GOODVIEW GM65M2 Digital Display User Manual

: June 17, 2024
: Goodview

GM65M2 Digital Display

Product Information

Specifications

Model: GM** M2
Display: Digital Display
Smart TV Solution: MStar latest highly integrated smart TV
solution MSD6A648WY
Functions:
- Support HDMI1/HDMI2/OPS IN and audio out
- Pre-installed content publishing system for terminal management
  and program publishing
- Support horizontal and portrait display
- Wireless screencast
External Ports:
- LAN
- RS232
- HDMI-1
- HDMI-2
- Audio Out
- TF Card for external storage
- USB 2.0 (data input or system upgrading)
- USB 2.0 (data input or system upgrading)

Product Usage Instructions

Installation

Machine Unboxing

Due to the large size and heavy weight, we suggest at least two
people in handling. Since the display panel is fragile and easily
scratched, please handle it gently. Do not place the product face
down without a protective pad. After unpacking, check that the
carton contains the following items:

Installation Guide

The product supports both wall mount and bracket mount. The
manufacturer shall not be liable for installation by
non-professionals. To avoid shortening the service life of
electronic components, do not install in a humid environment such
as kitchen, bathroom, etc. Please save the packing cases for future
transportation.

Bracket Mount

Color: Black
Material: Engineering plastic plate + cold rolled steel
plate
Size: 40-80 inch
Pallet bearing: 11.4KG
Load-bearing: 90KG
Lift range: 1390-1660 (mm)
Bracket Diagram 1 (Note: Horizontal*Vertical)

Wall Mount

Operation Guide

Power On

Remote Control

Android System Guide

Launcher Home Page

Boot up to enter the home page, where screencast, more, GTV,
File, Signal resources, and Welcome icon can be found here.
Meanwhile, the date and time, weather, and other info are
displayed.

Screencast

Select screencast to enter the screencast setting page, where
you may find the connection guide.

Click the icon on the upper right corner of the page to set the
device name and password. Multi-screen split is supported, with up
to 8 screens to choose from.

Signal Resource

Select the signal resource and a menu will pop up. Change the
channel by pressing the Up and Down button on the remote control.
Select HDMI 1 to switch to HD channel.

GTV Guide

Select GTV to enter into the GTV main interface.

File Management

More

The pre-installed applications and manually installed
third-party Apps are displayed on this page. Click any App in the
interface to use it.

FAQ

Q: What functions does the digital display support?

A: The digital display supports HDMI1/HDMI2/OPS IN and audio
out, pre-installed content publishing system for terminal
management and program publishing, support for horizontal and
portrait display, and wireless screencast.

Q: Can I install the product in a humid environment?

A: No, to avoid shortening the service life of electronic
components, do not install the product in a humid environment such
as a kitchen or bathroom.

Q: What is the lift range for bracket mounting?

A: The lift range for bracket mounting is 1390-1660mm.

User Manual
Digital Display
GM** M2
1

Content ………………………………………………………………………………………………………………………….01 I. Brief Introduction……………………………………………………………………………………………………02 1.1. Product Introduction ………………………………………………………………………………………………02 1.2. Product Structure……………………………………………………………………………………………………02 IIInstallation ……………………………………………………………………………………………………………… 03 2.1. Machine Unboxing ………………………………………………………………………………………………….03 2.2. Installation Guide……………………………………………………………………………………………………04 2.2.1. Bracket Mount……………………………………………………………………………………………………..04 2.2.2. Wall Mount ………………………………………………………………………………………………………….05 III. Operation Guide ……………………………………………………………………………………………………..05 3.1. Power On ………………………………………………………………………………………………………………..05 3.2. Remote Control……………………………………………………………………………………………………….06 IV. Android System……………………………………………………………………………………………………….06 4.1. Launcher Home Page ……………………………………………………………………………………………..06 4.2. Wireless Screencast…………………………………………………………………………………………………06 4.3. Signal Source…………………………………………………………………………………………………………..07 4.4. GTV Guide ……………………………………………………………………………………………………………..07 4.5. File Management …………………………………………………………………………………………………….08 4.6. More………………………………………………………………………………………………………………………..08 4.7. System Settings ……………………………………………………………………………………………………….08 4.8. Menu Settings………………………………………………………………………………………………………….12
V. Content Publishing OSD Menu Introduction……………………………………………………………15 5.1. Fundamental Settings ……………………………………………………………………………………………..15 5.2. Premium Settings ……………………………………………………………………………………………………18 5.3. Broadcast Program on Single Mode ……………………………………………………………………….26
VI. Service Policy…………………………………………………………………………………………………………..27

