Femicgal X115 Smart Table Water Dispenser User Manual

Femicgal X115 Smart Table Water Dispenser

Thank you for choosing this product
Please read this manual carefully before using this product

Production Introduction

1. Water outlet port
2. Water outlet pipe
3. Cup holder
4. Water level light
5. Water level keypad
6. Power keypad/ Water outlet keypad
7. USB charge port
8. Water intake

Selling Points

Product Parameters

• Model: X115
• Product Material: ABS
• Rate Input : 5V=0.8A
• Battery Capacity: 1800mAh
• Power Jack: TYPE-C
• Product Weight: 0.58 lb
• Executive Standard: GB 4706.1-2005
• Dimension: 4.92×5.39×8.85 inches

Product Instruction

• Long press the water outlet button: Power on/off (Pumping gear defaults to last time setting when powered on, all LED lights will be lit together, also battery level is showing, all lights flash 3 times and then turn off)
• Single click the water outlet keypad: Start Pump/Stop Pump
• Single click the water level keypad: Shift mode setting (Add 1 level with the single press in the cycle, there are a total 7 levels and corresponding lights are: 100ML, 200ML, 300ML, 500ML, 700ML, 1000ML, and unlimited flow, each gear has a corresponding light on, all LED lights on when unlimited flow)
  Low battery reminder: When the battery is lower than 10%, the light flashes quickly to remind charge on time (lighting reminder of corresponding gear)
  Light is flash when charging and lights up after fully charged.
  After standby for 2 minutes, the machine goes to sleep and turns off the light, at this time, press any keypad to wake up and show the current gear light.

Specail Instruction

1. This machine can only be used for pure water at 5-40 degrees Celsius, please don’t use it for gel liquid.
2. This machine is only prevent to spray water of life, please don’t wash with water.
3. The water inlet pipe can’t be higher than the dispenser to prevent dripping water from the water outlet.

Installation Steps

1. The water outlet aligns to this icon then press down and rotate tothe left to this icon is OK.
2. Install the bottom of the water pipe and insert it into the corresponding position.

NOTE:

For a better user experience. Here are some notes that will help you, please read them carefully, and if you still have questions after reading them, please contact us through Amazon.

1. Before the first use, please ensure that the device is fully charged and install the pole body securely in the locked position.
2. For the initial use, please clean the water pipe before using it, and avoid drinking the first few cups of water directly.
3. Ensure that the water bucket is positioned lower than the product.
4. When connecting the pump, make sure that the water pipe is tightly connected, and ensure that the head is resistant to loosening.
5. Avoid folding the hose to prevent any impact on the pumping function.
6. The size of the water cup should not exceed 6.4 inches.
7. Do not rinse the product directly with water.

Warranty Card

1. Since the date of purchase, if there is no man-made product failure, we will provide a half-year free warranty.
2. The below circumstances are not included during the warranty period:
3. a. Failures or damages that are caused by unauthorized disassembly repair.
4. b. Failures caused by improper use, such as liquid injection, external force extrusion, falling damage, etc.
5. c. Damage caused by natural disasters or irresistible factors.
6. Please keep this warranty card well. If you can’t provide this card. it will be deemed that the product has exceeded the warranty period, certain materials cost and repair cost will be collected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>