LOEWE Bild 3 OLED TV Instruction Manual

June 6, 2024
LOEWE

LOEWE -logo

Loewe bild 3
TV
bild 3.55 oled
bild 3.49
bild 3.43

LOEWE Bild 3 OLED TV -

Operating manual 2

Introduction

Many thanks for choosing Loewe and placing your trust in us.
By opting for Loewe, you have not only chosen a modern and technically innovative television but also going for timeless design, razor-sharp picture quality, brilliant sound for film and music enjoyment as well as intuitive operation with the Loewe remote control, smartphone or tablet.
In short: Loewe stands for optimal home entertainment. We wish you much pleasure with Premium Home Entertainment from Loewe and we are glad to have you as a customer. With the aim of a safe and long-term fault-free use of the set, before putting the TV set into operation, please read the chapter Safety/ Warning on the next page.

Delivery specification

  • TV set
  • Instruction manual 1
  • Rotation unit
  • Table stand base plate
  • Welcome Box:
  • Remote control assist with two alkaline batteries type AAA
  • Mains cable
  • Operating manual 2 (these instructions)
  • Table stand mounting instructions
  • Velcro cable ties
  • Screws for assembly option
  • Toolset for mounting of the installation option

Documentation

This part of the operating manual contains essential basic information. The device is commissioned and set up by means of the intuitive operation guide after the device has been switched on for the first time. A detailed user handbook describing the functions and features of your new Loewe set can be downloaded in electronic form from the Loewe website.

LOEWE -qr

The user handbook is updated regularly. Please find a detailed user handbook here https://my.loewe.tv/manuals/bild Simply scan the QR code.

Visit our homepage under: www.loewe.tv/int/support
In this section, you will also find the FAQs – frequently asked questions. Official web forum: www.loewe-friends.de

Position of the rating plate

Labels with the model number and operating voltage can be found on the back of the TV set or on the packaging.

Safety/Warning

For your safety, and to avoid unnecessary damage to your unit, please read and follow the safety instructions below.
Key
This symbol indicates risks caused by high voltages.
This symbol indicates dangers caused by the development of fire.
This symbol is to alert the user to other, more specific risks.
This symbol indicates dangers caused by sharp edges.
Do not remove set rear panel
Warning: When opening or removing the rear panel, there is the danger of electric shock and the risk of serious injury from high voltages.

ATTENTION
ELECTRIC SHOCK DANGER–
DO NOT OPEN

Never open the rear panel yourself. Leave repairs and servicing work on your TV set to qualified, authorized television technicians. Please contact your dealer or our customer service.

Intended use and environmental conditions

This TV set is intended exclusively for the reception and
playback of picture and sound signals.
The TV set is designed for dry rooms (living rooms and office
spaces). It must not be used in rooms with a high level of humidity (e.g. bathroom, sauna) or outdoors.

When using the set, make sure that it is protected from moisture (dripping and splashing water or condensation).
High humidity and dust concentrations lead to power leaks in the set. This can lead to the danger of injury and damage to the set by electric tensions or a fire.
If you’ve brought the set from the cold into a warm environment, leave it off for around an hour due to the formation of condensation.
Do not place objects filled with liquid on the set. Protect the set from dripping and splashing water. Candles and other open flames must be kept away from the set at all times to prevent the fire from spreading.

The materials we used in this device comply with all regulatory requirements. However, the migration of substances cannot be ruled out. We, therefore, suggest you avoid permanent contact between food and the TV set.

Transport

Improper handling during transportation can lead to damage to the display and risks of injury.
The screen consists of glass or plastic and can break if handled improperly.
At least two people are required to transport the set. Only transport the set in a vertical position.
No pressure should be applied to the glass or the plastic during transport.
The correct unpacking of the set is shown in the operating manual 1.

