LOEWE Bild s 4K Television Instruction Manual
- June 12, 2024
- LOEWE
Table of Contents
Bild s 4K Television
Operating manual
|
---|---
http://myloeweandroid.loewe.tv| http://myloeweapple.loewe.tv
Introduction
Many thanksfor choosing Loewe and placing your trust in us.
By opting for Loewe, you have not only chosen a modern and technically
innovative television, but also gone for timeless design, razor-sharp picture
quality, brilliant sound for film and music enjoyment as well as intuitive
operation with the Loewe remote control, smart phone or tablet.
In short: Loewe stands for optimal home entertainment.
We wish you much pleasure with Premium Home Entertainment from Loewe and we
are glad to have you as a customer.
With the aim of a safe and long-term fault-free use of the set, before putting
the TV set into operation, please read the chapter Safety/ Warning on the next
page.
Delivery specification
- TV set
- Instruction manual 1
- Wall mounting Loewe wall mount WM7
- Welcome Box:
- Remote control assist with two alkaline batteries type AAA
- Mains cable
- Operating instructions 2 (these instructions)
- Installation instructions wall mount WM7
Documentation
This part of the operating manual contains essential basic information. The device is commissioned and set up by means of the intuitive operation guide after the device has been switched on for the first time. A detailed user handbook describing the functions and features of your new Loewe set can be downloaded in electronic form from the Loewe website.
https://my.loewe.tv/manuals/bild
The user handbook is updated regularly.
Please find a detailed user handbook here:
www.loewe.tv/en/support
Simply scan the QR code.
Visit our homepage under:
www.loewe-friends.de
Position of the rating plate Labels with model number and operating voltage
can be found on the back of the TV set.
Safety/Warning
For your safety, and to avoid unnecessary damage to your unit, please read and
follow the safety instructions below.
Key
This symbol indicates risks caused by high voltages.
** This symbol is to alert the user to other, more specific risks.
This symbol indicates dangers caused by the development of fire.
This symbol indicates dangers caused by sharp edges.
Do not remove set rear panel
Warning: When opening or removing the rear panel, there is the danger of
electric shock and the risk of serious injury from high voltages.
ATTENTION
ELECTRIC SHOCK DANGER – DO NOT OPEN
Never open the rear panel yourself. Leave repairs and servicing work on your
TV set to qualified, authorised television technicians.
Please contact your dealer or our customer service.
Intended use and environmental conditions
** This TV set is intended exclusively for the reception and playback of
picture and sound signals.
The TV set is designed for dry rooms (living rooms and office spaces). It must
not be used in rooms with a high level of humidity (e.g. bathroom, sauna),
outdoors, in mobile homes or boats.
When using the set, make sure that it is protected from moisture (dripping and
splashing water or condensation).
High humidity and dust concentrations lead to power leaks in the set. This can
lead to danger of injury and damage to the set by electric tensions or a fire.
If you’ve brought the set from the cold into a warm environment, leave it off
for around an hour due to the formation of condensation.
Do not place objects filled with liquid over the set. Protect the set from
dripping and splashing water.
Candles and other open flames must be kept away from the set at all times to
prevent the fire from spreading.
The materials we used in this device comply with all regulatory requirements.
However, the migration of substances cannot be ruled out. We therefore suggest
you avoid permanent contact between food and the TV set.
Transport
** Improper handling during transportation can lead to damage to the
display and risks of injury.
The screen consists of glass or plastic and can break if handled improperly.
At least two people are required to transport the set. Only transport the set
in a vertical position.
No pressure should be applied to the glass or the plastic during transport.
The correct unpacking of the set is shown in the operating manual 1.
To avoid damaging the mechanical structure of the TV set and the floor stand,
remove the TV set from its base and move the two parts separately. When the TV
set is set up in its new location, at least 2 people are required to
reassemble it.
Transport lock
** Before you start the first installation, remove the transport safety
screw be too guarantee the function of the kinematics!
Please refer the operating manual 1.
To avoid damaging the TV set during transportation, transport safety screw
must be screwed back before moving the TV. Remove the transport safety screw
before using the TV again!
Mains cable/power supply
Unplug the power cord immediately from the mains socket if you notice
something unusual, or the unit shows recurring malfunctions. ”
Incorrect voltages can damage the set.
