PeRo PB05 PD Power Bank Instructions

: September 27, 2024
: pero

Table of Contents

PB05 PD Power Bank
Specifications
Product Usage Instructions
1. Charging the Power Bank
2. Charging Devices
3. LED Indication
- FAQ
Q: How do I know when the power bank is fully charged?
Q: Can I charge multiple devices simultaneously?

PB05 PD Power Bank

“`html

Specifications

Battery capacity: 10,000 mAh
USB-A Output 1, 2: 4.5V/5A, 5V/3A, 9V/2A, 12V/1.5A
USB-C Output 3: 5V/3A, 9V/2.2A, 12V/1.6A
USB-C Input 1: 5V/3A, 9V/2A, 12V/1.5A
Micro USB Input 2: 5V/2A, 9V/2A, 12V/1.5A
Fast Charge 3.0
LED charge indicators

Product Usage Instructions

1. Charging the Power Bank

To charge the power bank, use either the USB-C Input or Micro
USB Input port with an appropriate cable and power source.

2. Charging Devices

Connect your device to one of the USB-A or USB-C Output ports
using a compatible cable to charge your device.

3. LED Indication

The LED indicators on the power bank show the remaining battery
capacity as follows:

75-100% – Full
50-75% – High
25-50% – Medium
0-25% – Low

FAQ

Q: How do I know when the power bank is fully charged?

A: The LED indicators will show a full charge when all lights
are solid without blinking.

Q: Can I charge multiple devices simultaneously?

A: Yes, you can charge multiple devices at the same time using
the different output ports provided.

“`

Instruction for PB05 10,000 mAh PD POWER BANK
EN
Dear customer!
Congratulations on your purchase of the PERO® device. It is recommended that the user read this manual entirely in order to make full use of the product For more information about PERO products, please visit our web-site: https://mypero.com
Owner’s manual. Power bank (hereinafter referred to as PB)
Specifications Battery capacity: 10,000 mAh; USB-A Output 1, 2: 4.5V/5A, 5V/3A, 9V/2A, 12V/1.5A; USB-C Output 3: 5V/3A, 9V/2.2A, 12V/1.6A; USB-C Input 1: 5V/3A, 9V/2A, 12V/1.5A; Micro USB Input 2: 5V/2A, 9V/2A, 12V/1.5A. Fast Charge 3.0 LED charge indicators
1. Package Contents
%

1. Package (pic. 1) 1.1 Power bank 1.2 Micro-USB cable

(i.1)
2. LED indication

75-100 %
50-75 %
25-50 %
<25 %
(i.2) 2. LED indicators (pic. 2) 2.1 Battery-power LED indicators will turn on by pressing lightly the power button.
Note: Any power bank will not deliver full-declared capacity to your device — some of this energy is lost through heat generated and voltage conversion. Please, check the specification of your phone or tablet’s battery to estimate how many full charges you can expect. If not stated otherwise expect to achieve around 70% of efficiency.

3. Charging Power Bank
Type-C Micro USB

3. Power bank charging (pic. 3)

(i.3)

Connect the compatible USB charger (purchased separately) to the wall outlet/ computer. Connect the micro-USB or Type-c connector to PB charger connector. The light indicators will turn on and the LED indicator will blink throughout the battery charging process, indicating its stage.

When the battery is fully charged, firstly disconnect the compatible charger from the PB, and then remove it from the power outlet. Hold the plug, but not the cord when disconnecting the charger.

4. Charging USB Device

TYPE-C

USB-A

(i.4)
4. USB device charging (pic. 4)
4.1 Connect your device to PB using the cable that comes with the power bank or your mobile phone/ tablet. 4.2 Press ON/OFF button once. 4.2 The illuminated LED indicator on PB indicates the charging process. As the external battery is discharged, more indicators will turn off on it. When your device is fully charged, the battery will turn off.
SAFETY INSTRUCTIONS
Read and follow all the instructions before using the product: 1 ) Do not expose PB to excessive moisture, water or dust. Do not install in locations with high moisture or dust. 2) Protect the device from heat: do not install it near heaters and do not expose it to direct sunlight. 3) The product is to be connected to power supply of the type specified in the owner’s manual only. 4) Clean the device only with dry cloth.

WARNING

Do not disassemble the enclosure. The battery may explode when damaged. It is not recommended to attempt to repair the device yourself, which will result in the loss of warranty.
The power bank must be stored in location with temperature ranging between 15 to 25 0 C for optimal performance. Too high/low temperature results in the loss of capacity and shorter lifetime of the battery. A device with an excessively heated or cooled battery may not work temporarily.
Do not dispose of batteries in a fire as they may explode.

Manufacturer: PERO Electronic Technology Co., Ltd. Address: Room 155-7, Capital Building, 175-191 Lockhart Rd, Wan Chai, Hong Kong. Importer: Absolut Group North-West LLC. 196210, St. Petersburg, st. Shturmanskaya, 19, lit. B, room 6-N. http://mypero.com

Disposal: Bring the used electronic products, batteries and packaging to the recycling collection points.

WARRANTY RESPONSIBILITY

The warranty period starts from the date of purchase of the product from the authorized Pero distributor. The date of purchase is specified on your sales receipt or delivery note. Repair, replacement or refunds within the period of warranty are made at the discretion of Pero. To obtain warranty service the product is to be returned to the distributor at the place of purchase together with a proof of purchase (sales receipt or delivery note).

Troubleshooting issue
The power bank does not charge

Solution

Adhere to the sequence of connections when connecting to the power supply (for charging). 2) Make sure that the power bank contacts fit tightly with the charger contacts and that they are not dirty. 3) Replace the cable.

PB05 10,000 mAh, PD
RU
!
PERO®. , , . PERO, , – http://mypero.com
. ( )
: 10 000 mAh; USB- 1, 2: 4.5/5A, 5/3A, 9/2A, 12/1 .5A; USB- 3: 5/3A, 9/2.2A, 12/1.6A; USB-C 1: 5/3A, 9/2A, 12/1.5A; Micro USB 2: 5/2A, 9/2A, 12/1.5A. 3.0 LED