rizoma Yamaha MT-07 User Manual
- June 3, 2024
- rizoma
Table of Contents
rizoma Yamaha MT-07
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future.
Attention
This component comes assembled for shipping purposes only. Tighten all
fasteners to appropriate torque specifications before riding. Descriptions
preceded by this symbol contain information, instructions, or procedures,
which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped, or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case, never try to repair or modify the Rizoma products or their components, always replace them with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety, Rizoma suggests always contacting your RIZOMA dealer. O.E.M.: original equipment manufacturer.
- Consult the website www.rizoma.com, in the ZYF048 headlight fairing section click “MEDIA” to download the PDF document approval ABE.
- Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
WARNING
TO CLEAN YOUR HEADLIGHT FAIRING DON’T USE DETERGENT, AGGRESSIVE PRODUCTS, OR
ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR HEADLIGHT FAIRING, BUT USE
ONLY NEUTRAL DETERGENT WITH COLD WATER.
WARNING
DO NOT EVER TRY TO CLEAN OR ADJUST THE HEADLIGHT FAIRING DURING DRIVING THE
MOTORCYCLE. THE BIKER WILL HAVE A REDUCED CAPACITY TO KEEP CONTROL OF THE
MOTORCYCLE IF THE BIKER REMOVES THE HANDS FROM THE HANDLEBAR DURING DRIVING.
IF YOU ATTEMPT TO CLEAN OR ADJUST THE HEADLIGHT FAIRING WHILST DRIVING THE
MOTORCYCLE YOU COULD LOSE CONTROL AND HAVE AN ACCIDENT
REMOVE ORIGINAL SCREWS
INSTALL BRACKETS
INSTALL HEADLIGHT FAIRING
WARNING: REMOVE THE FEEL PROTECTION FROM THE WINDSHIELD ONLY AFTER THE INSTALLATION
Attention : Excessive tightening of the M5X16 screws could compromise the integrity of the rubber nuts.
INSTALL STICKER
ATTENTION: BEFORE APPLYING THE STICKER CLEAN AND DEGREASE THE CONTACT SURFACE.
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding styles, such as full-finger gloves, boots, and body armor. Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire. Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>