LEDVANCE 4058075570917 Smart Plus WiFi Remote Control Installation Guide

: September 24, 2024
: LEDVANCE

Table of Contents

LEDVANCE 4058075570917 Smart Plus WiFi Remote Control
Specifications
FAQ
What In Box
Product Overview
App Instruction
Product Usage Instructions
PAIRING
GROUP SELECT
CHANGE SCENE
UNPAIRING & RESET
BATTERY CHECK
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LEDVANCE 4058075570917 Smart Plus WiFi Remote Control

Specifications

Product Name: SMART+ WIFI INSTALLATION REMOTE CONTROL
Model Number: SMHAeRrTe+
EAN: 4058075570917
Power Source: 2x AAA batteries (not included)
Color Temperature: 6500K to 2700K
Dimensions: 120mm x 41mm

Product Usage Instructions

Pairing and Group Selection:

To pair the remote control with your devices, follow these steps:

Ensure the remote is in pairing mode (PAIRING ON).
Select the desired group (A, B, or both A and B).
Press and hold the ON button for more than 5 seconds to complete pairing.

Changing Light Scenes:

To change light scenes using the remote control:

Select the desired scene button (1-5).
Press ON or OFF to activate or deactivate the scene.
You can also create custom scenes by following the instructions on the manual.

Battery Check and Replacement:

To check the battery status:

Press and hold the BATTERY CHECK button for more than 5 seconds.
The LED indicator will show the remaining battery life (6 months at 5 clicks per day).
If the battery needs replacement, open the battery compartment and replace with 2 new AAA batteries.

Customer Support:

If you need further assistance or have any questions, visit our customer support page at LEDVANCE Customer Support.

FAQ

Do you want to enable the RC ability?
- To enable the RC ability, select OK using the remote control.
How many devices can be connected?
- You can connect up to 15 devices, although this may vary based on your WiFi router settings.
Where can I find the EU Declaration of Conformity?
- The full text of the EU Declaration of conformity is available at this.link.

What In Box

Product Overview

App Instruction

Product Usage Instructions

PAIRING

GROUP SELECT

CHANGE SCENE

Set light scene
Select scene button
Save scene

UNPAIRING & RESET

BATTERY CHECK

CUSTOMER SUPPORT

https://www.ledvance.com/consumer/smart/faq/

Declaration

Hereby, LEDVANCE GmbH declares that the radio equipment type LEDVANCE SMART+ Device is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: smartplus.ledvance.com/declaration-of- conformity. Wireless radio used in WIFI lamps/ luminaires /components 2412–2484 MHz, max. RF output power 16dBm. Wireless radio used in Bluetooth lamps/ luminaires /components 2402–2480 MHz, max. RF output power 9.5dBm

Replacement of a battery with an incorrect type can defeat safeguard (for example, in the case of some lithium battery types). Altitude during operation: 2000 m.