MIBOXER TR -C1 AC Triac Dimmer 2.4G Plus Push Instruction Manual

: September 23, 2024
: MiBOXER

Table of Contents

MIBOXER TR -C1 AC Triac Dimmer 2.4G Plus Push
Product Usage Instructions
Feature
Parameter
Connection Diagram
Installation Diagram
PUSH Dimming
Remote control instruction 6.1. Link remote
Attention
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

MIBOXER TR -C1 AC Triac Dimmer 2.4G Plus Push

Specifications:

Model No.: TR-C1
Input: AC100~240V
Compatible with Triac dimming LED light, Filament lamps, and Halogen lamps
Supports up to 25 dimmers connected to the same self-return switch
Connection cable of self-return switch should not exceed 20m
Junction box depth requirement: over 50mm

Product Usage Instructions

Connection:
Ensure correct cable connection (N, L) before turning on the dimmer to prevent damage.

Breaker Mode:

To activate or shut down breaker mode:

Turn On: Short press SET 5 times quickly, indicator blinks 3 times quickly.
Turn Off: Short press SET 5 times quickly, indicator flashes 3 times slowly.

PUSH Dimming:
Short press PUSH switch to turn ON/OFF light. Long press for stepless dimming brightness.

Remote Control Instruction:

Linking Remote:

For K1 remote:

Learning code: Press SET 3 times within 3 seconds.
For other remotes: Press any button in group zones 3 times within 3 seconds.

Unlinking with Remote:
Long press SET key for 3 seconds to unlink with the remote.

Compatible Remote:
Compatible remotes (purchase separately): B1/B1-B, T1, K1/K1-B,
FUT087/FUT087-B, S1-B/S1-W/S1-G, WL-Box1

Setting Min Brightness with Remote:
This function should be paired with the remote first before setting. For K1 remote: Long press SET for 3 seconds until the light flashes once to set up different brightness levels. For other remotes: Long press the button on the remote or zone until the light flashes once, then set up 10 different brightness levels.

Frequently Asked Questions (FAQ):

Q: How many dimmers can be connected to the same self-return switch?
A: Up to 25 dimmers can be connected to the same self-return switch.
Q: What is the procedure to unlink the dimmer from a remote control?
A: Long press the SET key for 3 seconds to unlink with the remote control.

Mi •Light
Subordinate New Brand

AC Triac Dimmer (2.4G + Push)
Model No.: TR˜-C1

Feature

Don’t need signal cable and change original wire layout, it’s very simple to install it with low cost. Mini appearance can ﬁt for EU/USA standard junction box. Wide application for single color triac LED lights, ﬁlament lamps, Halogen lamps.

Smartphone APP control (need to buy 2.4GHz gateway)
2.4G RF wireless remote control
Push dimming function
Trailing edge phase-cut technology
0~100% stepless dimming and ﬂicker free
Lowest brightness setting function
Built-in temperature detecting switch, over heart /loading protection
Auto transmitting function, unlimited control distance
Screw connector is reliable and easy to do installation
Anti-ﬁre PC shell is more safety

Parameter

Model No.: TRI-C1
Input Voltage: 100-240V~ 50/60Hz Output Voltage: 100-240V~
Output Current: Max 1.36A
Output Power: 150W @110V; 300W @220V Dim Method: RF wireless dimming
Working Temperature: -10~40°C

Control Distance : 30m

Connection Diagram

Attention

Please check and ensure that all cables hadone correct connection before turn on it, otherwise, the dimmer is easy to be damaged.

“Breaker mode” is activated or shut down
Attention: It only support to turn on/oﬀ light, user can not dim device once this mode is activated

Turn On: short press “SET” 5 times quickly, mode had activated once indicator blink 3 times quickly
Turn Oﬀ: short press “SET” 5 times quickly, mode had shut down once indicator ﬂash 3 times slowly

Installation Diagram

Support following standing junction box

PUSH Dimming

Short press PUSH switch:
Turn ON/OFF light

Long press PUSH switch:

Stepless dimming brightness.
Long press and release your ﬁnger, then repeat long pressing to increase or decrease brightness
Please long press switch 20 seconds until all lights have same brightness with 100% level if multi dimmers had connect with same self-return switch. The quantity of dimmers which connect with same self-return switch can not be over 25 pieces, the connection cable of self-return switch can not be over 20m.

Remote control instruction 6.1. Link remote

For K1 remote

Learning code
- Way 1: short press “SET” one time, Indicator breathes
- Way 2: power oﬀ dimmer 10 seconds and power on again
- Way 3: short press Push switch (ON – OFF)
Press “SET” 3 times within 3 seconds, linking code is done once the light ﬂashes 3 times slowly

For other remote

Learning code
Press “ ” any “ ” button in group zones 3 times within 3 seconds, linking code is done once the light ﬂashes 3 times slowly

Unlink with remote
Long press the “SET” key for 3 seconds, the indicator will ﬂash 10 times quickly, code cleared successfully.

For K1 remote

Learning code
Press “SET” 5 times within 3 seconds,unlinking is done once the light ﬂashes 10 times quickly

For other remote

Learning code
Press “ ” any “ ” button in group zones 5 times within 3 seconds, unlinking is done once the light ﬂashes 10 times quickly

Compatible remote (purchase separately)

Set up min brightness with remote

This function should be paired with remote ﬁrstly before setting.

For K1 remote

Long press “SET” 3 seconds until the light ﬂashes one time, indicator is going into ﬂashing status
Short press “SET” to get 10 kinds of brightness: 3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%
Short press rotating button to conﬁrm setting or waiting for 10 seconds to be conﬁrmed automatically, the light will recover brightness to previous level.

For other remote

Long press the “ ” button on the remote or ” ” button on the zone, until the light ﬂashes one time, indicator is going into ﬂashing status
Short press the “ ” button on the remote or “ ” button on the zone to set up 10 diﬀerent brightness (3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%)

Short press any button except “OFF” to conﬁrm setting or waiting for 10 seconds to be conﬁrmed automatically, the light will recover brightness to previous level
Attention : Master OFF button can set up lowest brightness for all connected dimmer

Auto transmitting
One light can transmit the signals from the remote control to another light within 30m, as long as there is a light within 30m, the remote control distance can be limitless.

Attention: All dimmers must link with same remote

Attention

Please turn oﬀ power supply before installation.
Please ensure input voltage to be same as requirements from device.
Don’t disassemble device if you are not expert, otherwise, it will damage it.
Please do not use the light in the place with widely range metal area or strong electromagnetic waves nearby, otherwise, the remote distance will be seriously aﬀected.

Made in China

Documents / Resources

| MIBOXER TR -C1 AC Triac Dimmer 2.4G Plus Push [pdf] Instruction Manual
TR -C1, TR -C1 AC Triac Dimmer 2.4G Plus Push, TR -C1, AC Triac Dimmer 2.4G Plus Push, Triac Dimmer 2.4G Plus Push, Dimmer 2.4G Plus Push, 2.4G Plus Push, Plus Push, Push
---|---