ONYX LZR Electric Bike Owner’s Manual
- June 9, 2024
- ONYX
Table of Contents
ONYX LZR Electric Bike
Please read this manual carefully before using the product. The manual
contains important instructions for the safe use and longevity of your bike.
If you need any type of support or warranty information for your LZR, please
contact ONYX before returning it back to where you purchased the bike. The
ONYX Support Team is ready to help you via phone or email. You can also visit
our website for more info.
Phone: 1.310.800.2531 (M-F 9am-5pm PST)
Email: info@onyxmotorbikes.com
Web: onyxmotorbikes.com
ASSEMBLY PREP
To prepare for the assembly of your LZR, first take out all pieces of the LZR
from the box and remove all packaging. Also, open the small parts box and
remove all tools, parts, and everything else that’s inside of it. Note that
the assembly process is the same for both the LZR PRO 900w and the LZR
500W.
INSTALL THE HANDLEBAR
Remove the four screws from the stem. Use the Y-Wrench Allen Key Tool to
remove the screws on the front of the stem.
INSTALL THE FRONT WHEEL
Be sure to remove the plastic front caliper brake pad spacer and the front
wheel axle before starting this step. Align the front wheel hub to the holes
on the forks. The brake rotor should be aligned so that it fits inside the
front brake caliper where you just removed the plastic brake pad spacer.
POWER ON/OFF
After long pressing the power button on the wood display for a few seconds the
indicators will flash on and display the first pedal assist mode. After a
moment the display will show the battery level and you are ready to ride. To
power off, long press the power button again for a few seconds and the unit
will turn off once you let go and the LED indicator lights turn off.
BATTERY LEVELS:
PEDAL ASSIST MODES
To switch between the 5 power levels of pedal assist, simply toggle the modes using the power button. A momentary press will move up from level 1 to level 5 with level 5 being at the very top of the LED indicators.
ASSIST MODES:
OPPERATION + SAFETY INSTRUCTIONS
For your personal safety, you must pay attention to the following safe use
of the LZR:
It is recommended to always wear a helmet when riding. Do not exceed the
maximum load of 300 lbs (136.1 kg) and no more than one rider at a time. When
riding in rain or snow, it will take longer to slow the vehicle. Be aware of
braking earlier than normal. Try to avoid riding in severe weather such as
heavy rain, snow, or wind.
For your personal safety, you must pay attention to the following safe use
of electric bicycles:
Do not park the LZR in building halls, evacuation stairs, or walkways. Do not
charge or park the LZR in residential buildings. Keep away from combustibles
when charging and do not leave charging for an extended period of time. The
battery should be used and maintained correctly in accordance with the method
required by this manual. The battery should not be disassembled without
authorization and should be recycled by professional experts. The charger
should be used and maintained correctly in accordance with the LZR. Carefully
read the warning labels and instructions of the charger before use. When
replacing the charger, it should be purchased from ONYX directly. Before
washing the LZR, you should read and understand the part of the manual
“Precautions for washing”. When adjusting the handlebars or saddles, care
should be taken not to expose the safety marks of the handlebars and saddles.
Always check your LZR before riding. If there are any issues found, please
seek professional assistance with solving the issue or repair. Always check
whether the front and rear brakes work normally. Always check that handlebars,
front and rear wheels, and all other parts of the LZR are tightened properly.
Precautions while riding:
Pay attention and observe all pedestrians, vehicles, obstacles, and others
using the road at all times. Do not drive under the influence of alcohol.
Anyone who suffers from diseases such as hypertension, hernia, concussion,
epilepsy, and cardiovascular disease should not ride the LZR. Do not follow
motor vehicles too closely (because they may slow down or turn at any time),
and always pay attention to the brakes. Do not touch things on the road with
your feet while riding. While riding at high speed, be sure to brake the bike
slowly and do not brake suddenly under any circumstances. When driving at
night, slow down, drive with caution, and use the lights of the vehicle. Try
to ride in designated bicycle lanes or the edge of the road and in the
direction of traffic flow. Stop at stop signs, slow down, and watch traffic at
intersections. Jackets, boots, trousers, gloves, etc. are effective protective
clothing to prevent abrasions if an accident were to occur while riding. It is
recommended to wear them to protect yourself. Do not wear loose clothing to
avoid the risk of entanglementin the moving parts of the LZR. Please wear
appropriate safety equipment according to the type of riding you plan to do.
