STARLINK 061824 Mini Pivot Mount Installation Guide

: September 26, 2024
: Starlink

061824 Mini Pivot Mount

Specifications:

Mount Dimensions: 425 mm x 140 mm x 311 mm (16.7 in x 5.5 in x
12.2 in)
Mast Adapter Dimensions: 223 mm (8.78 in)
Recommended Tools: Drill / Impact Driver, Drill Bit 6 mm (1/4
in), Hex Socket 9/16 in, Marker, Level
Components: Sealant Tape Strips, Sealant Tape Squares, Pivot
Mount, Mast Adapter, Mast, Lag Screws 2x (3/8 in x 3.5 in), Cable
Routing Clips 20x

Product Usage Instructions:

1. Download the Starlink App

Scan the QR code to download the Starlink App.

2. Find Mounting Location

Your Starlink needs a clear view of the sky for optimal
connectivity with satellites. Use the obstruction tool in the App
to select a suitable mounting location.

3. Remove Kickstand

Squeeze the release tab and pull it away from its fixed
location.

4. Mark the Pilot Holes

Using a marker, mark the location of the two holes on the pivot
mount directly over a structural beam for secure installation.

5. Drill the Pilot Holes

Drill the marked holes using a 6 mm (1/4 in) drill bit.

6. Apply Sealant and Screw in Wall Mount

Ball up the sealant tape squares and push them into the drilled
holes. Apply sealant tape over the holes before screwing in the
mount.

7. Screw in Mount Base

Screw in the mount using the provided screws with the arrow on
the mount pointing up the slope of your roof.

8. Align Mast Vertically

Tighten the bottom locking mechanism when the mast is
vertical.

9. Insert Mast Base

Insert the mast tube into the base until it clicks into
place.

10. Route Cable Through Mast

Insert the DC Power Cable through the hole in the side of the
mast and up through the slot in the adapter.

11. Plug-In Cable and Install Mast

Plug the cable into your Starlink, ensuring it is fully
inserted. Slide the mast in until it clicks into place.

12. Insert Starlink into Pivot Mount

Slide the mast into the pivot base, rotate your Starlink for a
clear view of the sky, and connect the DC Power Cable to power
supply.

13. Align and Lock Your Starlink

Use the alignment tool on the App to ensure proper alignment.
Tighten the thumb-screw on the mast to prevent rotation once
aligned.

FAQ:

Q: What should I do if my Starlink connection is unstable?

A: Check for any obstructions blocking the signal path between
your Starlink and satellites. Ensure proper alignment and
unobstructed view of the sky.

Q: Can I adjust the angle of my Starlink once installed?

A: Yes, you can rotate your Starlink by adjusting the pivot
mount to achieve a clear view of the sky for optimal
performance.

| MINI PIVOT MOUNT INSTALL GUIDE

MINI PIVOT MOUNT What’s in the Box

Sealant Tape Strips

Sealant Tape Squares

Pivot Mount
Recommended Tools

Mast Adapter

Mast

Lag Screws 2x
3/8 in x 3.5 in

Cable Routing Clips 20x

Drill / Impact Driver

Drill Bit 6 mm (1/4 in)

Hex Socket 9/16 in

Marker

Level

425 mm
(16.7 in)

140 mm
(5.5 in)

311 mm
(12.2 in)

90°
223 mm
(8.78 in)

INSTALL 1 | Download the Starlink App
Scan the QR code to download the Starlink App.
2 | Find Mounting Location
Your Starlink needs a clear view of the sky so it can stay connected with satellites as they move overhead. Objects that obstruct the connection between your Starlink and the satellite, such as a tree branch, pole, or roof, will cause service interruptions. Use the obstruction tool in the App to ensure you have selected a suitable mounting location.
3 | Remove Kickstand
Squeeze the release tab and pull it away from its fixed location.
support.starlink.com

INSTALL
4 | Mark the Pilot Holes
Mark the location of the two holes on your pivot mount using a marker. Place the holes directly over a structural beam to best secure your Starlink.
5 | Drill the Pilot Holes
Drill the holes with a 6 mm (1/4 in) drill bit.

6mm | (1/4 in)

6 | Apply Sealant and Screw in Wall Mount
Ball up the squares and push them into the holes, then apply the sealant tape over the holes.

INSTALL
7 | Screw in Mount Base
Screw in the mount using the provided screws. The arrow on the mount should point up the slope of your roof.

8 | Align Mast Vertically

Tighten the bottom locking mechanism when mast is vertical.

!

9 | Insert Mast Base
Insert the mast tube into the base until it clicks into place.

INSTALL
10 | Route Cable Through Mast
Insert the DC Power Cable through the hole in the side of the mast and up through the slot in the adapter.
11 | Plug-In Cable and Install Mast
Plug the cable into your Starlink. Ensure the plug is fully inserted such that the plug face is flush with the surface. Next, slide the mast in until it clicks into place.

INSTALL
12 | Insert Starlink into Pivot Mount
Slide the mast into the pivot base. Rotate your Starlink to face a clear view of the sky. Connect the DC Power Cable to the power supply and connect to power.
13 | Align and Lock Your Starlink
An alert on the App will show if you need to rotate Starlink to be properly aligned. Click the alert to use the alignment tool. Once aligned, tighten the thumb-screw on the mast to prevent rotation.