ALCAD DMH-542 Digital Modulator Instruction Manual
- August 28, 2024
- ALCAD
Table of Contents
ALCAD DMH-542 Digital Modulator
Product Usage Instructions
Safety Instructions
Before installation, please read and follow the important safety instructions provided in the manual to ensure safe operation of the product.
Quick Install
- To quickly install the product, select either QAN-128 or QAM-256 as per your preference.
TS Settings and System Setup
- Adjust the TS settings and system setup parameters according to your requirements for DVB-T, DVB-C, or ISDB-T.
HDMI Input
- For HDMI input, ensure the H.264 encoding is within the specified bitrate range and select the appropriate resolution based on your display device.
Frequently Asked Questions
Q: What is the purpose of this product?
A: This product is a composite video input standard definition DVB-T/DVB-C/ISDB-T HD modulator designed to provide COFDM RF signal in the frequency range of 50-860MHz for transporting AV/HD signals from various sources to a TV or set-top-box.
Q: What are the supported input modes and parameters?
A: The product supports various input modes such as DVB-T, DVB-C, and ISDB-T with specific bandwidths, modes, FEC values, guard intervals, MER levels, and output frequencies.
Q: How can I connect external devices to this modulator?
A: External devices can be connected through interfaces like CVBS, HDMI input, or RF output ports based on the requirements of the setup.
Q: What power supply does this product require?
A: The product requires a DC power supply of 12V with a current rating of 1.5A for proper operation.
Q: Can this modulator be used to increase the number of channels in an SMATV system?
A: Yes, this modulator can be used in series with others to expand the number of channels transmitted over a coaxial cable in a SMATV system.
GUIDE
IMPORTANT SAFETY INSTRUCTIONS
- Thank you for choosing our product. Before installation, we would like to remind you of some notes, which are very important for operating safely and properly, as follows.
- Be sure to read this user manual before starting your operation.
- When the unit is suddenly moved to a hot area from a cold area, it may cause some problems. In that case, turn off the power, and turn it on again after 1-2 hours.
- Keep the modulator placed in a clean space with sufficient ven-tilation.
- Do not cover the modulator with or place it on a unit that emits heat.
- Clean the case with a soft cloth with a little washing liquid.
- Do not remove the cover.
- Do not let the unit be exposed to extreme heat, cold, or humid conditions.
- No liquids or any other materials to come inside of the unit.
GENERAL DESCRIPTION
- This is a composite video input standard definition DVB-T/DVB-C/ISDB-T(Optional) HD modulator which provides COFDM RF signal in a range of 50-860MHz.
- It is designed to achieve AV/HD input, and it only supports standard H.264 encoding.
- It is an excellent choice to transport AV/HD signals from TV satellite receivers, surveillance cameras, or video/media players to an LCD TV or set-top-box.
- It can be used in series with another modulator so the number of channels in the coaxial cable in the SMATV system can be increased as desired.
PRODUCT OVERVIEW & ILLUSTRATION
No. | Description | Function |
---|---|---|
1 | LCD Screen | Menu display |
2 | PWR | Power indicator light |
3 | CVBS | CVBS indicator light |
4 | RETURN | Return submenu and save settings |
5 | OK | Confirm the current operation |
6 | ▲ | Change the frequency point or cursor up |
7 | ► | Switch settings in the menu or cursor right |
8 | ▼ | Change the frequency point or cursor down |
9 | ◄ | Switch settings in the menu or cursor left |
10 | RF OUT | Rf output port |
11 | ANT IN | External digital signal input port |
No | Description | Function |
--- | --- | --- |
12 | VIDEO IN | Video signal input port |
13 | AUDIO IN | Audio signal input port |
14 | DC 12V IN | Connect to Adaptor Input |
15 | HD IN | HD signal input port |
16 | HD | HD indicator light |
17 | PC | Software upgrade port |
FEATURES
- High level of integration, high-performance, Full-featured, integrated design
- Single input modulator that converts AV/HD source to a DVB-T/DVB-C/ISDB-T channel
- Standard COFDM modulation and H.264 encoding
- Multiple video format compatibility including 576i(PAL) / 480i(NTSC) / 720p / 1080p
- Frequency range: 50~860MHz
- Continuously adjustable RF attenuation range from 0dB to 30dB, step 1dB
- 2.4-inch color LCD
- Small size and lightweight
- User-friendly setup and control
- Compact and wall-mountable
OSD MENU INSTRUCTION
- The HD Modulator will initialize to the main interface after power on, and press OK into the main menu.
- Quick Install
- DVB Settings
- TS Settings
- System Setup
- About
QUICK INSTALL
- Country: press ◄► key to enter the country list, use ▲▼ the key to select a country, and then press to confirm.
- Channel Name: press ◄► key to change the channel number.
- Frequency: Frequency setting in the range of 50~860MHz, press ◄► key to move the cursor and press ▲▼ the key to change numbers.