It is best to wear a pair of sports sunglasses, which can reduce the damage of
ultraviolet rays to the eyes and protect the eyes from tree branches and
flying rocks or stones. Please perform regular maintenance and inspection of
your LZR. Please do not replace any parts yourself to avoid damage. If any
parts are damaged while riding that affect safety, please stop riding
immediately. You should not listen to music while riding (because when you
listen, it distracts your attention, and you cannot hear the sound of horns or
other sounds of motor vehicles, which is very dangerous) If you have any
problems while riding, please resolve the problem if possible or contact ONYX
customer care for help.
Precautions for washing the LZR:
When washing the LZR, do not directly pour water on the motor and the front
and rear axles to prevent water from affecting the performance and life of the
product. When washing the LZR, do not use a strong steam or high-pressure
water spray. After washing the vehicle or riding through water, pay special
attention to the working conditions of the brakes. The braking capability may
be reduced in these circumstances.
MAINTENANCE + TROUBLE SHOOTING
Inspection of handlebar + front & rear wheel:
Move the LZR up, down, front, back, left and right to check whether the
handlebars and the axle of the front and rear wheels are tightened properly,
whether the handlebars are tightened properly, and whether there is any
abnormal rubbing or damage happening between parts Push the LZR back and forth
to check whether the front and rear wheels rotate smoothly and without any
abnormal noise or rubbing. Carefully check the entire vehicle before riding
and if you find any issues, please contact a professional for repair or
contact ONYX customer care for help.
Inspection of power circuit:
Turn on the power, operate the pedal assist level switch, check that all
assist levels are selectable.
Inspection of front + rear brakes:
Pull the front and rear brake levers, and confirm whether the brakes are
working when the distance between the brake lever and the handlebar is ½ inch.
When the brake is in a tightly gripped state, the brake pad and the brake disc
should be contacting evenly. The brake pads and brake discs should be replaced
at the same time
Seat adjustment:
Proper seat adjustment is to sit on the seat with the toes of both feet
touching the ground.
Damage or contamination of reflectors:
Check weather the reflectors are dirty or damaged. If they are, clean or
replace them.
The fixed state of wheel axles:
Confirm the front and rear axles of the wheels are not shaking or loose.
Inflation, wear, and damage of tires:
Confirm whether the tire inflation is appropriate. Improper inflation can
cause punctures and loosing of parts of the LZR. In addition, determine
whether there is a high amount of wear or any foreign objects or nails in
either of the tires. If so, do not ride before fixing the issue or repairing
the tire(s).
Adjustment of pedals or other moving parts:
The pedals should rotate smoothly. If either is loose, please tighten.
Charge port:
Check to make sure the charge port is not damaged. Check to make sure there
are no foreign objects in the charge port. Check that the port is not deformed
and the port cover is not damaged.
LIMITED MANUFACTURER’S WARRANY
The LZR comes with a limited manufacturer’s warranty and is covered from any
defects or issues that are outside of normal wear & tear within the warranty
period and terms outlined at onyxmotorbikes.com
Do not modify the LZR as it will void your warranty and introduce potential
safety issues. Read and understand all safety warnings listed on the product
label and in this manual. Proof of purchase must be verified before any
warranty claim is filed. Warranty terms only apply to the original owner. If
you need any type of support or warranty information for your LZR, please
contact us before returning it back to where you purchased it. The ONYX
Customer Care Team is ready to help you via phone or email and you can also
visit onyxmotorbikes.com for more info.
Phone: 1.310.800.2531 (M-F 9am-5pm PST)
Email: info@onyxmotorbikes.com
Web: onyxmotorbikes.com
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy; if not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications. There
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by powering the equipment off and on, the
user is encouraged to try to correct the interference by using any of the
following measures:
- Reorienting or relocating the receiving antenna.
- Increasing the separation between the equipment and receiver.
- Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Prop 65 Warning
This product can expose you to chemicals including chromium, which is known to
the State of California to cause cancer and birth defects or other
reproductive harm.
For more information go to:
http://www.p65warnings.ca.gov.
Proper Frame Sizing
Documents / Resources
| ONYX
LZR Electric
Bike
[pdf] Owner's Manual
LZR Electric Bike, LZR, Electric Bike, Bike
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>