MEETION K210 Wireless Bluetooth Keyboard User Manual
- June 17, 2024
- MEETION
Table of Contents
MEETION K210 Wireless Bluetooth Keyboard
ikey K210
USER’S MANUAL
WIDELECC KEVDAn
MULTIMEDIA FUNCTION KEYS
2.4G CONNECTION(KEYBOARD)
- Open the accessory box and remove the receiver from it
- Turn on the keyboard power switch
- Short press “fn” and “2.4G” at the same time Green light on, switch to 2.4G channel
- Insert computer USB interface
BLUETOOTH CONNECTION(KEYBOARD
- Turn on the keyboard power switch
- Short press “fn” and “Bluetooth 1” at the same time Blue light is on, switch to Bluetooth 1 channel;Long press again for 3s, blue light flashes, enter Bluetooth 1 pairing mode
- Turn on the computer Bluetooth switch to enter the Bluetooth settings page Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Find the device named Meetion_KB_BT1 and click on Add Pairing
Paired successfully
BLUETOOTH Connection(KEYBOARD)
- Turn on the keyboard power switch
- Short press “fn” and “Bluetooth 2” at the same time Blue light is on, switch to Bluetooth 2 channel; Long press again for 3s, blue light flashes, enter Bluetooth 2 pairing mode
- Turn on the computer Bluetooth switch to enter the Bluetooth settings pageClick to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Find the device named Meetion_KB_BT2 and click on Add Pairing
Paired successfully
BLUETOOTH CONNECTION(KEYBOARD)
Turn on the keyboard power switch
Short press “fn” and “Bluetooth 3” at the same time Blue light is on, switch to Bluetooth 3 channel; Long press again for 3s, blue light flashes, enter Bluetooth 3 pairing mode
Turn on the computer Bluetooth switch to enter the Bluetooth settings page
Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
Find the device named Meetion_KB_BT3 and click on Add Pairing
Paired successfully
CHARGE INDICATION (KEYBOARD)
This red light is blinking, the battery is low
This red light is always on, the battery is charging
Red light is off, battery is fully charged
Note: The charging voltage should not exceed 5V, otherwise the product circuit will be damaged,
GENERAL
All products under the MEETION brand comply with the US FCC standards with
FCC ID : 24706. The product is made in accordance with RoHS standard.
PRECAUTIONS
- This product contains a rechargeable lithium battery.
- Do not dismantle, strike, crush, or put it into a fire.
- Stop using it immediately if severe swelling occurs.
- Do not place it in a high-temperature environment.
- Do not use this device near water.
- Only use a dry cloth to clean this product.
- Please follow the manufacturer’s instructions for use.
- If the device is damaged, for example, if liquid enters it, if it gets wet in the rain or becomes damp, or if it cannot operate normally, it must be repaired. For repair matters, it should be entrusted to qualified maintenance personnel.
KIND TIPS
If the product is not in use for a long time, it is recommended to charge it
every three months to activate the lithium battery inside the product and
prevent battery failure due to long periods of non-use.
WARRANTY CARD
- TECHNICAL SUPPORT
- Having technical problems with this product?
- Send an email to service@meetion.com
- For more information please visit: www.meetion.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>