- Bandwidth: 6M/7M/8M optional, press ◄► key to switch bandwidth only in DVB-T mode.
- RF Attenuation: RF attenuation setting, press ◄► key to change value in a range of 0~30dB, step 1 dB.
- Signal Source: press ◄► key to select HD or CVBS.
- LCN: use ▲▼◄► key to edit the logical channel number.
- Program Name: use ▲▼◄► key to edit the program name.
- Remote Key ID: use ▲▼◄► key to edit the ID number for TV program sorting only in ISDB-T mode.
- Area Code: use ▲▼◄► key to edit the area code only in ISDB-T mode.
DVB SETTINGS
DVB-T Mode:
- Carrier Type: 2K/8K optional.
- Constellation: QPSK/QAM-16/QAM-64 optional.
- Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8 optional.
- Guard Interval: 1/4, 1/8, 1/16, 1/32 optional.
DVB-C Mode:
- Symbol Rate: default is 6875kbps.
- Constellation: QAM-16/QAM-32/QAM-64/ QAN-128/QAM-256 optional.
ISDB-T Mode:
- Carrier Type: 2K/4K/8K optional.
- Constellation: QPSK/QAM-16/QAM-64 optional.
- Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8 optional.
- Guard Interval: 1/4, 1/8, 1/16, 1/32 optional.
TS SETTINGS
- NID: Network ID can be modified by ▲▼◄► key (Max 65535).
- ONID: Original Network ID can be modified by ▲▼◄► key (Max 65535).
- TSID: Transport Stream ID can be modified by ▲▼◄► key (Max 65535).
- SID: Service ID can be modified by ▲▼◄► key (Max 65535).
- PMT PID: PMT PID can be modified by ▲▼◄► key (Max 8191).
- Video PID: video PID can be modified by ▲▼◄► key (Max 8191).
- Audio PID: audio PID can be modified by ▲▼◄► key (Max 8191).
- Video Bitrate: default is Auto mode, or 1M~20M optional.
- Audio Bitrate: 64K/128K/192K/256K/320K optional.
- Service Provider: use ▲▼◄►key to edit the service provider.
- Network Name: use ▲▼◄►key to edit the network name.
SYSTEM SETUP
- OSD Language: press ◄► key to change language, the default is English.
- Modulator Mode: DVB-T/DVB-C/ISDB-T optional according to customer requirements.
- Key Tone: press ◄► key to ON/OFF key tone.
- Factory Set: press OK to confirm factory reset.
ABOUT
- Display some information about software and hardware versions.
TECHNICAL SPECIFICATION
DVB- T Mode
Bandwidth| 6M/7M/8M
Carrier| 2K/8K
Constellation| QPSK/QAM-16/QAM-64
Code Rate| 1/2, 2/3, 3/4, 5/6, 7/8
Guard Interval| 1/4, 1/8, 1/16, 1/32
MER| >32dB
Frequency Range| 50 ~ 860MHz
Attenuator| 0 ~ 30dB
Output Impedance| 75Ω
DVB-C Mode
Bandwidth| 8M
Symbol Rate| 6875kbps, editable
Constellation| QAM-16/QAM-32/QAM-64/ QAM-128/QAM-256
MER| >32dB
Frequency Range| 50 ~ 860 MHz
Attenuator| 0 ~ 30dB
Output Impedance| 75Ω
ISDB- T Mode
Bandwidth| 6M
Carrier| 2K/4K/8K
Constellation| QPSK/QAM-16/QAM-64
Code Rate| 1/2, 2/3, 3/4, 5/6, 7/8
Guard Interval| 1/4, 1/8, 1/16, 1/32
---|---
MER| >32dB
Frequency Range| 50 ~ 860MHz
Attenuator| 0 ~ 30dB
Output Impedance| 75Ω
HD Input
Compression| H.264 – bitrate 1-20 Mb/s
*** Video Resolution| 19201080_60P, 1920*1080_50P;
19201080_60i, 19201080_50i;
1280720_60p, 1280720_50P
Connector| HD
Video Output
*** Video Resolution| 19201080_30P, 1920*1080_25P;
19201080_30i, 19201080_25i;
1280720_30p, 1280720_25P
General
Power Source| DC 12V / 1.5A
Operating Temperature| 0 ~ +45°C
Dimensions| 155mm(L) × 114mm(W) × 33mm(H)
Weight| 0.34Kg
- www.alcadelectronics.com.
- ALCAD Electronics, S.L.
- Pol. Ind. Arreche-Ugalde, 1
- Apdo. 455
- 20305 IRUN – Spain
- Tel. (+34) 943 63 96 60
- info@alcad.net
Documents / Resources
|
ALCAD DMH-542 Digital
Modulator
[pdf] Instruction Manual
9510074.01, DMH-542 Digital Modulator, DMH-542, Digital Modulator, Modulator
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>