Mains cable/power supply

Immediately pull out the mains power plug from the mains socket if you detect something unusual.
Incorrect voltages can damage the set.
This set may only be connected to a mains power supply with the voltage and frequency indicated on the rating plate using the enclosed mains cable.
The main power plug of the TV set must be easily accessible so that the set can be disconnected from the mains at any time.
When pulling the mains power plug out, do not pull the cable but the plug housing. The cables in the mains power plug could be damaged and cause a short circuit when plugged in again.
A mains power cable with damaged insulation can lead to electric shock and presents a fire hazard. Never use a damaged mains cable.
Lay the main cables so that they cannot be damaged. Do not tread on the main cable.
The main cable must not be kinked or laid over sharp edges.
If you use portable multiple sockets to connect the TV set, do not cascade several multiple sockets consecutively.

Air circulation and high temperatures

Like any electronic device, your TV set requires air for cooling. If air circulation is impeded, it may result in a fire.
The ventilation slots on the rear panel of the set must therefore remain free. Please do not cover the set.
Wall mounting: Leave at least 10 cm of space all around the set at the side, above and below.
Table/stand foot: Leave at least 10 cm clear space around the set at the side and at the top.

LOEWE Bild 3 OLED TV -temperatures

Foreign bodies

Foreign bodies inside of the set can lead to short circuits and fires.
The danger of injury and damage exists.
Therefore avoid metal parts, needles, paper clips, liquids, wax, or similar passing through the ventilation slots of the rear panel into the interior of the set.
Should something gets into the interior of the appliance, immediately pull out the main power plug of the set and inform the customer service department for checking?

Installation

Opting for an incorrect or wrongly mounted installation can lead to accidents. Rolling or falling sets can cause injuries or damage.
Loewe TV sets are specified for Loewe accessories. We strongly recommend the use of original Loewe installation options. Do not use any installation options that are not approved for your TV set!
Note the instructions regarding the mounting for the different possible installation options! Corresponding documentation is included with every Loewe product.
Check before the installation of the set, whether the final location with regard to the surface (pressure sensitivity) and stability (static) is designed for the load from the set! This applies in particular to high-gloss lacquered surfaces and surfaces made of real wood, real wood veneer, and plastic surfaces.
Only place the TV  set on a level, stable, horizontal base with a table or stand foot! The set should especially not protrude at the front when installing it in or on
furniture.
Do not place the television set on cloth or other materials that may be located between the television set and supporting furniture. Educate children about
dangers of climbing on furniture to reach the television set or its controls.
The usual usage position of the TV set should be followed. The TV set can only be operated horizontally upright  A. The inclination can amount to a maximum of 10 degrees for wall mounting B. The TV set must never be operated in portrait orientation, C, horizontal D, or overhead on the ceiling E.

LOEWE Bild 3 OLED TV -Installation

Position the set so that it is not exposed to direct sunlight and additional heating from radiators!
Do not place the TV in a location where vibrations can arise! This can lead to damage.
In the case of installation options for third-party manufacturers with a motor drive, it is to be ensured that the adjustment of the TV set does not occur manually. It is generally not advisable to use the installation options of other manufacturers with locking devices in certain positions.
When using accessories from third-party manufacturers, please ensure that you can adjust the TV set easily to the respective installation option.

When adjusting the TV set, ensure that the pressure applied to the set frame is not too great. Especially in large format displays, there is the danger of damaging the display.

The mounting of a TV set on a holder according to the VESA standard requires the mandatory use of the VESA adapter bolts. Otherwise, damage to the TV may result. The Vesa adapter bolts must be attached to the TV set with a torque of circa 4 Nm. You can obtain these from your Loewe dealer (you can find further information found in the online user handbook). Make sure that after unpacking and setting up the TV set the packaging material does not fall carelessly into the hands of
children.
Please also note the disposal instructions for packaging and carton (see chapter Environment/Disposal/Licences ).

Supervision

Do not let unsupervised children handle the TV set nor let them play in the immediate vicinity of the TV set!
The set could be knocked over, moved, or pulled down from the stand surface and injure people.
Do not leave the TV set unattended when switched on!

