MOVO MK-MC6Oo Omnidirectional Microphone User Guide
- October 30, 2023
- MOVO
Table of Contents
MOVO MK-MC6Oo Omnidirectional Microphone
Product Information
- The product is an omnidirectional microphone device that can be connected to a network terminal equipment through USB or Bluetooth wireless connection. It comes with a data cable, an instruction manual, and a USB-C port for charging.
- The device has a speaker, a Bluetooth indicator light, a Bluetooth button, a power button, a team cascade button, a volume one button, a microphone mute button, a volume + button, a cascade indicator light, a ring indicator light, and a charging indicator light.
- The device has a USB interface and requires a network terminal equipment with a Bluetooth function or installed with a Bluetooth adapter for wireless connection.
- The device can be used for Bluetooth wireless cascading between two omnidirectional microphone devices. The master and slave device attributes can be set between the microphone devices. Only the master device can connect with the network terminal device through Bluetooth or USB cable connection.
Product Usage Instructions
-
To switch on and off the omnidirectional microphone device, long press the power button.
-
Connect the USB interface of the device to the power supply with a USB cable to charge it. The battery is low when there is a ring indicator light and a voice prompt. Charge it in time.
-
To connect the device to a network terminal equipment through USB, insert the omnidirectional microphone device into the USB interface of the network terminal equipment.
-
To connect the device to a network terminal equipment through Bluetooth wireless connection, turn on the device and wait for the blue light of the Bluetooth indicator to flash. Turn on the Bluetooth on the network terminal equipment and search for the omnidirectional microphone device. After confirming the connection, the blue light of the Bluetooth indicator will stay on, and it can be used normally.
-
If the omnidirectional microphone device USB cable and Bluetooth wireless device are connected to the network terminal Bluetooth device at the same time, the Bluetooth connection takes
priority. To switch to a USB wired connection, long press the Bluetooth button of the omnidirectional microphone device to disconnect the Bluetooth. -
To use Bluetooth wireless cascading, set the master and slave device attributes between two omnidirectional microphone devices. Only the master device can connect with the network terminal device through Bluetooth or USB cable connection. After cascading, the application range of sound pickup and playback can be expanded.
Product introduction
- Do not try to disassemble or replace any parts in the product except for the operation methods marked in the manual.
- Do not put the product into any liquid, this product is not waterproof.
- If any liquid accidentally enters the product, please disconnect and remove the product immediately.
- To avoid electric shock, please make sure that your hands are not wet when installing or uninstalling the product.
- Do not place this product near a heat source or directly expose it to a fire source.
- Do not place this product in an environment with strong electromagnetic force, otherwise it will cause product failure.
Product description
Thank you very much for using the omnidirectional microphone product of our company! Before using this product, please read the product instruction manual carefully. This manual introduces the function, installation and operation of omnidirectional microphone products. This product omnidirectional microphone is a network conference call device with Bluetooth wireless or USB wired connection. Bluetooth cascading between omnidirectional microphone devices can expand the application range of sound pickup and playback. It has the latest generation of voice echo cancellation and environmental noise reduction. Processing algorithm, the sound quality of the call is clear and natural, the body is light, easy to carry, easy to install and operate, especially suitable for application scenarios such as network conference calls between mobile phones, tablets, and computer terminals. The pictures in the product manual are schematic illustrations, please refer to the actual product for details.
Packing list
- Omnidirectional microphone X1
- Data cable X1
- Instruction manual X1
Product description
- Microphone
- Speaker
- Bluetooth indicator light
- Bluetooth button
- Power button
- Team cascade button
- Volume “one” button
- Microphone mute button
- Volume “+” button
- Cascade indicator light
- Ring indicator light
- Charging indicator light
- USB-C port
Description of Device Indicators
- Power on : The green light of the ring indicator light gradually lights up, and the voice prompts “Power on, waiting for Bluetooth connection”.
- Shutdown: The green light of the ring indicator light gradually goes out, and the voice prompts “shutdown”.
- When the battery is low: every 5 minutes, the white light of the ring indicator light will flash 3 times, and the voice prompts “the battery is low, please charge”. When charging, the charging indicator light is solid orange, and the light will turn off when fully charged.
- When the volume is adjusted to the maximum: the green light of the ring indicator flashes 3 times.
- When the volume is turned to the minimum and muted: the green light at the bottom flashes 3 times, and then turns to a steady green light at the bottom.
- Mute the microphone: the ring indicator light is always red.
- Bluetooth connected: In Bluetooth mode, the blue light of the Bluetooth indicator is always on.
- Bluetooth is not connected: In Bluetooth mode, the blue light of the Bluetooth indicator flashes.
- Omni-directional microphone equipment team cascading: After the cascade is successful, the white light of the cascade indicator of the microphone master device is always on, and the white light of the cascade indicator of the microphone slave device flashes.
Device connection
Omnidirectional microphone equipment and network terminal equipment (such as
mobile phones, tablets, computers, etc.) have two connection application
methods: USB wired connection and Bluetooth connection.
USB wired connection to the network terminal device: first use the USB data
cable to connect the omnidirectional microphone main device and the USB
interface of the network terminal device, wait for the voice prompt “USB
speaker”, and the network terminal device (such as a computer) will
automatically recognize the microphone main device After the device model is
connected successfully, the function of USB wired connection can be used
normally. If the USB is connected, the Bluetooth indicator is off by default.