This set may only be connected to a mains power supply with the voltage and
frequency indicated on the rating plate using the enclosed mains cable.
The mains power plug of the TV set must be easily accessible so that the set
can be disconnected from the mains at any time.
When pulling the mains power plug out, do not pull the cable but the plug
housing. The cables in the mains power plug could be damaged and cause a short
circuit when plugged in again.
A mains power cable with a damaged insulation can lead to electric shock and
presents a fire hazard. Never use a damaged mains cable.
Lay the mains cables so that they cannot be damaged. Do not tread on the mains
cable.
The mains cable must not be kinked or laid over sharp edges.
If you use a portable multiple socket to connect the TV set, do not cascade
several multiple sockets consecutively.
Air circulation and high temperatures
Like any electronic device, your TV set requires air for cooling. If air
circulation is impeded, it may result in a fire.
The ventilation slots on the rear panel of the set must therefore remain free.
Please do not cover the set.
Wall mounting: Leave at least 10 cm of space all around the set at the side,
above and below.
Table / stand
foot: Leave at least 10 cm clear space around the set at the side and at the
top.
Foreign objects
Foreign objects inside of the set can lead to short circuits and fires.
Danger of injury and damage exists.
Therefore avoid metal parts, needles, paper clips, liquids, wax or similar
passing through the ventilation slits of the rear panel into the interior of
the set.
Should something get into the interior of the appliance, immediately pull out
the mains power plug of the set and inform the customer service department for
checking.
Installation
**** Opting for an incorrect or wrongly mounted installation can lead to
accidents. Rolling or falling sets can cause injuries or damage.
Loewe TV sets are specified for Loewe accessories. We strongly recommend the
use of original Loewe installation options. Do not use any installation
options that are not approved for your TV set!
Note the instructions regarding the mounting for the different possible
installation options! A corresponding documentation is included with every
Loewe product.
Check before the installation of the set, whether the final location with
regard to the surface (pressure sensitivity) and stability (static) is
designed for the load from the set! This applies in particular to high-gloss
lacquered surfaces and surfaces made of real wood, real wood veneer and
plastic surfaces.
Only place the TV set on a level, stable, horizontal base with table or stand
foot!
The set should especially not protrude at the front when installing it in or
on furniture.
Do not place the television set on cloth or other materials that may be
located between television set and supporting furniture. Educate children
about dangers of climbing on furniture to reach the television set or its
controls.
The usual usage position of the TV set should be followed. The TV set can only
be operated horizontally upright A . The inclination can amount to a maximum
of 10 degrees for wall mounting B . The TV set must never be operated in
portrait orientation, C , horizontal D or overhead on the ceiling E .
Position the set so that it is not exposed to direct sunlight and additional
heating from radiators!
Do not place the TV in a location where vibrations can arise! This can lead to
damage.
In the case of installation options for third-party manufacturers with a motor
drive, it is to be ensured that the adjustment of the TV set does not occur
manually. It is generally not advisable to use the installation options of
other manufacturers with locking devices in certain positions.
When using accessories from third-party manufacturers, please ensure that you
can adjust the TV set easily to the respective installation option.
When adjusting the TV set, ensure that the pressure applied to the set frame
is not too great. Especially in large format displays, there is the danger of
damaging the display.
The mounting of a TV set on a holder according to the VESA standard requires
mandatory use of the VESA adapter bolts. Otherwise, damage to the TV may
result.
The Vesa adapter bolts must be attached to the TV set with a torque of circa 4
Nm.
You can obtain these from your Loewe dealer (you can find further information
found in the online user handbook).
Make sure that after unpacking and setting up the TV set the packaging
material does not fall carelessly into the hands of children.
Please also note the disposal instructions for packaging and carton (see
chapter Environment/Disposal/Licenses).
Supervision
** Do not let unsupervised children handle the TV set nor let them play in
the immediate vicinity of the TV set!
The set could be knocked over, moved or pulled down from the stand surface and
injure people.
Do not leave the TV set unattended when switched on!
Volume
**Loud music can lead to hearing damage. Avoid extreme sound volume,
especially over extended periods of time and when using headphones!
Thunderstorms
During thunderstorms, pull out the mains power plug and all connected antenna
cables from the TV set!