Volume

Loud music can lead to hearing damage. Avoid extreme sound volume, especially over extended periods of time and when using headphones!

Thunderstorms

During thunderstorms, pull out the mains power plug and all connected antenna cables from the TV set!
If you have connected a network cable to the LAN port, remove this as well!
Electrical surges due to lightning strikes can damage the set both via the antenna system and via the main power supply. Even in the case of prolonged absence, the main power plug and all connected antenna cables should be disconnected from the TV set.

Cleaning and care/chemicals

Before cleaning, switch the TV set off using the mains power switch!
Damages caused by chemicals can lead to adverse effects and the development of fire. Never expose the set or accessories to aggressive (e.g. corrosive) chemicals such as alkalis or acids!
Only clean the TV set, the front screen, and the remote control with a damp, soft, clean, and color-neutral cloth, without any aggressive or scouring cleaning agents!
The loudspeaker panel of your TV set is textile-covered. Hoover the surface regularly with a soft brush attachment!
For contaminations or stains:
Moisten a soft, color-neutral cloth with detergent solution or commercially available stain remove and rub the stain gently away! You can also treat the stain directly with a commercial dry stain remover spray (hoover up the dust). Do not moisten the covering fabric directly with detergent solution or stain remover (risk of stain circle formation)! Do not use solvents to clean the fabric!
Note the usage instructions of the manufacturer when using stain remover!
When cleaning loudspeaker panels that have been exposed to nicotine, there is an increased risk of stain circle formation.

Remote control button mapping

Depending on the selected operating mode (TV/Video/Audio/Photo/Apps) and function (e.g. EPG, PIP, Teletext, HbbTV, etc.), the key assignment may differ from the assignment described here (see the corresponding chapter of the online user handbook).

LOEWE Bild 3 OLED TV -Remote

  1. Sound mute/on.
  2. LED display for the currently operated device.
  3. Call up the TV mode.
  4. Reassign remote control to SetTop-Box<1 (presetting: Apple N).
  5. Pressing briefly. Open the DR+ archive. Pressing longer: Call up timer
  6. Pressing briefly. Add the current object to Home favorites. Pressing longer: Call up App Gallery or Mimi Defined™(1 (4
  7. EPG (Electronic program guide)on/off.
  8. Teletext/Med iaTexto on/off.
  9. Pressing briefly: Call up function list for the active operating mode. Pressing longer: Call up System settings.
  10. V+/V- increase/reduce volume.
  11. Pressing briefly Call up the channel list. Pressing longer: Call up an expanded channel list. In the menu: confirm/call up.
  12. Green colored key: screen on/off in Audio/Radio mode.
  13. Red-colored key: call up preferred value-added network service, if available o.
  14. Pressing briefly: skip backward. Pressing longer: winding backward.
  15. Pressing briefly: direct recording (with the determination of recording duration)(3.
  16. Pressing longer: One Touch Recording <3. (3) Pause/ Start/pause the timeshift television 0.
  17. Stop/ End timeshift (return to live image)°.
  18. Pressing briefly: skip forwards. Pressing longer: winding forwards.
  19. Play / Start/continue timeshift television 0.
  20. Blue colored key: call up channel function list (selection of language/sound. subtitles or channel/video track).
  21. Pressing briefly: Yellow-colored key call-up history. Pressing longer: Yellow-colored key: call up the last channel.
  22. Navigation on the user interface, select objects. In the menu/ lists: select/set.
  23. P+/P— next/previous channel.
  24. Pressing briefly: step /level back. Pressing long: close all displays.
  25. Press briefly during an on-screen display: in the display. Info text appropriate to the content that can assist you further, should you have any questions about your N set. Press briefly. without on-screen display: access status display. With the status display open and repeatedly pressing the key call up the detailed information on the broadcast. Press longer: show Explanation of keys.
  26. PIP (picture in picture) on/off.
  27. Call up the Home view.
  28. Select channels with numeric buttons directly. In the menu: enter numbers or letters
  29. Call up Sources.
  30. Reassign remote control to video device(‘ (presetting: BluTech Vision 3D).
  31. Call up radio mode (standard assignment)”.
  32. Switches the N set on (mains switch must be turned on) or switches to standby mode. Press briefly while the TV set is switched on: N set and all CEC-enabled devices connected to the HDMI ports will be switched off to standby (System Standby).

