tapo H100 Smart IoT Hub with Chime Instructions
- June 14, 2024
- tapo
Table of Contents
tapo H100 Smart IoT Hub with Chime
Product Information
The Tapo app allows you to control your Tapo Devices and Tapo Shortcuts conveniently from your iOS devices. With the widget feature, you can easily access and manage your Tapo Devices and check their status from the Today View on your iPhone, iPad, or iPod touch. To use this feature, make sure you have updated your Tapo app to the latest version.
- Step 1: Set up Widgets in the Tapo app
- Open the Tapo app and log in.
- Go to the Me page and tap on Widgets.
- Tap the edit icon and select the Tapo Shortcuts or Devices that you want to appear on the widget settings.
- You can reorder the icons by pressing and holding them, then dragging them to the desired position.
- Note: Tapo Device Status is currently only available for certain Tapo devices like sensors, which will be released soon.
- Step 2: Display Widgets in the iOS device
- Swipe right over the Home screen or Lock screen of your iPhone, iPad, or iPod touch to access the Today View.
- Scroll to the bottom and tap Edit.
- If your Apple device is running iOS 14 or above, slide the interface down to the low end and tap Customize. Skip this step if your device is below iOS 14.
- Tap “+” to add Tapo Device Quick Control, Tapo Shortcuts, and Tapo Device Status widgets.
- To reorder the widgets, touch and hold the next to the apps, then drag them in the desired order.
- Tap Done to finish.
- Now you can control your Tapo devices (on/off) and Tapo Shortcuts directly from the Today View on your iOS device.
- If any of your devices are offline, you will be prompted with an error message, and you can check the Tapo app for more details.
- To learn more about each function and configuration, please download the manual specific to your product from the Download Center.
Product Information
Two-Step Verification, also known as two-factor authentication or 2FA, is a security feature in the Tapo app that adds an extra layer of protection to your account. It requires a time-sensitive verification code when a new device attempts to sign in with your TP-Link account information, ensuring unauthorized access is prevented.
- How to Set up Two-Step Verification
- Open the Tapo Application.
- Go to the “Me” page and tap the Account Icon in the top left corner.
- Select “Login Security” from the options.
- Toggle ON Two-Step Verification.
- How Two-Step Verification Works for the Tapo App
- When enabling it for the first time, you will need to verify your account through your email.
- After enabling Two-Step Verification, any new device attempting to log in will need to verify using one of the following methods:
- a. APP Verification (Default Method): Verify by App Notification. A verification code will be sent via a Tapo app notification to your Trusted Device(s). Enter the code on the new device to complete the verification.
- Note: Make sure you have enabled notification permissions on your phone to use this feature.
- b. Email Verification (Alternative Method): Verify by Email. A verification code will be sent to the email registered to your TP-Link Account. Sign in to your email to view the code, then enter it on the new device to complete the verification.
How to use
How to use Widgets to control your Tapo Devices and Tapo Shortcuts on iOS
devices
Note: Please update your Tapo app to the latest version first. With
widgets, you can conveniently control your Tapo Devices/Shortcuts and check
Tapo Device Status from the Today View on your iPhone, iPad or iPod touch.
This guide will help you to set the widget feature of the Tapo app.
Step 1: Set up Widgets in the Tapo app
- Log in to the Tapo app. Go to the “Me” page and tap “Widgets”.
- Tap the edit icon and select the Tapo Shortcuts or Devices you want to appear on the Widget settings. You can press and hold the icon and drag them to reorder.
- Note: Tapo Device Status is available for certain Tapo devices, like sensors, which will be released soon.
- Note: Tapo Device Status is available for certain Tapo devices, like sensors, which will be released soon.
Step 2: Display Widgets in the iOS device
- Swipe right over the Home screen or Lock screen of your iPhone, iPad or iPod touch. You can see your widgets in the Today View. Scroll to the bottom and tap “Edit”.
- If your Apple device is iOS 14 or above, please slide the interface down to the low end, and tap “Customize”. If your Apple device is below iOS 14, please skip this step.
- Tap “+” to add Tapo Device Quick Control, Tapo Shortcuts, and Tapo Device Status widgets. To reorder your widgets, touch and hold the “≡” next to the apps and drag them in the order that you want. Tap “Done” to finish.
- Done! Now you can control your Tapo devices (on/off) and Tapo Shortcuts from the Today View.