Omnidirectional microphone device
Insert into the USB interface network terminal equipment
Bluetooth wireless connection network terminal equipment:
After the omnidirectional microphone device is turned on, the blue light of
the bluetooth indicator flashes waiting for connection. Turn on the bluetooth
on the network terminal device, and confirm the connection after searching for
the omnidirectional microphone device. After the connection is successful, the
blue light of the bluetooth indicator is always on, and it can be used
normally. Bluetooth function.
Note : The network terminal device needs to have a Bluetooth function or
be installed with a Bluetooth adapter. When the omnidirectional microphone
device USB cable and Bluetooth wireless device are connected to the network
terminal Bluetooth device at the same time, the Bluetooth connection takes
priority. Only after long pressing the Bluetooth button of the omnidirectional
microphone device to disconnect the Bluetooth To switch to a USB wired
connection.
Bluetooth wireless cascading is used between two omnidirectional microphone
devices. The master and slave device attributes can be set between the
microphone devices. Only the master device can connect with the network
terminal device through Bluetooth or USB cable connection. Through Bluetooth
wireless cascade, after cascading, the application range of sound pickup and
playback can be expanded.
Instructions
-
Switching and charging of the omnidirectional microphone device:
Long press the switch button to start and shut down the device.
Connect the USB interface of the device to the power supply with a USB cable and it will automatically turn on.
When the battery is low, there will be a ring indicator light and a voice prompt for low battery, please charge it in time. -
Team cascading and master-slave device settings:
Two omnidirectional microphone devices press and hold the team cascading button at the same time. When the voice prompts “waiting for team formation”, the devices will automatically form a team. After the team formation is successful, there will be a voice prompt “team formation successful”. The white light of the cascade indicator of the device will be always on, and the white light of the cascade indicator of the microphone slave device will flash.
Note : If the two devices are successfully cascaded first, and then connected via USB or Bluetooth, you can only connect to the host with the cascade indicator always on, and the slave with the flashing cascade indicator will not respond. -
The volume of Internet calls and the mute operation of the microphone:
-
After the omnidirectional microphone device and the network terminal (such as a computer) are connected successfully through USB cable or Bluetooth wireless connection, the instant messaging or network conference application software (such as: QQ.Skype, etc.) in the network terminal can be used. , according to the operation method of this application software, you can make a web conference call.
-
When the omnidirectional microphone device is connected to a network terminal device (such as a mobile phone) via Bluetooth, the microphone and speaker of the omnidirectional microphone device can be used for sound pickup and playback.
-
Horn volume adjustment: During a call, continuously press the speaker volume down button of the omnidirectional microphone device to gradually reduce the speaker volume to the minimum (speaker mute); continuously press the speaker volume plus button to gradually increase the speaker volume Volume up to maximum.
-
Microphone pick-up and mute: During a call, the microphone is in the pick-up state by default, press the microphone mute button of the omnidirectional microphone device, and the ring indicator light is red, indicating that the microphone is muted; press this button again, the red light When off, it means that the microphone pickup is resumed.
-
In the team cascading mode, the volume adjustment and microphone mute operation of the omnidirectional microphone master and slave devices will be synchronized and consistent.
Precautions
- To ensure good performance of the equipment and to avoid dangerous or illegal situations, please follow all electrical safety regulations and applicable laws before using and operating the equipment.
- It is required to connect the USB cable of this device directly to the USB interface of the computer network terminal. If it is connected through a USB hub, it may cause operational problems.
- Whether the device driver is successfully installed and connected, you can check whether the default device displays “MK-MC60o” in the options of sound and audio device properties in the computer control panel option, playback (output) and recording (input), otherwise you need to re-select “MK-MC6Oo”, and confirm.
- In order not to affect the use of the device, please do not block the microphone, or place the device in an unobstructed location.
- If you make a call during cascading, it is recommended that the distance between the master and the slave be more than 2 meters, otherwise the distance between the devices will affect the quality of the call.
- During use, if you need to adjust the volume of the microphone, please select this model device in the communication software when using the instant messaging application software.
- Please use the supplied USB cable to connect the device to the computer.
- If consumers use a power adapter for power supply, they should purchase a power adapter that has obtained CCC certification and meets the standard requirements.
- Do not attempt to repair this device, there is a risk of electric shock, if there is a problem and needs to be repaired, please contact your dealer.
Technical Parameters
Basic Information
- product name
- Product number
- Product color
- dark gray
- Product Size
- product weight
- input voltage current
- rated power
- Battery
- connect
- USB connection
- bluetooth connection
- Environmental requirements
- Temperature: 0°C to 44°C; Humidity: 20% to 85% (non-condensing); Storage temperature: -10°C to 55°C; Noise level: <48db; Reverberation time: <0.5 seconds
- Supported OS
- audio features
- microphone
- omnidirectional microphone
- sensitivity
- SNR
- Microphone audio sample rate
- USB mode: 16KHz pickup sampling rate + 48KHz playback sampling rate
- Bluetooth call mode: 16K pickup sampling rate + 16K playback sampling rate
- Bluetooth playback mode: 48K playback sampling rate
- Speaker parameters
- frequency response
- number of microphones
- audio characteristics
- 360° intelligent pickup, 384ms echo cancellation, intelligent dynamic noise reduction, automatic gain control
- Pickup distance
- 3-5 meters
- bluetooth parameters
- bluetooth version
- interface
- USB interface
- working frequency
- connection distance
- packing list
- Host1, Type-C data cable1, manual*1
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
- The device has been evaluated to meet general RF exposure requirements.
- The device can be used in portable exposure condition and compliance with exposure requirements.