If you have connected a network cable to the LAN port, remove this as well!
Electrical surges due to lightning strike can damage the set both via the
antenna system and via the mains power supply.
Even in the case of prolonged absence, the mains power plug and all connected
antenna cables should be disconnected from the TV set.
Cleaning and care/chemicals
Before cleaning, switch the TV set off using the mains power switch!
Damages caused by chemicals can lead to adverse effects and development of
fire.
Never expose the set or accessories to aggressive (e.g. corrosive) chemicals
such as alkalis or acids!
Only clean the TV set, the front screen and the remote control with a damp,
soft, clean and colour neutral cloth, without any aggressive or scouring
cleaning agents!
The loudspeaker panel of your TV set is textile-covered. Hoover the surface
regularly with a soft brush attachment!
For contaminations or stains:
Moisten a soft, colour neutral cloth with detergent solution or commercially
available stain remove and rub the stain gently away! You can also treat the
stain directly with a commercial dry stain remover spray (hoover up the dust).
Do not moisten the covering fabric directly with detergent solution or stain
remover (risk of stain circle formation)! Do not use solvents to clean the
fabric!”
Note the usage instructions of the manufacturer when using stain remover!
When cleaning loudspeaker panels which have been exposed to nicotine, there is
an increased risk of stain circle formation.
Remote control button mapping
Depending on the application (TV / video / audio / photo / apps) and function (for example, DR +, EPG, PIP, Teletext, HbbTV etc.), the key assignment can deviate from the assignment described here (see corresponding chapter of the on-line user handbook).
-
Sound mute/on.
-
LED display for currently operated device.
-
Call the TV mode.
-
Reassign remote control to Set Top-Box(1(presetting: Apple TV).
-
Pressing briefly: Open the DR+ archive.
Pressing longer: Call timer. -
Pressing briefly: Add current object to Home favourite.
Pressing longer: Call up App Gallery or Mimi Defined™ (1 (3. -
EPG (Electronic Programme Guide) on/off.
-
Teletext/Media Text(2 on/off.
-
Pressing briefly: Call menu options for the active operating mode. Pressing longer: Call System settings.
-
V+/V– increase/reduce volume.
-
Pressing briefly: Call channel list.
Pressing longer: Call expanded channel list.
In the menu: confirm/call up. -
Green coloured key: screen on/off in Audio/Radio mode.
-
Red coloured key: call preferred value-added network service, if available (2.
-
Pressing briefly: skip backwards.
Pressing longer: winding backwards. -
Pressing briefly: direct recording (with determination of recording duration).
Pressing longer: One Touch Recording. -
Pause / Start/pause the time shift television.
-
Stop / End time shift (return to live image).
-
Pressing briefly: skip forwards.
Pressing longer: winding forwards. -
Play / Start/continue time shift television.
-
(selection of language/sound, subtitles or channel/video track).
-
Pressing briefly: Yellow coloured key: call history.
Pressing longer: Yellow coloured key: call last channel. -
▲▼◀ ▶ Navigation on the user interface, select objects.
In the menu / lists: select/set. -
P+/P– next/previous channel.
-
Pressing briefly: step / level back.
Pressing long: close all displays. -
Press briefly during an on-screen display: info display. Info text appropriate to the content that can assist you further, should you have any questions about your TV set.
Press briefly, without on-screen display: access status display. With status display open and repeatedly pressing the key call the detailed information on the broadcast.
Press longer: show key explanation. -
PIP (picture in picture) on/off.
-
Call up the Home view.
-
Select channels with numeric buttons directly.
In the menu: enter numbers or letters. -
Call Sources.
-
Reassign remote control to video device (1(presetting: Blotch Vision 3D).
-
Call radio mode (standard assignment)1 .
-
Switches the TV set on (mains switch must be turned on) or switches to standby mode.
Press briefly while TV set is switched on: TV set and all CEC-enabled devices connected to the HDMI ports will be switched off to standby (System Standby).
(1 The assignment of these keys can be changed. The description refers to the
standard setting. The factory setting of the keys can vary depending on the
firmware version of the remote control.
(2 Depending on the settings Hbb TV mode on/off, start behavior of Hbb TV
station (Systemeinstellungen → Bedizening → waiter… →Hbb TV).