If your devices are offline, any operation will be prompted that something went wrong, and you can go to the Tapo app for details. To get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Making Your Account
Making Your Account More Secure: Introducing Two-Step Verification (2FA) for the Tapo App
- User Application Requirement
- Updated 06-08-2022 01:42:15 AM 24399
- This Article Applies to:
What is Two-Step Verification?
Two-Step Verification (also called two-factor authentication or ‘2FA’) is
a security feature on the Tapo APP that helps add an extra layer of security
to your account. With Two-Step verification enabled, a new device that signs
into the app with your TP-Link account information will be asked to enter a
time-sensitive verification code to protect your account and prevent
unauthorized access.
How to Set up Two-Step Verification?
You can enable this feature from the Tapo Application. From ‘Me’ page, tap
the Account Icon in the top left > Login Security> Toggle ON Two-Step
Verification .
How does Two-Step Verification work for the Tapo APP?
- When enabling two-step verification for the first time, it will require you to verify your account through your email.
- After Two- Step Verification, new devices attempting to log in will have to verify using one of the methods specified below:
- a. APP Verification (Default Method): Verify by App Notification. A Verification Code will be sent via a Tapo app notification to Trusted Device(s). Enter the code on the new device to verify the new device.
- Note: Ensure that the Notification permission has been enabled on your phone to use this feature.
- b. Email Verification (Alternative method): Verify by Email. A Verification Code will be sent to your Email Registered to your TP-Link Account. Sign in your email to view the code. Enter this code on the new device to verify the new device.
Q&As
- Q1. How to turn off Two-Step Authentication?
- From ‘Me’ page, tap the Account Icon in the top left > Login Security> Then tap the Two-Step Verification ON/OFF toggle
- Note: Set Two-Step Verification ‘ON’ is highly recommended to enhance security level to your account.
- Q2. Will Tapo APP ask a Trusted Device to go through Verification before logging in again?
- No, a Trusted Device could skip the 2FA step when sign in your account without entering a verification code.
- Q3. How to remove a device from Trusted Devices? How to manage the Trusted Device?
- From ‘Me’ page, tap the Account Icon in the top left > Login Security > Trusted Devices> then tap the “X’ on the side of the device you would like to remove.
- Not need a stato coone tom To to De Are list, that evice will be force logged ou,
- Q4. Why my device shows a different location in Login Activity?
- Device location there is based on the IP address from Internet Service Provider and that may not align with the device real location, we do not use the GPS location of the device to determine location.
- If using a cellular connection, the app may indicate that a new device has logged in from far away.
Troubleshooting
- What should I do if I didn’t get the 2-Step verification code in my email inbox?
- First, check your Spam or Junk folder.
- Next, ensure that you are using the correct email account. From the ‘Me’ page, hit the Account Icon in the top left.
- Add TP-Link email address ‘ no-reply@email.tp-link.com ‘ into Whitelisted email senders or Safe Senders as this FAQ
- Contact our Support using the Same Email Account that you are trying to enable two-factor authentication for and please provide the following information:
* **a.** TP-Link ID/ Email account
* **b.** Tapo APP version
* **c.** Photos of Two-step verification Setup – Under My Account > Login Security
* **d.** The model of your Mobile Device & Android or IOS version.- What should I do if I did not receive a mobile notification with the code?
- Enable Notification permission for Tapo APP on the phone. Device should be able to get notifications from Tapo app property.
- Tap ‘Resend” to resend verification code.
- Ensure sure your phone is connected to the internet.
- Ensure that your Tapo APP is up to date.
- Tap ‘Did not receive a code?’ on the bottom > Receive Code via Email> tap Send Code
- What if I receive a Verification code but my new device didn’t try to sign in?
- If you receive a verification code but you do not recognize the device that sent the request, there is a chance that your account password has been compromised – but do not worry, the unrecognized user will be unable to login without the code provided by either your email or notification to another trusted device.
- We recommend immediately changing your account password and changing any other services that may use the same password. You can mitigate the chances of this happening to you by following these principles:
- Do not Reuse the same password across multiple platforms
- do not Rouse team a sword aeros multir pattern capias, and Symbols
- Use a password generator and manager
How to create
How to create Smart Action
(automation or a shortcut) of my Tapo devices
- Tapo Others
- Updated 03-31-2023 02:23:07 AM 41522
- This Article Applies to:
What are Tapo Smart Actions?