The assignment of these keys can be changed. The description refers to the standard-setting. The factory setting of the keys can vary depending on the firmware version of the remote control. tz Depending on the settings HbbTV mode is on/off. start behavior of HbbTV station ( System Settings Control more … HbbTV ) Only with externally connected USB hard disk. FileVault assignment for the long key press: Mimi-DefinedI”‘ on/off (if Mimi-Defined”‘ is activated on the TV set). otherwise, call up App Gallery.

Position and function of the connections (bild 3.55 oled)

LOEWE Bild 3 OLED TV -Position

  1. Slot for Kensington lock

  2. Mains switch

  3. AC IN – Mains connection
    Mains socket – 220-240 V ~ 50 / 60 Hz

  4. LAN – Network connection
    RJ-45 – Ethernet / Fast Ethernet

  5.   ANT SAT 1 – Satellite antenna (Sat tuner 1) DVB-S/S2
    F socket – 75 Ohm / 13/18 V / 500mA

  6. ANT SAT 2 – Satellite antenna (Sat tuner 2) DVB-S/S2
    F socket – 75 Ohm / 13/18 V / 500mA

  7. ANT TV – Antenna/cable analogue / DVB-T/T2 / DVB-C
    IEC socket – 75 Ohm / 5 V / 80mA

  8.   HDMI 1 – HDMI input 1(1
    (with Audio Return Channel)
    HDMI – Digital Video IN/Audio IN/OUT

  9. HDMI 2 – HDMI input 2(1
    HDMI – Digital Video IN/Audio IN

  10. USB 3.0 – USB connection
    USB type-A – USB 3.0 (max. 2A(5)

  11. AUDIO OUT/TOSLINK – Audio output (analogue/digital)(3
    Jack 3,5 mm (analog) L/R
    Mini Toslink (digital)

  12. HEADPHONE – Headphone connection
    Jack 3,5 mm – Headphones 32–200 Ohm

  13. RS-232C – Serial interface(2– (RJ12)

  14. AV – Center IN(4
    Micro AV socket

  15. HDMI 3 – HDMI input 3(1
    HDMI – Digital Video IN/Audio IN

  16. COMMON INTERFACE – CI slot 1 (standard V1.4)

  17.  C OMMON INTERFACE – CI slot 2 (standard V1.4)

  18. HDMI 4 – HDMI input 4(1
    HDMI – Digital Video IN/Audio IN

  19. USB 2.0 – USB connection
    USB type-A – USB 2.0 (max. 2A (5)

  20. USB 3.0 – USB connection
    USB type-A – USB 3.0 (max. 2A)

  • Before connecting an external device, please be aware that the individual HDMI ports can work with a range of different signals, see online User handbook, chapter Technical data, section bild ( across sets ) – Signals via HDMI/AV (PC IN).
  • The adaptor is available as an accessory from your dealer.
  • The analog or digital output signal at the AUDIO OUT connector cannot be used simultaneously.
  • Can be used with the Loewe Klang link mc and its enclosed adapter. Loewe Klang link mc will be available at a later point in time.
  • The maximum current of 2A is only accessible if one USB port is used. If both USB ports are in use, the maximum current is divided between them.

