DELUX M618XSU Seeker Wired Vertical Mouse OLED Screen Black User Manual
- June 10, 2024
- DELUX
Table of Contents
DELUX M618XSU Seeker Wired Vertical Mouse OLED Screen Black
Thank you for choosing DELUX SEEKER, please read all instruct ions thoroughly before beginning the installation.
SYSTEM
Windows7 /Windows8/Windows 0/ MacOS
FUNCTIONS
Connection
Plug the power cable into USB port. Can be use after identified.
Light mode switching
4 types of light can be switched when you press right button and backward button at the same time
DPI switching
Tap DPI button to switch the DPI.
800 ( red light) -7 200 ( green light) -1600 ( blue light) -2400 ( purple
light) -4000 (yellow light)
Switching DPI successfully when the corresponding light flashed twice. Default
DPI: 1200(600-4000)
Report rate
125Hz-250Hz-500Hz-1 000Hz,
Default S00Hz, can be changed by the driver.
Thumb scroll wheel
Rolling u p ➔ Moving to the left
Rolling down ➔ Moving to the right ( can be used in office software, browser,
etc)
Driver installation
-
Installation
Download from DELUX website: www.deluxworld.com -
Setting
Opening the driver (when using the mouse) to set the functions.
A, Multi-group file configu ration
Click 11+11 on the top- left of the interface to create a new configuration fi
le.
Click The current configuration fi le can be deleted.
Click The current configuration file can be copied.
Click The current configuration file can be renamed
B, Light sett ing
Click ” Light setting” to set the light.
C, Button setting
Click “Button settings” to set the buttons.
Click after all settings done.
D, Macro management
Click “Macro management” to set the Macro.
Click “+” to create a new Macro, then click “REC” to record. Entering the key
that you need on the keyboard when recording. Click “STOP” to stop the Macro
recording.
Import Macro instru ction: se lect the button you need to set, then click
“Macro function” to choose Macro name, then click “save” to complete the
setting.
E’ DPI setting
Click 11Other settings11 to set the DPI.
F, Default Settings
Click to reset, then click 11OK” to complete the setting.
