AGEK RGB LED Wall Clock User Manual

AGEK RGB LED Wall Clock

Overview

Language/DST/Years/Date/Time Set Up

1. Press the “SET” button to start.
   “ENe Keep last, nomil see the screen, you can change to the other language by press “+” or “-“.

2. Setting up DST, years, date, and time with”+”,”-” and”SET” buttons (“SET” button as”Confirm” button.
   If the date is entered correctly, the day will auto-format.

3. Press the “SET” button to the time display after all settings are completed.

Date and Temperature Display Format Switch

1. Press the “+” button for around 2 seconds to set display mode.
2. Press the “+” button to switch the display format as shown in the following.
3. Treat the “SET” button as the “Confirm” button when setting.

• MONTH TEMP DATE: Display Month Date and Temp every 5s in turns.
• MONTH DATE: Display Month Date without Temp.
• TEMP: Display Temperature only.

Alarm Set Up

1. Press the “Alarm Set” button for set up.

2. Alarm Choosing. (“AL1” flashes at the bottom of the screen. Press the “SET” button for the next step) (AL1 is the only option).

3. Alarm turn ON/OFF.
   Press “+”/”-” to make the alarm ON/OFF, then press “SET” as “Confirm”.

4. Alarm time setting.
   Press”+”/”-“to set up alarm time, then press”SET” as “Confirm”.

5. Alarm working day mode.
   (Press”+”/”-“to choose the mode):
   Alarm running

   • I E: Everyday;
   • 2 E: Mon-Fri;
   • 3 E: Sat-Sun.

6. Press the “SET” button when you finish.

SNOOZE and Intelligently Turn Off Alarm

1. Snooze Function.
   Once the alarm rings, press the “SNOOZE” button to stop it but will ring again after 9 minutes.

2. Intelligently turn off the alarm with any keys.
   When the alarm rings, press any of these 5 buttons to turn it off but will ring up again for the next day.

Timer Set Up On Wall Clock

• 1-T8 Timing range: 0:00:00-29:59:59.
• 9 long timing range: 39 days 23 hours 59 minutes 59 seconds.
• Automatically save the last time when starting up (with a memory battery).
• Once finished timing. “BIBI” sounds up about 90 seconds.

Count Down setting

1. Press the “Timer” button to start timing mode.
2. The display turns to time mode.
3. Setting up timer to count down.
4. The button for start/pause.
5. Press these two buttons together to clear, then it will display 0:00:00.
6. Press the “Timer” button to switch to the next set of timing modes, until you return to the time display.

Count Upsetting

1. Press the “Timer” button to start timing mode.
2. Press these two buttons together to clear, then it will display 0:00:00.
3. Press the ” SNOOZE” button to start counting up.

Hourly Chime Set Up

1. Keep pressing the “Alarm Set” button for 2 seconds to start, then press “+” or “-” to choose the ringtone.
   (There are 3 ringtones)

   • S1: AVE MARIA + CHIME
   • S2: WESTMINSTER ABBEY + CHIME
   • S3: CHIME

2. Press” SET” to set up a time range for hour ringing, and press”+”/”_” to choose the mode.

• MOD 1: Not chime
• MOD 2: Hourly chime
• Mode 3: Chime from 6:00 to 21:00

Remote Control

Large Digital Wall Clock with Remote Control

MADE IN CHINA.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>