(3 Default assignment for the long key press: Mimi-Defined™ on/off (if Mimi-
Defined™ is activated on the TV set), otherwise call up App Gallery.
Position and function of the connections (bilds.77)
-
Mains switch
-
AC IN – Mains connection
Mains socket – 220-240 V ~ 50 / 60 Hz
X Transport lock for kinematics
(please remove screw) -
Kensington lock slot
-
LAN – Network connection
RJ-45 – Ethernet / Fast Ethernet -
ANT SAT 1 – Satellite antenna
(Sat tuner 1) DVB-S/S2
F socket – 75 Ohm / 13/18 V / 500mA -
ANT SAT 2 -Satellite antenna
(Sat tuner 2) DVB-S/S2
F socket – 75 Ohm / 13/18 V / 500mA -
ANT TV – Antenna/cable analogue /
DVB-T / T2 / DVB-C
IEC socket – 75 Ohm / 5 V / 80mA -
HDMI 1 – HDMI input 1(1 (with Audio Return Channel)
HDMI – Digital Video IN/Audio IN/OUT -
HDMI 2 – HDMI input 2(1
HDMI – Digital Video IN/Audio IN -
USB 3.0 – USB connection
USB type A – USB 3.0 (max. 2A (4) -
MOTOR UNIT – rotating stand control
-
AUDIO OUT/TOSLINK – Audio output (analogue/digital)(3
Jack 3,5 mm (analogue) L/R
Mini To slink (digital) -
HEADPHONE – Headphone connection
Jack 3,5 mm – Headphones 32–200 Ohm -
RS-232C – Serial interface(2 – (RJ12)
15 AV – Center IN (2
Micro AV socket -
HDMI 3 – HDMI input 3(1
HDMI – Digital Video IN/Audio IN -
COMMON INTERFACE -CI slot 1 (standard V1.4)
-
COMMON INTERFACE -CI slot 2
(standard V1.4) -
HDMI 4 – HDMI input 4 (1
HDMI – Digital Video IN/Audio IN -
USB 2.0 – USB connection
USB type A – USB 2.0 (max. 2A (4) -
USB 3.0 – USB connection
USB type A – USB 3.0 (max. 2A)
(1 Before connecting an external device, please be aware that the individual
HDMI ports can work with a range of different signals, see online User
handbook, chapter Technical data, section bilds (across sets) –Signals via
HDMI/AV (PC IN).
(2 The adaptor is available as an accessory from your dealer.
(3 The analogue or digital output signal at the AUDIO OUT connector cannot be
used simultaneously.
(4 The maximum current of 2A is only accessible if one USB port is used. If
both USB ports are in use, the maximum current is divided between them.
Technical data (bilds.77)
Changes of technical data and design of the equipment reserved.
Loewe device type: | bilds.77 |
---|---|
Part number: | 60420D50 |
EU energy efficiency class: | see enclosed energy label or under |
www.loewe.tv/int/support
Screen diagonal:| 195 cm/77 inch
Power consumption On-Mode (max.) (Audio output 1/8 of the maximum value):| 550
W
Power consumption On-Mode (home): Energy consumption:| see enclosed energy
label or under www.loewe.tv/int/support
Power consumption quick start mode:| 60,0 W
Power consumption Standby Mode/ network standby mode:
when set is switched off:| 0,36 W / 1 W (10 W
Picture format / Resolution:| Ultra HD 3840 x 2160 px / 16:9
Display technology:| OLED (WRGB Pixel)
Device dimensions without stand (W (2 x H x D):| 173,1 x 102,3 x 7,3 cm
Weight without stand (approximate):| 37,0 kg
Ambient temperature:| 5° C – 35° C
Relative humidity (non-condensing):| 20 – 80%
Air pressure:| 800 – 1114 hPa (0 – 2000 m über NN)
Chassis designation:| SL512
Power supply:| 220 V – 240 V / 50 – 60 Hz
Tuner:| terr./cable: Satellite:| VHF/Hyperband/UHF
4 levels: 13/18V/22kHz / 16 levels: DiSEqC 1.0 / single-cable system: EN 50494
Bereich:| terr./cable: Satellite:| Terr./Kabel: 45 MHz up to 860 MHz
Satellite: 950 MHz up to 2150 MHz
Channel storage locations incl. AV and radio:| 6000
TV standards:| analogue:
digital:
| B/G, I, L, D/K, M, N
DVB-T/T2, DVB-C, DVB-S/S2 (UHD via DVB to max. 60 Hz)
Colour standards:| SECAM, PAL, NTSC, NTSC-V, PAL-V (60 Hz)
Sound formats:| analogue (FM): analogue (NICAM): digital (MPEG):| Mono,
Stereo, Dual channel Mono, Stereo, Dual channel
Mono, Stereo, Dual channel, PCM, Dolby Digital, Dolby Digital Plus, Dolby
Digital Pulse, Dolby
Virtual Speaker, Dolby Pro Logic II, Dolby Trued, Dolby MS11
Audio output power (sine / music):| 2 x 30W / 2 x 60W
Acoustic speaker concept:| Sound bar with 10 drivers (active and passive)
Teletext:| TOP / FLOF / HI Text (Level 2.5)
Page memory:| 2000
LAN:| Standards supported:| 10 Mbit/sec Ethernet (10Base-T)/100 Mbit/sec Fast
Ethernet (100Base-T)
WLAN:| Standards supported: Power/Frequency range:
Types of encoding that are supported:| IEEE 802.11a/b/g/n, 802.11ac
Maximum power <100 mW at 2400-2483,5 MHz and 5150-5725 MHz WEP 64 and 128 Bit
(ASCII and HEX), WPA PSK, WPA2 AES
Bluetooth:| Power/Frequency range: Bluetooth protocols:| Maximum power <10 mW
at 2,4 GHz A2DP SRC, A2DP SNK, HID
Home networking standard:| Universal Plug and Play Audio / Video (UPnP AV)
Formats supported (3: Balder:| JPEG, JPEG progressive (max. resolution
3840×2160), PNG
Audio:| MP3, M4A (AAC LC), WMA (hone lossless), FLAC, WAV (PCM), Ogg Orbis
Video:| AVI (MPEG-1/2, XviD, Dolby Digital, MP3), WMV (WMV9, VC-1, WMA9, WMA
Pro), MP4 (XviD, H.264/MPEG-4 AVC, AAC LC), MOV (H.264/MPEG-4 AVC, AAC LC),
MKV (H.265/HEVC, H.264/MPEG-4 AVC, Dolby Digital), FLV (H.264/MPEG-4 AVC,
H.263, MP3, AAC LC), MPG (MPEG-1, MPEG Audio), TS/PS (MPEG-2, H.264/MPEG-4
AVC, MPEG2 Audio, Dolby Digital), VOB (MPEG-2, MPEG2 Audio, Dolby Digital)
| H.264/MPEG-4 AVC up to Profil High (Level 4.2) H.264/H.265 compatible with
Dolby Vision/HDR10/HLG
(1 (Wool/Worland max.).
(2 The width of the TV set can be increased by up to 9,0 mm depending on the
type of TV set in the area of the side-mounted Loewe brand label.
(3 For the playability of the individual formats no guarantee can be given.
Environment
Power consumption
Your TV set is equipped with an eco-standby power supply. In the standby mode,
the power consumption drops to low power (see chapter Technical data). If you
want to save even more energy then switch the device off with the mains
switch. Please also note that the EPG data (Electronic Programme Guide) is
lost and possibly programmed timer recordings cannot be carried out by the TV
set.
The TV set will be completely separated from mains only when you unplug the
mains cable. The power consumed by the TV set during operation depends on the
energy efficiency preset in the initial installation or on the setting in the
system settings. To achieve the values specified in the technical data, it is
necessary to deactivate the settings “Wake-on-LAN”, “Mobile Recording” and
“Quick Start”.
If you activate these comfort functions, the annual energy consumption will
not increase by more than 20%. If you activate the automatic dimming, your TV
picture will adapt to the ambient brightness. This reduces the power
consumption of the TV set.
Automatic shutdown
If the TV is not operated for 4 hours (adjustment of volume, programme change,
etc.) the TV will automatically switch to stand-by mode to save energy. A
prompt to terminate this shutdown process appears one minute before the 4
hours expire.
By default, the automatic shut-off is active in the energy efficiency mode
Home-Mode/ Personal-Mode, Premium-Mode.
