Tylt Bowl Wireless Charging Pad User Manual
- June 5, 2024
- TYLT
Table of Contents
Wireless Charger
USER GUIDE
This is a wireless charger that will charge any device that supports the Qi standard, Please read the user manual before using it and keep it for future reference.
Specifications:
Input: 5V/2A or 9V/1.8A
Wireless Charging Output: 10W (Max.)
Wireless Distance: ≦6mm
Efficiency: ≧71%
Dimension: 180 x 140 x 60.5 mm
Weight: 70g
Use procedure
- Connect the device to the adapter with a USB cable.
- Power up the adapter.
- We can put the mobile phone or iPad right above the device
- The device is charging
FCC Statement:
bowl Wireless Charging Pad This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. LIGHT INDICATION Solid – Charging Blinking – Error This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator&your body.
IC Statement
This device complies with Industry Canada l icence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
These designs are representative of information architecture, indicating the priority and layout of page components. or the feel of the design.
PREPARED FOR TYLT CONTACT
Pawnee Farshi
pawnie@blakinc.com
877-524-2525 Ext. 701
2106_Bow User Guide_r2
04/03/20 / © 2020 Blak Inc. / www.blakinc.com