M-ELEC ML-C20-1830-M Down Lights Owner’s Manual

: September 23, 2024
: M-ELEC

Table of Contents

M-ELEC ML-C20-1830-M Down Lights
Product Usage Instructions
Product information
TECHNICAL INFORMATION
INSTALLATION GUIDE (RECESSED)
INSTALLATION GUIDE (SURFACE MOUNT)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

M-ELEC ML-C20-1830-M Down Lights

Specifications

Model: C-Series Downlights
Wattage Options: 13W, 25W, 30W
Luminous Efficiency: Remarkable
Design: Sleek with concave front
Optics: Reflector and lens optic fusion
UGR: Available

Product Usage Instructions

Installation

Ensure the power source is switched off before installation.
Mount the downlight securely on the ceiling using the provided mounting hardware.
Connect the wiring following the manufacturer’s instructions.
Turn on the power to test the downlight.

Adjustment
To adjust the direction of the light beam, gently rotate the downlight housing while ensuring it is securely fastened to the ceiling.

Maintenance
Regularly clean the downlight using a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive materials that may damage the finish.

FAQ

Q: Can I use higher wattage bulbs with the downlight?
A: It is recommended to only use bulbs within the specified wattage range to prevent overheating and ensure optimalperformance.
Q: Are these downlights suitable for outdoor use?
A: No, these downlights are designed for indoor use only. Using them outdoors may lead to damage due to exposure to weather elements.

C-SERIES
Commerical Downlights

C-Series Downlights
13W, 25W & 30W

Product information

The Commercial Series downlights boast remarkable luminous efficiency and sleek design. Featuring a concave front, reflector and lens optic fusion, and UGR <19, to reduce glare for pleasant ambiance. With adaptable mounting options and adjustable CCT (3000K, 4000K, 5700K), they suit various spaces like offices, schools, and hotels.

TECHNICAL INFORMATION

	ML-C12-0613-M	ML-C16-1325-M
Total Power	6-13W (6W / 8W / 10W / 13W)*	13-25W (13W / 16W / 18W / 20W
/ 25W)	18-30W (18W / 20W / 22W / 25W / 30W)
Lumen Output	(Max wattage) 13W:

WW 1400lm | NW 1550lm | W 1550lm

| (Max wattage) 25W:

WW 2750lm | NW 3100lm | W 3000lm

| (Max wattage) 30W:

WW 3650lm | NW 3900lm | W 3900lm

WW 153lm/W | NW 130lm/W | W 125lm/W

| (Max wattage):

WW 115lm/W | NW 135lm/W | W 130lm/W

| (Max wattage):

WW 125lm/W | NW 140lm/W | W 135lm/W

Total power consumed including driver | Average life is calculated on expected average lifespan | Total depth measured from front of mounting surface to top of downlight

T. 1300 222 445 | www.melec.com.au
For further information about our Warranties please go to: melec.com.au/legal/warranties

INSTALLATION GUIDE (RECESSED)

Before commencing installation or maintenance, ensure electricity is switched off at the mains.
Remove existing downlight and disconnect old transformer OR for new installations mark and cut out a hole in ceiling (118mm for C12, 158mm for C16, 199mm for C20).
Set the desired power output with the “selector switch” on the back of the driver.
Connect the driver plug into a plug base.
Connect the fitting to the driver and set the desired colour output on the CCT switch.
Carefully bend spring clips upwards and install new LED downlight

INSTALLATION GUIDE (SURFACE MOUNT)

Before commencing installation or maintenance, ensure electricity is switched off at the mains.
Remove the spring clips on the fitting and attach the fixing plate.
Feed your input wire through the center hole of the ceiling mount kit, and affix onto your installation surface with approproate fixing methods.
If you are running conduit into the ceiling mount kit, remove the side knockouts.
Connect the driver plug into a plug base.
Set the desired power output with the “selector switch” on the back of the driver.
Connect the fitting to the driver and set the desired colour output on the CCT switch.
Secure the safety wire and clip onto the fixing plate.
Install the downlight with the fixing plate into the ceiling mount kit until an audible click is heard, indicating that the downlight is properly secured.

WARNINGS

Electrical equipment/work shall be performed by Qualified Tradespeople.
If components are damaged, it shall be replaced by Qualified Tradespeople to avoid and Hazards.

Insulation Distance: Refer to AS3000

HCB (Height clearance to building element) Minimum distance as specified by the luminaire manufacturer between the top of the luminaire and any building element above it.
MIC (Minimum insulation clearance) Minimum distance as specified by the luminaire manufacturer between the top of the recessed luminaire and the building insulation above it.
SCB (Side clearance to building element) Minimum distance between the side of the recessed luminaire and any building element as specified in AS/NZS 3000, or as specified by the luminaire manufacturer.
SCI (Side clearance to insulation) Minimum distance as specified by the luminaire manufacturer between the recessed luminaire and any building insulation.
SCG (Side clearance to auxiliary equipment (control gear (CG))

NOTE: The LED driver Must sit on top of insulation and MUST NOT be covered.

IC-4
RISK OF FIRE – Required clearance from structural members and building elements.
SCB =0mm MIC=0mm SCI=0mm HCB =0mm SCG=50mm

WARNING – RISK OF OVERHEATING OR FIRE IF CLEARANCE DISTANCES ARE AHEARED TO.

At M-Elec our goal is to not to just supply electricians with the best products but the best services as well. That’s why we’ve partnerred with Sparkys United. Be part of the electrical community today.
Register for free now sparkysunited.com.au/warranty

Free onsite warranty for 3 years.
Includes labour & hire.
In conjunction with your standard product warranty.
We’ve got your back!