Safety Instructions
In order to ensure the reliable use of the equipment and the safety of personnel, please comply with the following during installation, use and maintenance: System grounding: The system must have perfect grounding. Otherwise, not only signal interference, instability or mechanical damage, but also personal accidents may be caused by leakage. >It is prohibited to change or add any parts to the mechanical and electrical design of this product. Otherwise, the manufacturer is not responsible for the harmful results. >Do not use two-core plug to ensure that the input power supply of the equipment is AC100-240V 50/60Hz. >There are 220V high voltage components in the machine. Do not open the housing without authorization to avoid the danger of electric shock. Do not place the system equipment in an overcooled or overheated place.

I. Brief Introduction
1.1. Product Introduction
Digital signage, adopt MStar latest highly integrated smart TV solution MSD6A648WY, support the following functions: 1. Support HDMI1/HDMI2/OPS IN and audio out 2. Pre-installed content publishing system, can be used for terminal management and program publishing 3. Support horizontal and portrait display 4. Wireless screencast
1.2. Product Structure
Schematic drawing and external port: GM65M2

Front View

Side View

(Back view)

1. LAN 2. RS232 3. HDMI-1 4. HDMI-2 5. Audio Out 6. TF Card for external storage 7. USB 2.0 (data input or system upgrading) 8. USB 2.0 (data input or system upgrading)

II. Installation 2.1. Machine unboxing
Due to the large size and heavy weight, we suggest at least two people in handling. Since the display panel is fragile and easily scratched, please handle it gently. Do not place the product face down without a protective pad. After unpacking, check that the carton contains the following items:

2.2. Installation Guide
The product supports both wall mount and bracket mount. The manufacturer shall not be liable for installation by non-professionals. To avoid shortening the service life of electronic components, do not install in a humid environment such as kitchen, bathroom, and etc. Please save the packing cases for future transportation.
2.2.1. Bracket Mount
The movable bracket can be adjusted and lifted from 1390mm to 1660mm, which can meet the viewing needs from different heights. The universal rotation wheel, which can rotate the bracket back and forth, left and right, flexible for push and pull, safe to lock and easy to install. Integrated base, cable function, standard equipped with audio-visual tray bracket, can be used to place other audio-visual equipment such as set-top box and notebook. Steel column plate design and integrated base ensure a high safety and stability, horizontal 700mm *vertical 500mm large hole spacing, 90kg strong load bearing, can mount 40-80 inch display.

Color Material

Black
Engineering plastic plate + cold rolled steel plate

Size Pallet bearing

40-80 inch 11.4KG

Load-bearing

90KG

Lift range

1390-1660 (mm)

200x200300x300400x200400x300400x400600x400700x400700x500 (Notes: Horizontal*Vertical)

Bracket Diagram 1

2.2.2. Wall Mount
The installation environment needs to be checked in advance due to the heavyweight. The wall should bear more than 200kg. If the machine is mounted on the wooden wall, please ensure that the thickness at least 2cm, the load- bearing should over 200kg. Please follow the hole spacing of the product to install, and keep a certain distance between the product and wall for good ventilation. Please prepare 4 M8 bolts (with a screw length of 50mm) and tighten the bolts. Before installation, please consult a professional or technical for guidance. (The diagram below is the bracket for GM65S4).
III. Operation Guide
This chapter is mainly about GM**S4 operation guide including power switch, front interface, dual system switch, toolbar, network connection and settings, touch operation, screen projection, file saving, etc.
3.1 Power on
The conference LCD display has an AC IN power connector on the machine back. Please ensure that the machine power connector is connected to the appropriate power source. Please confirm that the power cord used matches with the power outlet voltage, is certified and meets the safety regulations of the country. The front button of the machine is the power switch. It will turn red when the machine is powered and turn to blue when the machine starts. Two USB ports on the front support for external terminal connection.

3.2. Remote control
IV. Android System Guide 4.1. Launcher Home Page
Boot up to enter the home page, where screencast, more, GTV, File, Signal resources, and Welcome icon can be find here. Meanwhile, the date and time, whether, and other info are displayed.
4.2. Screencast
Select screencast to enter the screencast setting page, you may find the connection guide here.

