dji Phantom 4 Pro V2.0 Drone User Guide

June 7, 2024
DJi

Phantom 4 Pro V2.0 Drone
Quick Start Guide
v1.2

dji Phantom 4 Pro V2.0 Drone - 11

The DJI PHANTOMTM 4 Pro V2.0 is a smart prosumer flying camera capable of shooting 4K video at 60 fps and at up to 100 Mbps, and capturing 20-megapixel stills. 4 directions of obstacle avoidance allow it to intelligently avoid obstacles during flight. Using TapFlyTM and ActiveTrackTM through the DJI GOTM 4 app, you can fly anywhere visible on your screen or track a moving subject smoothly and easily with a simple tap. The camera uses a 1-inch CMOS sensor offering unprecedented clarity, lower noise, and better quality images. In addition to the above features, improved propulsion system efficiency means aircraft noise is 4dB (60%) lower than on the Phantom 4 Pro.dji Phantom 4
Pro V2.0 Drone - parts 1dji Phantom 4 Pro V2.0 Drone - parts
2

1. Gimbal and Camera
2. Downward Vision System
3. Micro USB Port
4. Camera/Linking Status Indicator
and Link Button
5. Camera Micro SD Card Slot
6. Forward Vision System
7. Infrared Sensing System

8. Front LEDs| 9. Motors
10. Propellers
11. Aircraft Status Indicators
12. Antennas
13. Rear Vision System
14. Intelligent Flight Battery
15. Power Button
16. Battery Level Indicators
---|---

  • The Vision and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the tutorials in the DJI GO 4 app or on the official DJI website to learn more. http://www.dji.com/phantom-4-pro-v2

Remote Controller

The powerful remote controller of the Phantom 4 Pro V2.0 has a transmission range extending up to 5 mi (8 km)*. It features physical buttons and dials to control exposure, camera tilt, photo capture, and video recording. Built into the remote controller is DJI’s latest long-range transmission technology OCUSYNCTM, which when paired with a compatible mobile device gives you a live HD view from the Phantom’s camera. Dual-frequency support makes the HD video downlink more stable.

dji Phantom 4 Pro V2.0 Drone - parts 3

1. Power Button
2. Return-to-Home (RTH) Button
3. Control Sticks
4. Status LED
5. Battery Level LEDs
6. Power Port
7. Mobile Device Holder
8. Small Device Positioning Tabs(for mobile phones)
9. Antennas
10. Handle Bar| 11. Gimbal Dial
12. Camera Settings Dial
13. Record Button
14. Flight Mode Switch
15. Shutter Button
16. Intelligent Flight Pause Button
17. C1 and C2 Buttons (customizable)
18. USB Port
19. Micro USB Port
---|---

The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left, and right movements. The gimbal dial controls the camera’s tilt.

dji Phantom 4 Pro V2.0 Drone - dji Phantom 4 Pro V2.0
Drone

  • The remote controller is able to reach its maximum transmission distance (FCC) in a wide-open area with no Electro-Magnetic Interference, and at an altitude of about 400 feet (120 meters).

    1. Download the DJI GO 4 App
      Search for `DJI GO 4′ on the App Store or Google Play, and install the app on your mobile device.http://m.dji.net/djigo4

    2.   Watch the Tutorial Videos
      Watch the tutorial videos at www.dji.com or in the DJI GO 4 app.

www.dji.com/phantom-4-pro-v2/info#video

DJI GO 4 App DJI GO 4 supports iOS 9.0 (or later) or Android 4.4 (or later).

  1. Check the Battery Levelsdji Phantom 4 Pro V2.0 Drone -level Press once to check the battery level. Press once, then again and hold to turn on/off.
  2. Charge the Batteriesdji Phantom 4 Pro V2.0 Drone - 4 When charging is complete, the battery level indicators will automatically turn off.
  3.  Prepare the Remote Controllerdji Phantom 4 Pro V2.0 Drone - 58
  4. Prepare for Takeoffdji Phantom 4 Pro V2.0 Drone -5 Check that the propellers are secure before each flight.
  5. Flight

Ready to Go (GPS)
Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app indicates Ready to Go (GPS)’ orReady to Go (Vision)’ if flying indoors.
In the DJI GO 4 App:

Auto Takeoff
The aircraft will take off and hover at an altitude of 4 feet (1.2 meters).

Auto Landing
The aircraft will land vertically and stop its motors.

Return-to-Home (RTH)
Bring the aircraft back to the Home Point. Tap again to stop the procedure.

Normal
You are in control of the Phantom, with satellite and Return-to-Home support.

TapFly
Tap on your screen to fly your Phantom in that direction, avoiding obstacles as it flies.

ActiveTrack
Mark an object on your screen to track it as it moves.

Watch the tutorial in the DJI GO 4 app or on the official DJI website to learn more.
Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks. Refer to the Disclaimer and Safety Guidelines for more details.

Manual Takeoff

dji Phantom 4 Pro V2.0 Drone - manual

  • Rotating propellers can be dangerous. Do not start the motors when there are people nearby.
  • Always keep your hands on the remote controller so long as the motor is still spinning.
  • Stop motor mid-flight: Pull the left stick to the bottom inside corner while simultaneously pressing the RTH button. Only stop motors mid-flight in emergency situations when doing so can reduce the risk of damage or injury. Refer to the user manual for details.

Manual Landing

dji Phantom 4 Pro V2.0 Drone - Landing

It’s important to understand basic flight guidelines, for the safety of both you and those around you. Don’t forget to read the Disclaimer and Safety Guidelines.