Automatic shutdown does not occur when using the radio without screen display
(screen off).
Disposal
You have chosen a very high-value and durable product.
Packaging and cardboard
The disposal of the packaging will be gladly handled for you by your
specialist dealer. If you dispose of the packaging yourself, dispose of the
packaging in sorted waste disposal and according to the local disposal
regulations. Place cardboard and paper in the waste paper, foils and
polystyrene in the recyclable waste collection.
The set
Your Loewe product is made with quality materials and components that are
recyclable and reusable.
This symbol means that electrical and electronic equipment incl. cables must
be disposed of separately from household waste at the end of their service
life.
You can return your old set for free at designated recycling centers, or at
your dealer, if you buy a similar new device.
Additional details about returns (even for nonEU countries) are also available
from your local government. They make an important contribution to the
protection of our environment.
The Batteries
**** The original equipment batteries do not contain harmful substances such
as cadmium, lead or mercury.
Used batteries should not be disposed of in household waste. Dispose of used
batteries free of charge in the collection containers set up at the dealer or
at the public collection points.
Licenses
Dolby, Dolby Audio, Dolby Vision and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation. Manufactured under license from
Dolby Laboratories. Confidential unpublished works.
Copyright © 2003-2015 Dolby Laboratories. All rights reserved.
This set contains a software which is partly based on the work of the
Independent JPEG Group.
This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/).
This software is provided by the OpenSSL project “as is“ and any expressed or
implied warranties, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose are disclaimed. In no
event shall the OpenSSL project or its contributors be liable for any direct,
indirect, incidental, special, exemplary, or consequential damages (including,
but not limited to, procurement of substitute goods or services; loss of use,
data, or profits; or business interruption) however caused and on any theory
of liability, whether in contract, strict liability, or tort (including
negligence or otherwise) arising in any way out of the use of this software,
even if advised of the possibility of such damage.
This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com).
This product includes software written by Tim Hudson
(tjh@cryptsoft.com).
This product contains software which was developed by third parties and / or
software which is subject to GNU General Public License (GPL) and/or GNU
Lesser General Public License (LGPL). You can pass on and modify them in
accordance with Version 2 of the GNU General Public License or optionally
every later version which is published by the Free Software Foundation.
The publication of this programme by Loewe is carried out WITHOUT ANY
GUARANTEE OR SUPPORT, particularly without an implicit guarantee concerning
MARKET MATURITY or the USABILITY FOR A SPECIFIC PURPOSE. Details can be found
in the GNU General Public License. You can obtain the software via the Loewe
customer service department. The GNU General Public License can be downloaded
from: http://www.gnu.org/licenses/.
Technical information
About the OLED screen
The TV set with OLED screen you have purchased satisfies the most rigorous
quality requirements and has been inspected with respect to pixel errors.
Despite of thorough care when manufacturing the display, it cannot be 100%
guaranteed that no subpixel defects will occur due to technical reasons.
Please understand that these types of effects, as long as they are within the
limits specified in the standard (ISO 9241-307, fault class II), cannot be
considered as a device defect in terms of the guarantee.
Organic Light Emitting Diodes are an image technology based on self-luminous
pixels that offer clear benefits in terms of image quality and performance.
Under certain conditions, persistent, one-sided loads on the OLED material can
result in persistence image faults which are irreversible.
Residual image issues can arise by using static image content over a longer
period, such as static images, subtitles or ticker displays, looping dia-shows
or video sequences, static displays serving as presentation monitors or with
video games, black bars in some screen formats.
These residual image issues are not defects within the meaning of the
warranty.
To minimize such issues, Loewe has developed a special algorithm for detecting
image content.
If static images are displayed for too long, the TV set automatically switches
to a screen-friendly contrast mode. After a new user operation, the device
immediately returns to its normal state. In addition, menu insertions are
gradually reduced or displayed transparently after one minute.
Under normal viewing conditions, such residual image issues do not arise.