Click the icon on the upper right corner of the page to set the device name and password. Multi-screen split, up to 8 screens can be chosen from.
4.3. Signal Resource
Select the signal resource and the menu will pop up. Change the channel by pressing the “Up” and “Down” button on remote control. Select HDMI 1 to switch to HD channel.
4.4. GTV Guide
Select GTV to enter into the GTV main interface.

4.5 File Management
Select file management and automatically jump to the file management page, where the built-in storage is displayed. The SD card and U disk will be displayed if have been inserted, the function is as follows: 1. Multiple select, copy, cut, paste and delete the files inside; 2. Files can be transferred between different storage. For example, files in the usb flash drive can be copied into the memory, and files in the built-in storage can be copied into the U disk; 3. Double-click the video file to play it; 4. Double- click the apk file to install.
4.6 More
The pre-installed application and manually installed third-party Apps are displayed in the page. Click any App in the interface and you can use it.
4.7. System Settings

4.7.1. Wi-Fi Settings
When Wi-Fi is enabled in this interface, nearby WiFi signals will be displayed. Select one to connect, then “Connected” will be shown.
4.7.2. LAN Settings
In this page, there are automatic IP and static IP, the system automatically gets the IP address by default.
Select static IP, insert the network cable, need to manually set the IP address, gateway, subnet mask and DNS1, DNS2 can not be set. DSN1 Settings and gateway should keep consistent Click ok after setting finished, the set IP information can be viewed in the system Settings -> about all-inone machine -> status information bar.

4.7.3. Portable hot spot settings The hotspot is turned on by default to create a separate LAN environment for wireless projection. If the local wifi would connect to the external network, external devices can also connect by hot spot.
In the open state, select to set WLAN hot spot, hot spot name and password can be changed in the pop-up page.
4.7.4 Display Settings In this interface can be set wallpaper, font size, and navigation bar and other functions.

Navigation bar Settings Select the navigation bar and pop up the option of “on” or “off”. It is “off” by default. When it is in the closed state, you cannot change the navigation toolbar, only in “on” mode to enable the toolbar.
Return: Skip to the previous step Home page: Return to the launcher interface Task: Display all the previously opened Windows (apps running in the background). Slide to right or left or click X to delete the process. Source: Click on display signal source page Menu: The menu setting interface will pop up after clicking Volume: Click and pop up the volume bar, slide from left to right, the volume value is increasing, slide from right to left, the volume value is decreasing Brightness: Click and pop up the brightness bar, slide from left to right, the brightness is getting brighter, slide from right to left, the brightness is getting darker Screenshot: click to capture the current screen in PNG format and save it in screenshot folder under picture folder.

4.7.5 Date and Time
In this interface, you can turn on or off the automatic date and time settings. Select on, and automatically synchronize the network time without manual setting. It is enabled by default.

Select “off” to set date and time.

The default is Chinese standard +8:00. Click to set time zone for setting. After selecting a specific time zone, the time will change with it.
4.7.6 Display direction
Direction setting: the display direction of the screen can be set to horizontal and vertical display, provides four modes of 0°/90°/180°/270°. 0° and 180° are horizontal display that show opposite directions, while 90° and 270 are portrait display show opposite directions.
4.8. Menu Settings
Press the “menu” on the remote control to pop up the menu setting interface.
Brightness adjustment: From right to left, the brightness is getting darker Volume adjustment: The volume is getting lower from right to left.

Boot channel: provide HD 1/ HD 2/ OPS/Android/Memory 5 channels for selection, default by android channel. Hd 1/ HD 2/ OPS/Android: no matter what channel it is in before shutdown, every boot will enter HD 1/ HD 2/ built-in PC/Android channel by default Memory channel: no matter in what channel before shutdown, every boot will enter the former shutdown channel by default. Theme: you can change the background images, choose from the inner image storage for launcher interface background and more background images.
Select recent to choose the images from U disk or SD card.
Intelligent identification button: If turned off, connect external HDMI signal will not automatically switch to HDMI channel display, select open, connect external HDMI signal will automatically switch to HDMI channel display. Time: the network update time, change date and change time are displayed in this interface. Network update time: When connect to the network, the machine will automatically synchronize the network time, that of no need to manually change, and the update date and update time turns gray, When the date and time are displayed incorrectly, you need to change the time manually. Change date: when the date appears incorrectly, you can change the date in this page.