Position and function of the connections (bild 3.49 / bild 3.43)

LOEWE Bild 3 OLED TV - bild

  1. Mains switch

  2. AC IN – Mains connection Mains socket – 220-240 V – 50 / 60 Hz

  3. Slot for Kensington lock

  4. LAN – Network connection RJ-45 – Ethernet / Fast Ethernet

  5. ANT SAT 1- Satellite antenna (Sat tuner 1) DVB-S/S2 F socket – 75 Ohm / 13/18 V / 500mA

  6. ANT SAT 2 – Satellite antenna (Sat tuner 2) DVB-S/S2 F socket – 75 Ohm / 13/18 V / 500mA

  7. ANT TV – Antenna/cable analogue / DVB-T/T2 / DVB-C IEC socket – 75 Ohm / 5 V / 80mA

  8. HDMI 1- HDMI input 10 (with Audio Return Channel) HDMI – Digital Video IN/Audio IN/OUT

  9. HDMI 2 – HDMI input 2(1HDMI – Digital Video IN/Audio IN

  10. USB 3.0 – USB connection USB type A – USB 3.0 (max. 2A(5)

  11. AUDIO OUT/TOSLINK – Audio output (analogue/digital)(3 Jack 3.5 mm (analogue) L/R Mini Toslink (digital opt.)

  12. HEADPHONE – Headphone connection Jack 3,5 mm – Headphones 32-200 Ohm

  13. RS-232C – Serial interface12 – (RJ12)

  14. AV – Center IN Micro AV socket

  15. HDMI 3 – HDMI input 3r.
    HDMI – Digital Video IN/Audio IN

  16. COMMON INTERFACE CI slot 1 (standard V1.4)

  17. COMMON INTERFACE CI slot 2 (standard V1.4)

  18. HDMI 4 HDMI input 40
    HDMI – Digital Video IN/Audio IN

  19. USB 2.0 – USB connection
    USB type A – USB 2.0 (max. 2A15)

  20. USB 3.0 – USB connection
    USB type A – USB 3.0 (max. 2A)

  • Before connecting an external device, please be aware that the individual HDMI ports can work with a range of different signals, see online User handbook, chapter Technical data, section bild (across sets) – Signals via HDMI/AV (PC IN).
  • The adaptor is available as an accessory from your dealer.
  • The analog or digital output signal at the AUDIO OUT connector cannot be used simultaneously.
  • Can be used with the Loewe Klang link mc and its enclosed adapter. Loewe Klang link mc will be available at a later point in time.
  • The maximum current of 2A is only accessible if one USB port is used. If both USB ports are in use, the maximum current is divided between them.

Technical data (bild 3.55 oled/bild 3.49/bild 3.43)

Changes in technical data and design of the equipment reserved.

Loewe device type: *bild 3.55 led** bild 3.49 bild 3.43
Part number: 59482xxx 59438xxx 59439xxx
EU energy efficiency class: see enclosed energy label or under

www.loewe.ty/int/support
Screen diagonal:| 139cm/55 inch| 126 cm/49 inch| 108 cm/43 inch
Power consumption On-Mode (max.) (Audio output 1/8of the maximum value):| 302 W| 171 W| 137 W
Power consumption On-Mode (home)«: Annual energy consumption a:| see enclosed energy label or under www.loewe.tv/int/support
Power consumption quick start mode:| 58.0 W| 452 W| 45.0 W
Power consumption network standby mode (WoL/WoWLAN max.):| 106 W| 0.95 W| 0.95 W
Power consumption standby Mode:| 0.34W| 0.25 W| 0.35 W
Power consumption when set is switched off:| 0 W| 0 W| 0 W
Picture format / Resolution:| 16:9 / Ultra HD 3840 x 2160 px
Display technology:| LCD with Edge-LED-Backlight
Device dimensions without stand (W < 4 x H x D):| 122.8x 73.7 x 6.8cm| 111.9 x 67,9 x 8.0cm| 96.3 x 59,2 x 8.0 cm
Device dimensions with stand<2 (W<4 x H x D):| 122.8x 78.8x 27.0cm| 111.9 x 70.4x 25.0cm| 96.3 x61.6 x 25.0cm
Weight without stand (approximate):| 23.0 kg| 20.5 kg| 15.5 kg
Weight with stand<2 (approximate):| 27.6 kg| 23.6 kg| 18.6 kg
Ambient temperature:| 5°C – 35°C
Relative humidity (non-condensing):| 20 – 80%
Air pressure:| 800 -1114 hPa (0 – 2000 m above sea level)
Chassis designation:| SL510| I SL510| I SL510
Power supply| 220 V – 240 V/50-60 Hz
Tuner: terr./cable:

