U S GENERAL 58833-UPC 30 Inch 5 Drawer Owner’s Manual
- June 4, 2024
- U S GENERAL
Table of Contents
58833-UPC 30 Inch 5 Drawer
Owner’s Manual
56429 64030 64031 64061 64720 64721 64722 58833
Visit our website at: http://www.harborfreight.com
Email our technical support at:
productsupport@harborfreight.com
When unpacking, make sure that the product is intact and undamaged. If any
parts are missing or broken, please call
1-888-866-5797 as soon as possible.
All rights reserved.
WARNING
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
Total Combined Weight Capacity (Evenly distributed from bottom up.) | 700 lb |
---|
IMPORTANT SAFETY INFORMATION
Assembly Precautions
-
Assemble only according to these instructions.
Improper assembly can create hazards. -
Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
-
Keep the assembly area clean and well-lit.
-
Keep bystanders out of the area during assembly.
-
Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
-
Weight capacity and other product capabilities apply to properly and completely assembled products only.
-
Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cart.
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
-
DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
-
This product is not a toy or a toy chest.
Do not allow children to play with or near this item. -
Do not exceed 700 lb weight capacity, evenly distributed from bottom up.
Uneven loading causes tipping.
Be aware of dynamic loading!
The sudden load movement may briefly create excess load causing product failure. -
Do not open more than one Drawer at once.
The lid must be open for Drawers to be unlocked. -
Close and lock Drawers before moving.
-
Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cart.
Do not roll the Cart over concrete seams or other rough/uneven surfaces. -
Do not lift using the handle(s).
Do not lift while loaded. -
Lock Swivel Casters after moving.
-
Do not mount it on the truck bed or any other moving object.
-
Use as intended only.
-
Inspect before every use; do not use if parts are loose or damaged.
-
Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
-
Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cart.
-
Attach two Fixed Casters (10) to one side of the Bottom Shelf (8), using eight sets of Bolts (11), Washers (12), and Nuts (13).
-
Attach two Locking Swivel Casters (9) to the other side, using eight sets of Bolts (11), Washers (12), and Nuts (13).
-
Attach Posts (18) to the outside corners of the Bottom Shelf, using sixteen sets of Bolts (14) and Nuts (15).
Note: Make sure the bolt holes on the upper ends of Posts measure 1-3/8″ from the top and the lower holes measure 1″ from the bottom ends.
-
Attach Front/Back Cross Supports (6) to the inside of Posts using four sets of Bolts (14) and Nuts (15).
-
On the same side as Swivel Casters, attach Tray (16) to the outside, and a Side Cross Support (7) to the inside of Posts using two sets of Bolts (14) and Nuts (15).
-
On the other side, attach the remaining Side Cross Support to the inside of the Posts using two sets of Bolts (14) and Nuts (15).
CAUTION! The chest is heavy; do not attempt to lift and lower onto Cross Supports without assistance. -
With assistance, lift up the chest, then lower it carefully between the Posts until its bottom edges rest on the Cross Supports.
-
Attach Side Handle (17) to lower holes on the same side as Locking Swivel Casters, using two sets of Bolts (14) and Nuts (15).
-
Attach Lid Handle (21) using two Screws (22).
-
Place one Bracket (19) in each corner of the Chest. Attach Posts to the chest using fourteen sets of Bolts (14) and Nuts (15).
-
Attach Gas Struts (20) using four Nuts (13).
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before setting up or use of this product.
- Unlock Drawers and fill Cart evenly, from bottom to top. Do not exceed weight capacities.
- Close all Drawers and lock them.
- Unlock Swivel Casters.
- Roll the Cart to a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cart. Do not roll the Cart over concrete seams or other rough/uneven surfaces.
- Lock Swivel Casters.
Maintenance and Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
WARNING
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged, have the problem
corrected before further use.
-
PERIODICALLY, inspect the general condition of the Cart. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• brake operation,
• caster swivel function and movement,
• cracked or broken parts,
• any other condition that may affect its safe operation. -
Wipe the external surfaces of the Cart with a clean cloth.
-
Lubricate Drawer Slides as needed.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND
TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT,
OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT,
THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATE THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND
NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS
OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List and Diagram
Parts List
Part | Description | Qty |
---|---|---|
1 | Lid | 1 |
2 | Chest | 1 |
3a | Top Left Drawer | 2 |
3b | Top Right Drawer | 1 |
3c | Middle Drawer | 1 |
3d | Bottom Drawer | 1 |
4 | Drawer Slide | 10 |
5 | Rail | 10 |
6 | Front/Back Cross Support | 2 |
7 | Side Cross Support | 2 |
8 | Bottom Shelf | 1 |
9 | Locking Swivel Caster | 2 |
10 | Fixed Caster | 2 |
11 | Caster Bolt (M8x20) | 16 |
12 | Washer (Ø8) | 16 |
13 | Nut (M8) | 20 |
14 | Bolt (M8x16) | 40 |
15 | Nut (M8) | 40 |
16 | Tray | 1 |
17 | Side Handle | 1 |
18 | Post | 4 |
19 | Bracket | 4 |
20 | Gas Strut | 2 |
21 | Lid Handle | 1 |
22 | Screw (M4x6) | 2 |
Record Serial Number Here:
Note: If the product has no serial number, record the month and year of
purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and
are not available individually as replacement parts. Parts may not be
interchangeable. Specify UPC number when ordering:
White: (56429) 792363564298
Black: (64030) 792363640305
Blue: (64031) 792363640312
Red: (64061) 792363640619| Yellow: (64720) 792363647205
Green: (64721) 792363647212
Orange: (64722) 792363647229
Gray: (58833) 193175469922
---|---
Assembly Diagram
Limited 90-Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser
that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear, and tear, or to lack of maintenance. We shall in no
event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our
product. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the
product at our election or we may elect to refund the purchase price if we
cannot readily and quickly provide you with a replacement. We will return
repaired products at our expense, but if we determine there is no defect, or
that the defect resulted from causes not within the scope of our warranty,
then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>