Update the time: When the time appears incorrectly, you can change the date in this page.
System: Here you can set timer switch, time display and restores factory settings. Timer switch: Timer switch can be set in this page. The setting logic is startup time < shutdown time. If the startup time is set as 09:00, shutdown time is set as 18:00. Off: Switch to power on/off manually Select only once: set the timer switch only execute once. Select every day: set the timer switch for daily execution.

Menu display time: provide closing /10s/30s/60s/120s parameters for selection 10s/30s/60s/120s:T he menu page will automatically hide after displaying 10s/30s/60s/120s. Off: indicates that the menu page is always displayed, and it is necessary to manually press the back button to exit the menu page.
V. GTV OSD Menu Introduction
Start up the machine and enter the GTV interface by default. The page displays the current playing state, working mode, time and date, apk version, firmware version, local storage, etc. The default is stand-alone mode shown as follows:
Press the “Menu” on remote control to enter OSD menu, in this interface shows basic settings by default and premium settings.
5.1. Basic Settings 5.1.1. Screen rotation
Screen display can be set on this page. When it is set to 0°, the screen is displayed horizontally; when it is set to 90°, the screen is displayed vertically; 180 ° and 0° are displayed in contrast; 90° and 270° are displayed in contrast; from 0° to 270°, the display direction is rotated counterclockwise. The diagram below:

5.1.2 Work Mode
In this page, there are three working modes to choose from: Single mode: The program can only be imported through the U disk for playback; LAN/Wi-Fi: The program can be released through the background server and the terminal can be controlled remotely
5.1.3 Server Configuration
Only in the LAN and WiFi working mode can be set, the server setting option in the stand-alone mode is grey, that can not be changed. In the LAN and Wi-Fi working mode, connect the server through IP mode or domain name mode(default).
IP mode: select the server address to enter the edit page, where the server address can be set; Select the server port to enter the port editing page and set the port number in the interface.

The domain name mode: Select domain name to call the server address interface to set.
5.1.4 Date and Time
Set the date and time in the page, in stand-alone mode, the Startup Sync Time Setting and Sync Time Now can not be set. Only in LAN and WiFi mode can be set up. Call the date setting interface by pressing the up and down narrow buttons on the remote control.
5.1.5 System Settings
IP information is displayed on this page. It is enabled by default. IP information and server information are displayed in the local IP bar of the main interface of apk. When turns off, IP address will be hidden automatically.

5.2 Senior Settings 5.2.1 Resolution
1920*1080
5.2.2 Real Time Clock
Terminal interface can display the current time, here can set the display position of the real-time clock. Up Left/Right – displays the clock in the top left / right corner on the screen. Bottom Left/Right – displays the clock in the bottom left / right corner on the screen. Off – turns off this feature and do not display clock on the screen.
5.2.3. Display Language Four languages to choose from in this interface, Chinese(default), English, Japanese and polski.

5.2.4 Play Mode This menu is only available when the player works in single mode. Three playback modes are supported when players work in stand-alone mode. ¡ Open – Media files, such as images and videos, stored in the root directory of a USB disk can be played and content packing is not required. ¡ Encrypt – Only encrypted content packages, created by such tool as ADPE, with the same password as the player can be played. The player password file ADPKeyRenew.BIN can be created and imported together with the content package by such tool as ADPE, and the initial password is 12345678 by default. ¡ No Encrypt – Only content packages without password, created by such tool as ADPE, can be played.
5.2.5. Play Time When the player works in Open play mode, you can setup the playback duration for each image to be played, which will not apply to other play modes.

5.2.6 Native ID setting The local ID is the terminal number. Under the network condition only for viewing, not editing.When the terminal works in stand-alone mode, the local ID can be set.
5.2.7 Play Log Press to turn on this feature to keep a log of playback and report it to the management platform, or playback will not be logged. 5.2.8 USB This menu allows you to enable or disable the USB port. Press to disable or enable the USB port for external USB device connection. 5.2.9 Scroll Text Roll text Setting allows you to turn on or off the feature of scroll text. Off – scroll text, no matter included or not in the playlist, will not appear on the screen. On – scroll text, if included in the playlist, will be displayed on the screen. 5.2.10 Touch Aid Closed by default. When turned on, the icon appears on the upper left corner of the APK main interface. You can also call the touch aids by clicking left twice in the upper left and lower left corners of the APK main interface.