Satellite:

| VHF/Hyperband/UHF

4 levels: 13/18V/22kHz /16 levels: DiSEqC 1.0/ single-cable system: EN 50494

Range: terr./cable:

Satellite:

| Terr./cable: 45 MHz up to 860 MHz
Satellite: 950 MHz up to 2150 MHz
Channel storage locations incl. AV and radio:| 6000
TV standards: analog: digital:| B/G, I, L, D/K, M, N

DVB-T/T2, DVB-C, DVB-S/S2 (UHD via DVB to max. 60 Hz)

Color standards:| SECAM. PAL. NTSC. NTSC-V. PAL-V (60 Hz)
Sound formats: analog (FM):

analog (NICAM): digital (MPEG):

|

Mono. Stereo. Dual-channel Mono. Stereo, Dual channel Mono. Stereo. Dual- channel. PCM. Dolby Digital. Dolby Digital Plus. Dolby Digital Pulse

Audio output power (sine/ music):| 2x20W/ 2x 40W
Acoustic speaker concept:| Speaker Box
Teletext:| TOP/ FLOF / HiTech (Level 2.5)
Page memory:| 2000
LAN: Standards supported:|

10 Mbit/sec Ethernet (10Base-T)/100 MbiVsec Fast Ethernet (100Base-T)/ 1000 M bit/sec Gigabit Ethernet (1000Base-T)

WLAN: Standards supported: Power/Frequency range: Types of encoding that are supported:| IEEE 802.11a/b/g/n, 802.11ac

Maximum power <100 mW at 2400-2483.5 MHz and 5150-5725 MHz WEP 64 and 128 Bit (ASCII and HEX), WPA PSI( WPA2 AES

Bluetooth: Power/Frequency range: Bluetooth protocols| Maximum power <10 mW at 2.4 GHz A2DP SRC. A2DP SNK, HID
Home networking standard:|

Universal Plug and Play Audio/ Video (UPnP AV)

Formats supported<3:  Pictures: Audio: Video: HDR: Container:| JPEG. JPEG progressive (max. resolution 3840×2160). PNG

MP1. MP2, MP3, AAC, AAC_LATM, ALAC, AMR_NR (Adaptive Multi-Rate), OPUS. FLAG, PCM. Ogg Vorbis. AC3 (Dolby Digital). EAC3 (Dolby Digital Plus / Dolby Atmos)

VP6. VP6F. VP8. VP9 profile 0 and 2 up to level 5.1 (UHD@60 Hz) MPEG. MPEG 2. MPEG 4 (excluding DivX 5.0). MSMPEG4v3. H.263. H.264/AVC up to High Profile@ Level 4.2 (Full HD 0 60 Hz). H.265/HEVC up to main 10 profile@ level 5.1 (UHD060 Hz). Real Video (RV30. RV40). FLV1 (Sorenson Spark)

Dolby Vision includes low latency mode (bild 3.55 oled). HDRIO. HCG

AVI. WAV. OGG. FLV. TS/PS. MKV. MPEG/MPG (MPEG to MPEG 4). WEBM. MOV (Quick time). 3GPP. 3G2. 3GP. RM. VOB

  1. The energy consumption per year is calculated on the basis of a daily four-hour operation of the TV set 365 days. The actual energy consumption will depend on the way The TV set is used. On-Mode (home) values less than 100 W must have decimal places (,0).
  2. Supplied mounting option: Table Stand.
  3. For the playability of the individual formats, no guarantee can be given.
  4. The width of the TV set can be increased by up to 8,2mm depending on the type of TV set in the area of the side-mounted Loewe brand label.