- For Tapo devices, there are two kinds of Smart Actions—Shortcuts and Automation.
Shortcuts
- Shortcut lets you perform an action with a simple tap. For example, when you are ready for bed, you can turn off your Tapo devices and dim the lights with one action.
Automation
- Automation allows you to use Tapo smart devices or Time as a trigger to control other Tapo devices or run a shortcut/automation task.
- For example, you might want to turn the lights on a few minutes before you get home from work every weekday.
- You can set up a trigger (When something happens) and an action (Then execute the action) in an automation.
Trigger List
| Trigger (When) | |
|---|---|
| Trigger Manually | Shortcuts: With one tap |
| Trigger Time | At Sunrise |
to Friday
At Sunset| Offset（±5h59min）
| At Specific Time| 00:00 ~ 23:59|
---|---|---|---
Trigger Device| Smart Camera (Vary by models)| Motion Detected| e.g. When your
Tapo Cam detects a motion
Person Detected
Baby Crying Detected
Area Intrusion Detected
Line Crossing Detected
Pet Detected
Camera Tampering Detected
…
Smart Wi-Fi Switch| Single Tap|
Smart Hub| Ring|
Smart Button| Single Tap|
Double Tap|
Rotate Clockwise|
Rotate Anticlockwise|
Motion Sensor| Motion Triggered|
Contact Sensor| Open|
Close|
Keep open for more than 1 minute|
Temperature and Humidity Sensor| Temperature above/below your set one|
Humidity above/below your set one|
Water Leak Sensor| Water Leak Detected|
Water Leak Solved|
Triggers may vary by product models and Tapo Care plans. More devices will be supported soon.
Action List
| Action (Then) | |
|---|---|
| Run a Shortcut | You need to create a shortcuts first. |
Home” shortcut
Enable/Disable Automation| You need to create an automation first.| e.g. Then
run “Turn on light” automation
Control Tapo Devices| Smart Camera| Enable Privacy Mode|
Disable Privacy Mode|
Enable/Disable Privacy Mode|
Smart Lighting| Turn On|
Turn Off|
Turn On/Off| e.g. Then turn on if it’s off and vice versa
Set Lighting to custom state (Brightness/Color/Mode/Effect)| e.g. Then turn on
to Christmas lighting effect
| | “On” Duration| e.g. Then turn on to 20% and then turn off after 2
minutes
---|---|---|---
Increase Brightness|
Decrease Brightness|
Increase Color Temperature|
Decrease Color Temperature|
Random Color|
Smart Plug/Power Strip/Switch| Turn On|
Turn Off|
Turn On/Off|
“On” Duration| e.g. Then turn on for 2 minutes
Dimmer Switch| Turn On|
Turn Off|
Turn on to last “On” state|
Turn on to custom brightness|
“On” Duration| e.g. Then turn on for 2 minutes
Increase brightness|
Decrease brightness|
Tapo Hub| Become Silent|
Ring|
Triggers may vary by product models. More devices will be supported soon.
How to Create
How to Create Smart Actions
Option 1: Edit based on the template
- Go to the Smart Actions page and you will see the Routine Actions (Shortcut or Automation).
- Tap on a featured action. Tap CREATE to change the settings as needed.
- Note: Tapo cameras only support Enable/Disable Privacy Mode.
- Note: Tapo cameras only support Enable/Disable Privacy Mode.
Option 2: Create your own actions
- Go to the Smart Actions page and tap + on the top right to add a Shortcut or an Automation.
- Customize triggers/actions for your smart action.
- Shortcuts
* **a.** Tap + to add actions.
* **b.** Name your shortcut and choose an icon for it. Tap Done to complete.
* **c.** You can run the shortcut with one tap on My Actions page or on the Home page.
2. **Automation**
* **a.** Tap + to add triggers (When) and actions (Then).
* If there are 2 or more triggers added, any trigger will activate the automation.
3. Name your smart action and set the effective time when the automation will take effect.
4. Your automation will execute when triggered during the effective time.References
- WiFi Networking Equipment for Home & Business | TP-Link
- Download Center | TP-Link
- TP-Link - Contact Technical Support
- What should I do if I don’t receive the email when I register cloud account or reset my password？ | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>