U S GENERAL 56235-UPC 792363562355 Single Bank Roller Cabinet Owner’s Manual

U S GENERAL 56235-UPC 792363562355 Single Bank Roller Cabinet

Product Information

The product is a cabinet with a total combined weight capacity of 1000 lb when evenly distributed from bottom up. The product comes with an owner’s manual and safety instructions. Tools required for assembly and service may not be included. The product is not a toy nor a toy chest. It is important to keep children away from the product.

Product Usage Instructions

1. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
2. Assemble only according to the instructions provided in the manual. Improper assembly can create hazards.
3. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
4. Keep the assembly area clean and well lit.
5. Keep bystanders out of the area during assembly.
6. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
7. Assemble on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded cabinet.
8. Do not exceed weight capacities, evenly distributed from bottom up. Sudden load movement may briefly create excess load causing product failure.
9. Do not open more than one drawer at once.
10. Empty, close, and lock Drawers before moving.
11. Use only on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded Cabinet. Do not roll Cabinet over concrete seams or other rough/uneven surfaces.
12. Do not mount on a truck bed or any other moving object.
13. Inspect before every use; do not use if parts are loose or damaged.
14. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

It is important to read the entire IMPORTANT SAFETY INFORMATION section at the beginning of the manual, including all text under subheadings before set up or use of this product. Once the product is assembled, locate the keys, label them, and put them in a safe place.

Specifications

• Total Combined Weight Capacity (Evenly distributed from bottom up.): 1000 lb

IMPORTANT SAFETY INFORMATION

Assembly Precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply to properly and completely assembled product only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet.

Use Precautions

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
2. This product is not a toy nor a toy chest. Do not allow children to play with or near this item.
3. Do not exceed weight capacities, evenly distributed from bottom up. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
4. Do not open more than one Drawer at once.
5. Empty, close, and lock Drawers before moving.
6. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet. Do not roll Cabinet over concrete seamsor other rough/uneven surfaces.
7. Do not lift using handle(s). Do not move or lift while loaded.
8. Lock Swivel Casters after moving.
9. Do not mount on truck bed or any other moving object.
10. Use as intended only.
11. Inspect before every use; do not use if parts are loose or damaged.
12. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Assembly Instructions

warning: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.

1. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet.

2. Locate the Keys, label them, then put them in a safe place.
   Note: The Bottom Cabinet and Top Chest have different sets of keys.

3. Attach Side Handle (2) to either side of Cabinet using two Handle Screws (3).

4. Attach two Locking Swivel Casters (9) to the same side as Handle using eight Caster Screw Sets (10).

5. Attach two Fixed Casters (8) to the other side using eight Caster Screw Sets (10).

6. Lock the Casters by depressing the brake levers.

Operation Instructions

warning: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.

1. Empty all Drawers.
2. Close all Drawers and lock them.
3. Unlock Swivel Casters.
4. Roll Cabinet to a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet. Do not roll Cabinet over concrete seams or other rough/uneven surfaces.
5. Lock Swivel Casters.
6. Unlock Drawers and fill Cabinet evenly, from bottom to top. Do not exceed weight capacities.

Maintenance and Servicing

warning: Procedures not specifically explained in this document must be performed only by a qualified technician.

warning: TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use.

1. PERIODICALLY, inspect the general condition of the Cabinet. Check for:
   • loose hardware,
   • misalignment or binding of moving parts,
   • brake operation,
   • caster swivel function and movement,
   • cracked or broken parts,
   • any other condition that may affect its safe operation.
2. Wipe external surfaces of the Cabinet with clean cloth.
3. Lubricate Drawer Slides as needed.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Parts List and Diagram

Parts List

| | | | | |
---|---|---|---|---|---|---
Part| Description| Qty| | Part| Description| Qty
1| Top Shelf Liner| 1| 11| Lock| 1
2| Side Handle| 1| 12| Key (not shown)| 3
3| Handle Screw (M6x55)| 2| 13| Cotter Pin| 1
4| Drawer Label and Cover| 8| 14| Lock Bar| 1
5| Drawer Trim| 8| 15| End Cap| 16
6| Drawer Slide| 16| A| Drawer| 3
7| Drawer Liner| 8| B| Drawer| 2
8| Fixed Caster| 2| C| Drawer| 1
9| Locking Swivel Caster| 2| D| Drawer| 2
10| Caster Screw Set (M8x25)| 16|

Record Serial Number Here:
Note: If the product has no serial number, record month and year of purchase instead.
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts may not be interchangeable. Specify UPC number when ordering:

• Yellow: 792363562331
• Green: 792363562348
• Orange: 792363562355

Diagram

Assembly Diagram

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

If you have any technical questions or concerns, please call 1-888-866-5797 or visit the website at: http://www.harborfreight.com.
Email technical support at: productsupport@harborfreight.com

• For technical questions, please call: 1-888-866-5797.
• Item: 56233 56234 56235
• 26677 Agoura Road Calabasas, CA 91302
• 1-888-866-5797

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>