Environment

Power consumption

Your TV set is equipped with an eco-standby power supply. In the standby mode, the power consumption drops to low power (see chap­ter Technical data). If you want to save even more energy then switch the device off with the mains switch. Please also note that the EPG data (Electronic Programme Guide) is lost and possibly programmed timer recordings cannot be carried out by the TV set.

The TV set will be completely separated from the mains only when you unplug the mains cable.

The power consumed by the TV set during operation depends on the energy efficiency preset in the initial installation or on the setting in the system settings.

If you activate the automatic dimming, your TV picture will adapt to the ambient brightness. This reduces the power consumption of the TV set.

Automatic shutdown

If the TV is not operated for 4 hours (adjustment of volume, program change, etc.) the TV will automatically switch to standby mode to save energy. A prompt to terminate this shutdown process appears one minute before the 4 hours expire.

By default, the automatic shut-off is active in the energy efficiency mode home Mode/personal mode, premium mode.

Automatic shutdown does not occur when using the radio without a screen display (screen off).

Disposal

You have chosen a very high-value and durable product.

Packaging and cardboard

The disposal of the packaging will be gladly handled for you by your specialist dealer. If you dispose of the packaging yourself, dispose of the packaging in the sorted waste disposal and according to the local disposal regulations. Place cardboard and paper in the waste paper, foils, and polystyrene in the recyclable waste collection.

The set

Your Loewe product is made with quality materials and components that are recyclable and reusable.
This symbol means that electrical and electronic equipment incl. cables must be disposed of separately from household waste at the end of their service life.
You can return your old set for free at designated recycling centers, or at your dealer if you buy a similar new device. Additional details about returns (even for non-EU countries) are also available from your local government. They make an important con­tribution to the protection of our environment.

The batteries

The original equipment batteries do not contain harm­ful substances such as cadmium, lead, or mercury.
Used batteries should not be disposed of in household waste. Dispose of used batteries free of charge in the collection containers set up at the dealer or at the public collection points.

Licences

LOEWE Bild 3 OLED TV -Licences

Dolby Audio, DolbyVision, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Confidential unpublished works.

Copyright © 2003-2015 Dolby Laboratories. All rights reserved

This set contains software that is partly based on the work of the Independent JPEG Group.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)..)

This software is provided by the OpenSSL project “as is” and any expressed or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the OpenSSL projector its contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services: loss of use, data, or profits: or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.

This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).

This product includes software written by Tim Hudson (tjh@cryptsoft.com).

This product contains software that was developed by third parties and /or software that is subject to GNU General Public License (GPL) and/or GNU Lesser General Public License (LGPL). You can pass on and modify them in accordance with Version 2 of the GNU General Public License or optionally every later version which is published by the Free Software Foundation.

The publication of this program by Loewe is carried out WITHOUT ANY GUARANTEE OR SUPPORT, particularly without an implicit guarantee concerning MARKET MATURITY or the USABILITY FOR A SPECIFIC PURPOSE. Details can be found in the GNU General Public License. You can obtain the software via the Loewe customer service department.

The GNU General Public License can be downloaded from: http://www.gnu.org/licenses/.

Technical information

Notes on the LCD / OLED screen

The TV set with the LCD screen or OLED screen purchased by you meets the highest quality standards and has been checked for pixel errors.

Despite of thorough care when manufacturing the display, it cannot be 100% guaranteed that no subpixel defects will occur due to tech­nical reasons.

Please understand that these types of effects, as long as they are within the limits specified in the standard (ISO 9241-307, fault class II), cannot be considered as a device defect in terms of the guarantee.

For TV sets with LCD”: Avoid displaying static images over a longer period. Image persistence errors may arise.

