooth / Screen Mirroring (Miracast) LAN network connection / WLAN (Wi-Fi) integrated Common Interface / CI Plus (CI+) 1.4 ECP certified7 Digital audio: optical TOSLINK / Mini TOSLINK / ARC / eARC Analogue audio out variable / fix (jack 3.5 mm) Center speaker in (via adapter cable) / Cube connector stereo Kensington anti theft lock
Energy
EPREL registration No. (https://eprel.ec.europa.eu/qr/) Power switch / Mains voltages WoLAN / WoWLAN / Fast Power-On (with increased consumption)
Dimensions Weight (approx.) in kg without setup solution Weight (approx.) in kg incl. standard setup solution W x H x D (approx.) in cm without setup solution ( incl. signature flag) W x H x D (approx.) in cm incl. wall mount slim ( incl. signature flag) W x H x D (approx.) in cm incl. table stand ( incl. signature flag) VESA support
Scope of Delivery Speaker Setup Solution Remote control incl. batteries Manual / power cord
Optional accessories Selection of recommended setup solutions

65

55

Ultra HD (3840 x 2160) OLED (WRGB Pixel) 164/65/1 900/120° i/ h /i/i i/i/i/i i /i
i/i/i/ h i/i/i/i
i
2 x 20 / 2 x 40 / 8 klang bar i h /i/ h i/i/i/ i/i i/ h 7-Band EQ / h h /i/i
os7 /i h /i/i i/ i i/ h i/i/ 792 i2 /i i/i/i h /i 10.000 h / h /i i/i i/ h / h / h
1.000/ h /i i/i/i i/i i/i/i i/i/i/i
4 x HDMI 2.16 i/i/i/i 4 (2 x USB 3.0) /i/i i/i 1 / 1 / 1 h /i/i/i i/i h /i
i

Ultra HD (3840 x 2160) OLED (WRGB Pixel) 139/55/1 900/120° i/i/ h /i i/i/i/i i /i
i/i/i/ h i/i/i/i
i
2 x 20 / 2 x 40 / 8 klang bar i h /i/ h i/i/i/ i/i i/ h 7-Band EQ / h h /i/i
os7 /i h /i/i i/ i i/ h i/i/ 792 i2 /i i/i/i h /i 10.000 h / h /i i/i i/ h / h / h
1.000/ h /i i/i/i i/i i/i/i i/i/i/i
4 x HDMI 2.16 i/i/i/i 4 (2 x USB 3.0) /i/i i/i 1 / 1 / 1 h /i/i/i i/i h /i
i

h h / 220-240V, 50/60 Hz i/i/i

h h / 220-240V, 50/60 Hz i/i/i

31,1 37,1 146,0 x 86,8 x 6,4 146,0 x 86,8 x 8,4 146,0 x 88,3 x 29,0 300 x 200

24,7 30,7 123,6 x 74,4 x 6,4 123,6 x 74,4 x 8,4 123,6 x 75,9 x 29,0 300 x 200

klang bar i (separated) table stand i Loewe remote i/i(2,5 m)

klang bar i (separated) table stand i Loewe remote i/i(2,5 m)

floor2ceiling stand, floor stand flex, wall mount slim 432, wall mount universal

48
Ultra HD (3840 x 2160) OLED (WRGB Pixel) 121 / 48 / 1 720/120° i/i/ h /i i/i/i/i i /i
i/i/i/ h i/i/i/i i
2 x 20 / 2 x 40 / 8 klang bar i h /i/ h i/i/i/ i/i i/ h 7-Band EQ / h h /i/i
os7 /i h /i/i i/ i i/ h i/i/ 792 i2 /i i/i/i h /i 10.000 h / h /i i/i i/ h / h / h
1.000/ h /i i/i/i i/i i/i/i i/i/i/i
4 x HDMI 2.16 i/i/i/i 4 (2 x USB 3.0) /i/i i/i 1 / 1 / 1 h /i/i/i i/i h /i i
h h / 220-240V, 50/60 Hz i/i/i
17,4 23,4 107,7 x 65,4 x 6,4 107,7 x 65,4 x 8,5 107,7 x 66,9 x 29,0 300 x 200
klang bar i (separated) table stand i Loewe remote i/i(2,5 m)

i = included/installed h = not included / possible 1) Reception of DVB-T2 HD is available in selected countries. Reception of digital channels may be limited by individual regulations from the respective broadcaster/provider. UK models are Freeview HD compliant. 2) bs – cs – da – de – et – en – es – fr – hr – is – it – lv – lt – hu – nl – no – pl – pt – ro – sq – sk – sl – sr – fi – sv – el – be – bg – kk – mk – ru – uk – tr – ar 3) AV-PIP is only available in combination with DVB-T/C/S. 4) Via home network and USB. 5) Incl. s

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>