Settings: Automatically enter the OSD menu interface after clicking “settings”.

Exit: Click the “exit” to exit the interface and enter the Android system.

Play: Play the program automatically after clicking “playback” (provided the terminal has

imported the program).

Hidden: After clicking “Hidden”, the touch assist tool icon will automatically hidden and does

not display.

5.2.11 Auto Start If you enable this feature, the pre-loaded Signway digital signage player software will start automatically after the player is turned on. Otherwise, Android system will be loaded instead.
5.2.12 Sync Settings Terminal support synchronization function, multiple terminals can synchronize broadcast programs. The synchronization function can be set up here. The following conditions must be met for the implementation of the synchronization function: 1. Set one of the machines as the host and the rest as the slave. 2. The master and slave must be on the same LAN. 3. The master-slave machine imports the same program. 4. The master and slave must set the same synchronization group number and synchronization mode.

Sync setting: Turn sync on or off. Sync Role: Host: When using the synchronization function, the current terminal is set as the host, and other slaves will play the same or different programs simultaneously with the host. Only one host can exist in the same area. Slave: Automatically play programs in sync with the host. Sync Group: Can be set to 0~255. Sync Mode: 0: The host sends a sync signal at the beginning of each clip. 1: The host sends a sync signal every minute. (The host sends a sync signal, which is sent only when the video starts playing, and will not be sent during the video playback) 999: In the test mode of 0, the slave will have an arrow synchronization flag in the upper left corner after receiving the sync
5.2.13 Storage Internal Storage – only the programs stored in the built-in memory will be played. USB – only the programs stored in the USB disk will be played.

5.2.14. Restore to Factory Settings Press Restore to Factory Settings and you’ll be prompted with a message. Choose Yes to have all parameters in System Settings to be restored to their factory settings. 5.2.15 Timer power on/off Week Setting – This mode will have the player turned on/off automatically at your specified time on each day of every week. Uniform Setting – This mode will have the player turned on/off automatically at your specified time every day. For example, you can have a player on from 8:00 to 22:00 every day.
¡ Timer On and off time can be defined respectively in 5 timers. Press the arrows on the remote to move to a box and make adjusting. ¡ Always On – The player, if powered, keeps being on all the time. ¡ Always Off – The player keeps being off and if turned on manually, it will automatically turn off two minute later, if there is no operation. ¡ Manual allows you to control the on/off time manually.

Week Setting – This mode will have the player turned on/off automatically at your specified time on each day of every week.
5.2.16 Timer Strategy Volume timer: This menu allows you to specify playback volume and display screens for a specified period. When the volume policy is off, you can manually adjust the terminal volume. When the volume policy is turned on, the volume can be set for up to 5 time periods. Default volume: set a value when turned on to play video programs, the volume will display the set parameters. At this time, the volume will automatically change back to the default volume after manual modification.
5.2.17 Network Settings When the working mode is WiFi mode, the wifi setting page displays the wifi signal nearby, click on one of the wifi signals available to connect

When the working mode is LAN, in this page the LAN mode is by default. Set IP manually under Android system.
5.2.18 Server Configuration In this page can be set file server switch. Server connection mode: IP mode and domain name mode (by default)

5.2.19 File Management Displays built-in storage information displayed on this page, such as storage name, file format, and capacity information. Format: format built-in storage, the programs and content in the built-in storage will be deleted, freeing up storage space.
5.3. Broadcast Programs on Single Mode 1. Press the Menu key of remote control enters OSD menu -> select working mode -> select single. 2. Copy the video/picture to the usb drive and insert it into the usb port of the machine. The system will detect and copy the programs automatically. 3. When the copy is finished, the system will automatically play the newly imported video/picture program.

VI. Service policy The voltage, frequency and current requirements indicated on label must be met since any misconduct will lead to abnormal operation, equipment damage, or fire disaster. Maintenance can only be carried out by qualified technicians. Please contact a qualified electrician or manufacturer if you are in doubt about the installation. Please keep the machine away from humid environment, for more information, please call Goodview aftersales service line:400-7052-668 Product that manifests manufacturing defects identified within 30 days which starting from arriving destination port is considered DOA, DOA is defined as a defect that prevents the full use of the Product when first unboxed or first operated because of its quality issue. The Seller will be responsible for sending spare parts for repair or providing compensation or equivalent discounts.