For TV sets with OLED(2: Organic Light-Emitting Diodes are an imaging technology based on self-luminous pixels that offer clear benefits in terms of image quality and performance.

Under certain conditions, persistent, one-sided loads on the OLED material can result in persistent image faults that are irreversible. Residual image issues can arise by using static image content over a longer period, such as static images, subtitles or ticker displays, loop­ing dia-shows or video sequences, static displays serving as presenta­tion monitors, or with video games, black bars in some screen formats.

These residual image issues are not defects within the meaning of the warranty.

To minimize such issues, Loewe has developed a special algorithm for detecting image content.

If static images are displayed for too long, the TV set automatically switches to a screen-friendly contrast mode. After a new user oper­ation, the device immediately returns to its normal state. In addition, menu insertions are gradually reduced or displayed transparently after one minute.

Under normal viewing conditions, such residual image issues do not arise.

Information about connected USB hard drives

Switching off the TV set with the mains switch during operation or an inadvertent disruption to the power supply (e.g. power failure) can cause damage to the hard disk file system and hence loss of the recorded broadcasts.

Never disconnect the USB storage device from the TV set during a copy process. Before switching off the set with the mains switch, we recommend you to switch it to standby mode.

If contrary to expectation, you are still experiencing problems with the operation of the hard drive, you can first carry out a test. In addition, the formatting of the hard disk can be remedied. In the process, however, all content on the hard disk is deleted. You can find the corresponding menu items under System settings -} Control → more … → Hard disks.

Loewe is not liable for any loss of data on the connected hard drive. To prevent data loss, we recommend you save important recordings onto a further additional external storage device.

Possible installation options

You can use the following Loewe installation options listed for your TV set.
Do not use any installation options that are not approved for your TV set.

TV set Item number/name of the installation option:
bild 3.55 oled 72670×00

73190×00
72115×80
71363×00
71391×20| FS Plate 55_65
floor stand 43-65
WM 67
WM Isoflex 32-55
WM Slim / Vesa Size 300
Bild 3.49| 72660×00
73190×00
72115×80
71363×00
71389×00| FS Plate 32_49
floor stand 43-65
WM 67
WM Isoflex 32-55
WM Slim / Vesa Size 200
Bild 3.43| 72660×00
73190×00
72435×00
72115×80
71363×00
71389×00| FS Plate 32_49
floor stand 43-65
FS 32_43 (formerly FS Connect 32-40)
WM 67
WM Isoflex 32-55
WM Slim / Vesa Size 200

Conformity / Manufacturer’s declaration

Loewe Technology hereby declares that this product meets the essential requirements and other relevant provisions of Directive 2014/53/EU and all
applicable EU directives.

In the frequency range 5150 to 5350 MHz, this TV set is restricted to indoor use in the following countries: Belgium, Bulgaria, Denmark, Germany, Estonia, Finland, France, Greece, Ireland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, United Kingdom, Cyprus.

You can find the complete declaration of conformity in the product selection at:

www.loewe.tv/int/support

Imprint

Loewe Technology GmbH
Industriestraße 11
D-96317 Kronach
www.loewe.tv

Printed in Germany
Editorial date 03/2020-3.0 SB ©
Loewe Technology GmbH, Kronach

The information in this document is subject to change without notice and does not constitute any obligation on the part of Loewe Technology GmbH.

All rights including translation, technical modifications, and errors reserved.

  1. For device type Bild 3.49 / Bild 3.43.
  2. For device type bild 3.55 oled.

The key number 3001 invalidates an identification number and thus the parental lock, please keep it in a safe place

LOEWE -logo

INDI IMPORTS PTY LTD.
P.O. BOX 9184
Brighton
Victoria 3186
Australia
Tel +61 3 94 16 70 37
E-Mail: info@indimports.com

37192001_OM2_bild_3_43-55_2_00_ML_Buch.indb
20.05.2019 11:32:51

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals