STARLINK 082724 Pipe Adapter Installation Guide

: September 25, 2024
: Starlink

Table of Contents

082724 Pipe Adapter
Product Specifications
Product Usage Instructions
1. Remove Kickstand
2. Route Cable Through Pipe Adapter and Plug In Cable
3. Install Pipe Adapter
4. Mount Starlink to Pipe
5. Align Your Starlink
6. Lock Alignment
- Frequently Asked Questions (FAQ)
Q: How do I know if my Starlink is properly aligned?
Q: What should I do if my Starlink is not securely attached

082724 Pipe Adapter

“`html

Product Specifications

Product: Pipe Adapter
Dimensions: 101.5 mm x 172 mm x 44.7 mm (4 in x 6.77 in x 1.76
in)
Website: support.starlink.com

Product Usage Instructions

1. Remove Kickstand

Squeeze the release tab and pull it away from its fixed
location.

2. Route Cable Through Pipe Adapter and Plug In Cable

Route the Starlink cable through the opening in the pipe adapter
and out the front end. Plug the cable into your Starlink and ensure
the plug is fully inserted such that the plug face is flush with
the surface.

3. Install Pipe Adapter

Slide the mount into your Starlink until it clicks into place
and pipe adapter is fully inserted on both sides.

4. Mount Starlink to Pipe

Loosen the locking thumbscrew and slide the Pipe Adapter onto
your mounting pipe. Temporarily tighten the thumbscrew to stabilize
Starlink onto pipe. Connect the other end of the Starlink cable to
the power supply and plug it into a power outlet.

5. Align Your Starlink

An alert on the App will show if you need to rotate Starlink to
be properly aligned. Click the alert to use the alignment tool.

6. Lock Alignment

Tighten the thumbscrew on the Pipe Adapter Mount to lock your
Starlink in place. Ensure your Starlink is firmly attached.

Frequently Asked Questions (FAQ)

Q: How do I know if my Starlink is properly aligned?

A: An alert on the App will indicate if alignment is required.
Use the alignment tool by clicking on the alert.

Q: What should I do if my Starlink is not securely attached

after installation?

A: Ensure that all connections are tight and that the locking
thumbscrew on the Pipe Adapter Mount is securely fastened to lock
your Starlink in place.

“`

| PIPE ADAPTER INSTALL GUIDE

PIPE ADAPTER What’s In The Box
Pipe Adapter

101.5 mm
(4 in)

172 mm
(6.77in)

44.7 mm
(1.76 in)

support.starlink.com

PIPE ADAPTER INSTALL 1 | Remove Kickstand
Squeeze the release tab and pull it away from its fixed location.
2 | Route Cable Through Pipe Adapter and Plug In Cable
Route the Starlink cable through the opening in the pipe adapter and out the front end. Plug the cable into your Starlink and ensure the plug is fully inserted such that the plug face is flush with the surface.
support.starlink.com

PIPE ADAPTER INSTALL 3 | Install Pipe Adapter
Slide the mount into your Starlink until it clicks into place and pipe adapter is fully inserted on both sides.
4 | Mount Starlink to Pipe
Loosen the locking thumbscrew and slide the Pipe Adapter onto your mounting pipe. Temporarily tighten the thumbscrew to stabilize Starlink onto pipe. Connect the other end of the Starlink cable to the power supply and plug it into power outlet.
support.starlink.com

PIPE ADAPTER INSTALL 5 | Align Your Starlink
An alert on the App will show if you need to rotate Starlink to be properly aligned. Click the alert to use the alignment tool.
6 | Lock Alignment
Tighten the thumbscrew on the Pipe Adapter Mount to lock your Starlink in place. Ensure your Starlink is firmly attached.
support.starlink.com