Information about connected USB hard drives Switching off the TV set with the
mains switch during operation or an inadvertent disruption to the power supply
(e.g., power failure) can cause damage to the hard disk file system and hence
loss of the recorded broadcasts. Never ever disconnect the USB storage device
from the TV set during a copy process. Before switching off the set with the
mains switch, we recommend you to switch it to standby mode. If, contrary to
expectation, you are still experiencing problems with the operation of the
hard drive, you can first carry out a test. In addition, a formatting of the
hard disk can be remedy. In the process, however, all content on the hard disk
is deleted. You can find the corresponding menu items underr System settings
Control → more … →Hard disks.
Loewe are not liable for the loss of data on the integrated hard disk of your
TV set. To avoid data loss, we recommend copying important recordings to an
external storage medium.
Software-Update
It is possible to update the software on your Loewe TV set. In the software
update (package update) all the software releases in the TV set are scanned
and updated as required.
Current software versions can be downloaded from the Loewe Internet site (see
below) and installed on your TV set using a USB stick.
If your TV set is connected to the Internet, the TV set can be updated
directly via the Internet.
For more information on the software update, please refer to the user handbook
which can be downloaded from the Loewe Internet site.
Notes on Kinematics
The Loewe TV set is equipped with a kinematics that moves the TV set upwards
or downwards when switching it on and off, whereby the speaker cover is
visible or is hidden.
Please make sure that there is no externally applied force opposing the
movement. You have the option to fix the position of the kinematics from the
menu, or disable the function.
Possible installation options
You can use the following Loewe installation options listed for your TV set.
Do not use any installation options that are not approved for your TV set.
Item number | Name of the installation option |
---|---|
72730001 | Loewe wall mount WM7 |
60805D00 | Loewe table stand motor s.77 |
60804D00 | Loewe floor stand motor s.77 |
Conformity /Manufacturer’s declaration
** Loewe Technology hereby declares that this product meets the essential
requirements and other relevant provisions of Directive 2014/53/EU and all
applicable EU directives.
In the frequency range 5150 to 5350 MHz, this TV set is restricted to indoor
use in the following countries: Belgium, Bulgaria, Denmark, Germany, Estonia,
Finland, France, Greece, Ireland, Italy, Croatia, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, ustrina,
Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic,
Hungary, United Kingdom, Cyprus.
You can find the complete declaration of conformity in the product selection
at: www.loewe.tv/en/support
Imprint**
Loewe Technology GmbH
Industriestraße 11
D-96317 Cronbach
www.loewe.tv
Printed in Germany
Editorial date 09/20-1.0 MJ/JK/SB
© Loewe Technology GmbH, Cronbach
The information in this document is subject to change without notice and does
not constitute any obligation on the part of Loewe Technology
GmbH.
All rights including translation, technical modifications and errors reserved.
✄ The key number 3001 invalidates an identification number and thus the
parental lock.
Please keep it in a safe place.
loewe.tv
Loewe Technology GmbH,
Customer Care Center
Industriestraße 11
96317 Kronach, Deutschland
Tel +49 9261 99-500
Fax +49 9261 99-515
E-mail:ccc@loewe.de
Printed in Germany
Edition 1, 11.22 MJ/JK/LC
Documents / Resources
|
LOEWE Bild s 4K
Television
[pdf] Instruction Manual
Bild s 4K Television, Bild s, 4K Television, Television
---|---
References
- LOEWE - Premium Home Entertainment | TV & Home Cinema
- Audio Klan - dystrybutor sprzętu hi-fi audio i video: Yamaha, Loewe, Indiana Line i inni. - Audio Klan
- Licenses - GNU Project - Free Software Foundation
- Die Oberklasse - Foren-Übersicht
- LOEWE - Premium Home Entertainment | TV & Home Cinema
- Support Loewe | Nous sommes là pour vous aider | LOEWE
- Loewe Support | We helpen u graag | LOEWE
- Loewe Support - Wir helfen Ihnen weiter
- Loewe Support - Vi vil meget gerne hjælpe dig.
- LOEWE - Premium Home Entertainment | TV & Home Cinema
- Ayuda Loewe - Será un placer ayudarte.
- LOEWE – Premium home entertainment | TV & home cinema
- Support Loewe - Nous sommes là pour vous aider.
- Loewe Support - We will be pleased to help you
- Loewe Support - Saremo lieti di aiutarvi.
- LOEWE – Premium home entertainment | TV & home cinema
- LOEWE – Premium home entertainment | TV & home cinema
- Nordio ApS
- /index.html
- /index.html
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>