Specifications

Aircraft

Weight (Battery & Propellers Included) 1375 g
Max Ascent Speed S-mode: 6 m/s; P-mode: 5 m/s
Max Descent Speed S-mode: 4 m/s; P-mode: 3 m/s
Max Speed 45 mph (72 kph) (S-mode); 36mph (58 kph) (A-mode); 31 mph (50 kph)

(P-mode)
Max Service Ceiling Above Sea Level| 19685 ft (6000 m)
Max Flight Time| Approx. 30 minutes
Operating Temperature| 32° to 104° F ( 0° to 40° C)
GNSS| GPS+GLONASS
Operating Frequency| 2.400 – 2.483 GHz and 5.725 – 5.850 GHz
Transmitter Power (LIMP)| 2.4 GHz: C26 dBm (I-CC); C20 dBm (CL); C20 dBm (SRRC) 5.8 GHz:26 dBm (FCC); 14 dBm (CE); 26 dBm (SRRC)
Hover Accuracy Range| Vertical: ±0.1 m (With Vision Positioning); ±0.5 m (With GPS Positioning) Horizontal: ±0.3 m (With Vision Positioning); ±1.5 m (With GPS Positioning)

Gimbal

Controllable Range| Pitch: -900 to +30°
Vision System
Velocity Range| ≥31 mph (50 kph) at 6.6 ft (2 m) above ground
Attitude Range| 0 – 33 ft (0- 10 m)
Operating Range| 0 – 33 ft (0- 10 m)
Obstacle Sensory| 2- 98 ft (0.7 – 30 m)
Range Operating Environment| Surfaces with clear patterns and adequate lighting (> 15 lux)
Infrared Sensing System
Obstacle Sensory Range| 0.6 – 23 ft (0.2 – 7 m)
Operating Environment| Surface with diffuse reflection material, and reflectivity > 6% (such as wall, trees, humans, etc.)
Camera
Sensor| 1″ CMOS; Effective pixels: 20M
Lens| FOV (Field of View) 84°. 8.8 mm (35 mm format equivalent: 24 mm). f/2.8 – f/11, auto focus at 1 m – 0.0
ISO Range| Video: 100 – 3200 (Auto); 100 – 6400 (Manual); Photo: 100 – 3200 (Auto); 100 – 12800 (Manual)
Mechanical Shutter| 8 – 1/2000 s
Electronic Shutter| 8 – 1/8000 s
Max Image Size| 3:2 Aspect Ratio: 5472×3648; 4:3 Aspect Ratio: 4864×3648: 16:9 Aspect Ratio: 5472×3078
Still Photography Modes| Single Shot
Burst Shooting: 3/5/7/10/14 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias
Interval: 2/3/5/7/10/15/30/60 s
Video Recording  Modes| | H.265| H.264|
---|---|---|---|---
C4K:| 4096×2160 24/25/30p| C4K:| 4096×2160 24/25/30/48/50/60p
4K:| 3840×2160 24/25/30p| 4K:| 3840×2160 24/25/30/48/50/60p
2.7K:| 2720x 1530 24/25/30/48/50/60p| 2.7K:| 2720×1530 24/25/30/48/50/60p
FHD:| 1920×1080 24/25/30/48/50/60/120p| FHD:| 1920x 1080 24/25/30/48/50/60/120p
HD:| 1280×720 24/25/30/48/50/60/120p| HD:| 1280×720 24/25/30/48/50/60/120p

Video Storage Bitrate: 100 Mbps
Supported File Systems: FAT32 ( 32 GB); exFAT (> 32 GB)
Photo :JPEG, RAW (DNG), JPEG + RAW
Video: MP4/MOV (AVC/H.264; HEVC/H.265)
Supported SD Cards: Micro SD, Max Capacity: 128 GB. Class 10 or UHS-1 rating required
Operating Temperature: 32° to 104° F (0° to 40° C)
Remote Controller
Operating Frequency :  2.400 – 2.483 GHz and 5.725 – 5.850 GHz
Max Transmission Distance:  2.4 GHz: 5 mi (8 km, FCC); 3.1 mi (5 km, CE); 3.1 mi (5 km, SRRC) (Unobstructed, free of interference) 5.8 GHz: 5 mi (8 km, FCC); 3.1 mi (5 km, CE); 3.1 mi (5 km, SRRC)
Operating Temperature 32° – 104° F (0° – 40° C)
Battery :6000 mAh LiPo 2S
Transmitter Power (EIRP): 2.4 GHz: 26 dBm (FCC); 20 dBm (CE); 20 dBm (SRRC 5.8 GHz: 26 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC
Operating Voltage : 1.2 A @ 7.4 V
Charger

Voltage: 17.4 V
Rated Power: 100 W
Intelligent Flight Battery (PH4-5870mAh-15.2V)
Capacity: 5870 mAh
Voltage: 15.2 V
Battery Type: LiPo 4S
Energy Net: 89.2 Wh
Weight Charging: 468 g
Temperature Range: 41° to 104° F (5° to 40° C)
Max Charging Power: 100 W

dji Phantom 4 Pro V2.0 Drone - diagram

For online support, please scan this code with Facebook Messenger

Download the user manual for more information: http://www.dji.com/phantom-4-pro-v2
This Quick Start Guide is subject to change without prior notice.

PHANTOM is a trademark of DJI.
Copyright © 2019 DJI All Rights Reserved.
Printed in China.

Phantom 4 Pro V2.0
www.dji.com

dji Phantom 4 Pro V2.0 Drone - sn

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals