RUUD RA13NY-18 Endeavor Line Achiever Series iM Air Conditioners Owner’s Manual
- September 23, 2024
- RUUD
Table of Contents
- RA13NY-18 Endeavor Line Achiever Series iM Air Conditioners
- Specifications:
- Product Information:
- Features and Benefits:
- Model Number Identification:
- General Data/Electrical Data:
- Accessories/Weighted Sound Power:
- Product Usage Instructions:
- Installation:
- Maintenance:
- Q: What refrigerant type does the RA13NY Air Conditioner
- Q: What is the SEER rating of the RA13NY Air Conditioner?
- Q: How often should I schedule maintenance for the air
RA13NY-18 Endeavor Line Achiever Series iM Air Conditioners
“`html
Specifications:
- Cooling Efficiency: 13.4 SEER / 9 EER
- Nominal Sizes: 1.5 to 5 Tons [5.3 to 17.6 kW]
- Cooling Capacities: 17.1 to 55.5 kBTU [5.0 to 16.3 kW]
- Refrigerant Type: R-454B
Product Information:
The RA13NY Air Conditioner models offer efficient cooling with a
SEER rating of 13.4 and EER rating of 9. They are available in
sizes ranging from 1.5 to 5 tons, providing cooling capacities from
17.1 to 55.5 kBTU. The units use environmentally friendly R-454B
refrigerant.
Features and Benefits:
- Low GWP refrigerant for reduced greenhouse gas emissions
- 3/8 inch condenser coil in 1.5 ton models
- Energy efficient design for dependable comfort
Model Number Identification:
The model number breakdown indicates the brand, product
category, SEER rating, refrigerant type, capacity in BTU/hr, major
series, voltage, type, controls, and minor series option code.
General Data/Electrical Data:
Model No.| Nominal Tonnage| Valve Connections| Number of Blades| Motor hp|
CFM| RPM| Watts
---|---|---|---|---|---|---|---
Line Voltage Data (Volts-Phase-Hz)| Compressor Rated Load Amps| Compressor
Locked Rotor Amps| Condenser Fan Motor Full Load Amps| Condenser Fan Motor
Locked Rotor Amps
---|---|---|---|---
Accessories/Weighted Sound Power:
- Various accessories available for customization and
control
Product Usage Instructions:
Installation:
- Choose a suitable location for the air conditioner unit.
- Ensure proper electrical connections are in place.
- Mount the unit securely using appropriate hardware.
Maintenance:
- Regularly clean the filters to ensure optimal airflow.
- Inspect the unit for any signs of damage or wear.
- Schedule professional maintenance at least once a year.
Frequently Asked Questions (FAQ):
Q: What refrigerant type does the RA13NY Air Conditioner
use?
A: The RA13NY models use R-454B refrigerant, known for its low
global warming potential.
Q: What is the SEER rating of the RA13NY Air Conditioner?
A: The RA13NY Air Conditioner has a cooling efficiency rating of
13.4 SEER.
Q: How often should I schedule maintenance for the air
conditioner?
A: It is recommended to have professional maintenance conducted
on the air conditioner at least once a year to ensure optimal
performance and efficiency.
“`
Air Conditioners RA13NY
Endeavor® Line Achiever ® Series iM Air Conditioners
RA13NY
Cooling Efficiency: 13.4 SEER2 / 9 EER2 Nominal Sizes: 1.5 to 5 Tons [5.3 to
17.6 kW] Cooling Capacities: 17.1 to 55.5 kBTU [5.0 to 16.3 kW] Refrigerant
Type: R-454B
13.4
FORM NO. A22-345
Table of Contents RA13NY
Table of Contents
Features & Benefits …………………………………………………………3 Model Number Identification
…………………………………………….4 General Data/Electrical Data …………………………………………….5
Accessories ……………………………………………………………………6 Weighted Sound Power
…………………………………………………..6 Unit Dimensions ……………………………………………………………..7 Clearances
…………………………………………………………………….8 Refrigerant Line Size Information …………………………………
9-10 Performance Data …………………………………………………………11 Limited Warranty
…………………………………………………………..12
2
Features and Benefits
· 7mm Condenser Copper Coil1: Requires less refrigerant allowing for a smaller
and lighter footprint while enhancing reliability
· PlusOne® Expanded Valve Space: 3 in. 4 in. 5 in. service valve space
provides a minimum working area of 27-square inches for easier access
· PlusOne® Triple Service Access: 15 in. wide, industry leading corner service
access, two fastener, removeable corner and individual louver panels makes
repairs easier and faster
· Designing for Sustainability with Low GWP: For 2025, the Environmental
Protection Agency (EPA) has set a global warming potential (GWP) limit of 700
for refrigerant used in
Features and Benefits RA13NY
heating and cooling systems. This new requirement will result in a 78%2 lower
GWP than previous-generation refrigerants — with only minimal changes to
system installation. For us, this is another step toward our continued
sustainability goal of reducing greenhouse gas emissions, while still
delivering an exceptional level of energy efficient, dependable comfort
· PlusOne® Refrigerant Detection SystemTM3: An integrated one-box, patented
design featuring the A2L sensor and mitigation board, offering easier
commissioning with a single component and simplified wiring configuration,
compatibility with any 24V thermostat application and system protection by
automatically pausing outdoor unit operation — if excess refrigerant is
detected
15 ton models feature a 3/8 in. condenser coil 2When comparing the GWP of
R-454B to R-410A refrigerant 3Factory or field installed in the furnace coil
or air handler and is applicable to the complete heating and cooling system
featuring Low GWP Refrigerant (A2L)
3
Model Number Identification RA13NY
Air Conditioners
R
A
13
N
Y
24
A
J
1
N
A
LHP
Brand
Product Category
SEER2
Region Refrigerant Capacity BTU/HR Major Series
Voltage
Type
Controls
Minor Series Option Code
R – Ruud
A – Air Conditioners
13 – 13.4 SEER2 N – North Y – R-454B
18 – 18,000 [5.28 kW] 24 – 24,000 [7.03 kW] 30 – 30,000 [8.79 kW] 36 – 36,000 [10.55 kW] 42 – 42,000 [12.31 kW] 48 – 48,000 [14.07 kW] 60 – 60,000 [17.58 kW]
A – 1st Design
J – 1ph, 208-230/60
1 – Single Stage
N – Non-Communicating
A – 1st Design
LHP – W/HLPC
[ ] Designates Metric Conversions
Available Models RA13NY18AJ1NA RA13NY18AJ1NALHP RA13NY24AJ1NA RA13NY24AJ1NALHP RA13NY30AJ1NA RA13NY30AJ1NALHP RA13NY36AJ1NA RA13NY36AJ1NALHP RA13NY42AJ1NA RA13NY42AJ1NALHP RA13NY48AJ1NA RA13NY48AJ1NALHP RA13NY60AJ1NA RA13NY60AJ1NALHP
Description Endeavor® Line Achiever ® Series 1 1/2 ton 13.4 SEER2 Single-Stage iM Air Conditioner-208/230/1/60 Endeavor® Line Achiever ® Series 1 1/2 ton 13.4 SEER2 Single-Stage iM Air Conditioner w/ High/Low Pressure-208/230/1/60 Endeavor® Line Achiever ® Series 2 ton 13.4 SEER2 Single-Stage iM Air Conditioner-208/230/1/60 Endeavor® Line Achiever ® Series 2 ton 13.4 SEER2 Single-Stage iM Air Conditioner w/ High/Low Pressure-208/230/1/60 Endeavor® Line Achiever ® Series 2 1/2 ton 13.4 SEER2 Single-Stage iM Air Conditioner-208/230/1/60 Endeavor® Line Achiever ® Series 2 1/2 ton 13.4 SEER2 Single-Stage iM Air Conditioner w/ High/Low Pressure-208/230/1/60 Endeavor® Line Achiever ® Series 3 ton 13.4 SEER2 Single-Stage iM Air Conditioner-208/230/1/60 Endeavor® Line Achiever ® Series 3 ton 13.4 SEER2 Single-Stage iM Air Conditioner w/ High/Low Pressure-208/230/1/60 Endeavor® Line Achiever ® Series 3 1/2 ton 13.4 SEER2 Single-Stage iM Air Conditioner-208/230/1/60 Endeavor® Line Achiever ® Series 3 1/2 ton 13.4 SEER2 Single-Stage iM Air Conditioner w/ High/Low Pressure-208/230/1/60 Endeavor® Line Achiever ® Series 4 ton 13.4 SEER2 Single-Stage iM Air Conditioner-208/230/1/60 Endeavor® Line Achiever ® Series 4 ton 13.4 SEER2 Single-Stage iM Air Conditioner w/ High/Low Pressure-208/230/1/60 Endeavor® Line Achiever ® Series 5 ton 13.4 SEER2 Single-Stage iM Air Conditioner-208/230/1/60 Endeavor® Line Achiever ® Series 5 ton 13.4 SEER2 Single-Stage iM Air Conditioner w/ High/Low Pressure-208/230/1/60
Standard Equipment
R-454B Refrigerant Scroll Compressor Field Installed Filter Drier Front
Seating Service Valves Internal Pressure Relief Valve Internal Thermal
Overload Long Line capability Low Ambient capability with Kit 345 Expanded
Valve Space Composite Basepan 2 Screw Control Box Access 15″ Access to
Internal Components Quick release louver panel design No fasteners to remove
along bottom Optimized Venturi Airflow Powder coated paint Rust resistant
screws QR code External gauge ports Service trays
4
General Data/Electrical Data RA13NY
General Data
Model No. Nominal Tonnage Valve Connections
Liquid Line O.D. in. Suction Line O.D. in. Refrigerant (R-454B) furnished
oz.¹ Compressor Type Outdoor Coil Net face area Outer Coil Net face area
Inner Coil
Tube diameter in. Number of rows Fins per inch
Outdoor Fan Diameter in.
Number of blades Motor hp CFM RPM Watts
Shipping weight lbs. Operating weight lbs.
RA13NY18A 1.5
3/8 3/4 64
10.9 — 0.276 1 24
20 2 1/7 1765 1075 154 148 141
RA13NY24A 2.0
3/8 3/4 72
10.9 — 0.276 1 24
20 2 1/7 1765 1075 154 148 141
RA13NY30A 2.5
3/8 3/4 73
13.3 — 0.276 1 24
24 3 1/6 3146 825 197 170 163
RA13NY36A 3.0
3/8 3/4 108 Scroll
13.3 12.9 0.276
2 24
24 3 1/6 2760 825 188 193 186
RA13NY42A 3.5
3/8 7/8 112
14.3 13.9 0.276
2 24
24 2 1/5 2758 825 145 224 217
RA13NY48A 4.0
3/8 7/8 103
23.5 — 0.276 1 24
26 3 1/5 4264 850 203 251 244
RA13NY60A 5.0
3/8 7/8 176
28.4 — 0.375 1 22
26 3 1/5 4189 850 204 279 272
Electrical Data
Line Voltage Data (Volts-Phase-Hz)
208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60
Maximum overcurrent protection (amps)²
15
20
25
35
35
50
50
Minimum circuit ampacity³
12
14
17
22
23
30
31
Compressor
Rated load amps
8.3
10.3
12.7
16.7
17.3
22.4
23.7
Locked rotor amps
45
60.2
75.6
93.5
123
126
157
Condenser Fan Motor
Full load amps
0.8
0.8
0.8
0.8
0.8
1.0
1.0
Locked rotor amps
1.50
1.50
1.50
1.50
1.50
2.40
2.40
¹Refrigerant charge sufficient for 15 ft. length of refrigerant lines. For longer line set requirements see the installation instructions for information about set length and additional refrigerant charge required. ²HACR type circuit breaker of fuse. ³Refer to National Electrical Code manual to determine wire, fuse and disconnect size requirements.
5
Accessories/Weighted Sound Power RA13NY
Accessories
Model No.
RA13NY18A
Compressor crankcase heater*
44-17402-44
Low ambient control
RXAD-A08
Compressor sound cover
68-23427-26
Compressor hard start kit
SK-A1
Compressor time delay
RXMD-B01
Low pressure control
RXAC-A07
High pressure control
RXAB-A07
Liquid Line Solenoid (24 VAC, 50/60 Hz)
Solenoid Valve 200RD2T3TVLC
Solenoid Coil
61-AMG24V
Liquid Line Solenoid
Solenoid Valve 200RD2T3TVLC
(120/240 VAC, 50/60 Hz) Solenoid Coil 61-AMG120/240V
*Crankcase Heater recommended with Low Ambient Kit.
RA13NY24A 44-17402-44 RXAD-A08 68-23427-26
SK-A1 RXMD-B02 RXAC-A08 RXAB-A08 200RD2T3TVLC 61-AMG24V 200RD2T3TVLC
61-AMG120/240V
RA13NY30A 44-17402-44 RXAD-A08 68-23427-26
SK-A1 RXMD-B03 RXAC-A09 RXAB-A09 200RD2T3TVLC 61-AMG24V 200RD2T3TVLC
61-AMG120/240V
RA13NY36A 44-17402-44 RXAD-A08 68-23427-26
SK-A1 RXMD-B04 RXAC-A10 RXAB-A10 200RD2T3TVLC 61-AMG24V 200RD2T3TVLC
61-AMG120/240V
RA13NY42A 44-17402-45 RXAD-A08 68-23427-25
SK-A1 RXMD-B05 RXAC-A11 RXAB-A11 200RD2T3TVLC 61-AMG24V 200RD2T3TVLC
61-AMG120/240V
RA13NY48A 44-17402-45 RXAD-A08 68-23427-25
SK-A1 RXMD-B06 RXAC-A12 RXAB-A12 200RD3T3TVLC 61-AMG24V 200RD3T3TVLC
61-AMG120/240V
RA13NY60A Factory Standard
RXAD-A08 68-23427-25
SK-A1 RXMD-B07 RXAC-A13 RXAB-A13 200RD3T3TVLC 61-AMG24V 200RD3T3TVLC
61-AMG120/240V
Weighted Sound Power Level (dBA)
Unit Size – Voltage, Series
Standard Rating (dBA)
125
RA13NY18A
70
46.7
RA13NY24A
70
46.3
RA13NY30A
71
47.0
RA13NY36A
71
45.5
RA13NY42A
68
46.4
RA13NY48A
71
49.2
RA13NY60A
76
49.1
NOTE: Tested in accordance with AHRI Standard 270-08 (not listed in AHRI)
TYPICAL OCTAVE BAND SPECTRUM (dBA without tone adjustment)
250
500
1000
2000
4000
55.0
60.8
59.9
58.2
53.4
58.4
62.7
59.0
58.0
52.4
62.4
62.6
59.3
57.2
55.7
58.4
63.9
59.2
56.6
52.1
53.7
59.7
59.9
55.3
54.0
56.0
62.3
59.5
57.9
49.9
58.7
68.7
65.2
63.5
60.1
8000 46.9 47.3 47.1 47.7 50.3 40.7 55.7
6
Unit Dimensions
Model No.
RA13NY18AJ1NA RA13NY24AJ1NA RA13NY30AJ1NA RA13NY36AJ1NA RA13NY42AJ1NA
RA13NY48AJ1NA RA13NY60AJ1NA
H (Height)
INCHES mm
25.00
635
25.00
635
25.00
635
25.00
635
27.00
686
39.00
991
45.00
1143
OPERATING
L (Length)
INCHES mm
29.75
756
29.75
756
33.75
857
33.75
857
33.75
857
35.75
908
35.75
908
W (Width)
INCHES mm
29.75
756
29.75
756
33.75
857
33.75
857
33.75
857
35.75
908
35.75
908
H (Height)
INCHES
mm
26.50
673
26.50
673
26.50
673
26.50
673
28.50
724
40.50
1029
46.50
1181
SHIPPING
L (Length)
INCHES mm
32.38
822
32.38
822
36.38
924
36.38
924
36.38
924
38.38
975
38.38
975
Unit Dimensions RA13NY
W (Width)
INCHES mm
32.38
822
32.38
822
36.38
924
36.38
924
36.38
924
38.38
975
38.38
975
[ ] Designates Metric Conversions
ST-A1226-02-00 7
Clearances RA13NY
8
WALL
CLEARANCES
WALL
6 (152.4)
24 (609.6)
Service
12 (304.8)
6 (152.4)
WALL
24 (609.6) Service
12 (304.8)
6 (152.4)
12 (304.8)
24 (609.6)
Service
WALL
24 (609.6) Service
24 (609.6)
Service
18 (457.2)
24 (609.6)
24 recommended 6 minimum
24 (609.6)
24 recommended 6 minimum
NOTE: NUMBERS IN () = mm
IMPORTANT: When installing multiple units in an alcove, roof well or partially
enclosed area, ensure there is adequate ventillation to prevent re-circulation
of discharge air.
ST-A1225-01-00
Refrigerant Line Size Information RA13NY
Refrigerant Line Size Information
13.4/14.3 SEER2 AC R-454B
Allowable Allowable
Unit Size Liquid Line Suction Line 0-25
Size
Size
Equivalent Length (Feet)
26-50
51-75 76-100 101-125 126-150 151-175 176-200 201-225
Maximum Vertical Rise (Outdoor Unit Below Indoor Unit) * / Capacity Multiplier
1/4″
5/8″
25/1
50/0.99 61/0.99 41/0.98 21/0.98 1/0.98
0/0.98
0/0.98
0/0.97
5/16″
5/8″
25/1
50/0.99 75/0.99 100/0.98 98/0.98 93/0.98 87/0.98 82/0.98 78/0.97
3/8″ 1.5 Ton
1/4″
5/8″
25/1
50/0.99 75/0.99 100/0.98 117/0.98 115/0.98 114/0.98 112/0.98 111/0.97
3/4″
25/1
50/1
61/1
41/0.99 21/0.99 1/0.99
0/0.99
0/0.99
0/0.99
5/16″
3/4″
25/1
50/1
75/1 100/0.99 98/0.99 93/0.99 87/0.99 82/0.99 78/0.99
3/8″
3/4″
25/1
50/1
75/1 100/0.99 117/0.99 115/0.99 114/0.99 112/0.99 111/0.99
1/4″
5/8″
25/1
50/0.99 25/0.98 0/0.98
0/0.98
0/0.97
0/0.96
0/0.97
0/0.96
5/16″
5/8″
25/1
50/0.99 75/0.98 88/0.98 79/0.98 70/0.97 62/0.96 53/0.97 46/0.96
3/8″ 2 Ton
1/4″
5/8″
25/1
50/0.99 75/0.98 100/0.98 109/0.98 106/0.97 103/0.96 100/0.97 97/0.96
3/4″
25/1
50/1
25/0.99 0/0.99
0/0.99
0/0.98
0/0.98
0/0.99
0/0.99
5/16″
3/4″
25/1
50/1
75/0.99 88/0.99 79/0.99 70/0.98 62/0.98 53/0.99 46/0.99
3/8″
3/4″
25/1
50/1
75/0.99 100/0.99 109/0.99 106/0.98 103/0.98 100/0.99 97/0.99
5/16″
5/8″
25/0.99 50/0.98 75/0.98 69/0.97 56/0.98 43/0.96 30/0.94 17/0.93 6/0.92
2.5 Ton
3/8″ 5/16″
5/8″
25/0.99 50/0.98 75/0.98 100/0.97 101/0.98 96/0.96 92/0.94 87/0.93 83/0.92
3/4″
25/1
50/0.99 75/0.99 69/0.98 56/0.98 43/0.99 30/0.98 17/0.98 6/0.97
3/8″
3/4″
25/1
50/0.99 75/0.99 100/0.98 101/0.98 96/0.99 92/0.98 87/0.98 83/0.97
5/16″
5/8″
25/0.99 50/0.98 65/0.97 47/0.97 28/0.94 11/0.93 0/0.92
0/0.91
0/0.9
3/8″ 5/16″
5/8″
25/0.99 50/0.98 75/0.97 97/0.97 91/0.94 85/0.93 78/0.92 72/0.91 66/0.9
3/4″
25/1
50/0.99 65/0.98 47/0.99 28/0.98 11/0.98 0/0.97
0/0.96
0/0.96
3/8″ 3 Ton
1/2″
3/4″
25/1
50/0.99 75/0.98 97/0.99 91/0.98 85/0.98 78/0.97 72/0.96 66/0.96
3/4″
25/1
50/0.99 75/0.98 100/0.99 118/0.98 117/0.98 115/0.97 115/0.96 114/0.96
5/16″
7/8″
25/1
50/1
65/0.99 47/0.99 28/0.99 11/0.98 0/0.98
0/0.99
0/0.99
3/8″
7/8″
25/1
50/1
75/0.99 97/0.99 91/0.99 85/0.98 78/0.98 72/0.99 66/0.99
1/2″
7/8″
25/1
50/1
75/0.99 100/0.99 118/0.99 117/0.98 115/0.98 115/0.99 114/0.99
3/8″
3/4″
25/0.99 50/0.99 75/0.99 88/0.98 80/0.97 72/0.96 64/0.98 55/0.96 47/0.95
1/2″ 3.5 Ton
3/8″
3/4″
25/0.99 50/0.99 75/0.99 100/0.98 116/0.97 114/0.96 112/0.98 111/0.96 109/0.95
7/8″
25/1
50/0.99 75/0.99 88/0.99 80/0.98 72/0.99 64/0.99 55/0.98 47/0.98
1/2″
7/8″
25/1
50/0.99 75/0.99 100/0.99 116/0.98 114/0.99 112/0.99 111/0.98 109/0.98
3/8″
3/4″
25/0.99 50/0.98 75/0.98 78/0.97 68/0.96 57/0.97 46/0.95 36/0.94 25/0.93
1/2″ 4 Ton
3/8″
3/4″
25/0.99 50/0.98 75/0.98 100/0.97 113/0.96 111/0.97 109/0.95 107/0.94 105/0.93
7/8″
25/1
50/0.99 75/0.99 78/0.98 68/0.99 57/0.98 46/0.98 36/0.98 25/0.97
1/2″
7/8″
25/1
50/0.99 75/0.99 100/0.98 113/0.99 111/0.98 109/0.98 107/0.98 105/0.97
3/8″
3/4″
25/0.99 50/0.98 70/0.97 54/0.97 38/0.94 22/0.93 6/0.92
0/0.9
0/0.89
1/2″
3/4″
25/0.99 50/0.98 75/0.97 100/0.97 107/0.94 104/0.93 101/0.92 97/0.9 95/0.89
3/8″ 5 Ton
1/2″
7/8″
25/0.99 50/0.99 70/0.98 54/0.98 38/0.98 22/0.97 6/0.96
0/0.98
0/0.97
7/8″
25/0.99 50/0.99 75/0.98 100/0.98 107/0.98 104/0.97 101/0.96 97/0.98 95/0.97
3/8″
1-1/8″
25/1
50/1
70/1
54/0.99 38/0.99 22/0.99 6/0.99
0/0.99
0/0.99
1/2″
1-1/8″
25/1
50/1
75/1 100/0.99 107/0.99 104/0.99 101/0.99 97/0.99 95/0.99
NOTES: Maximum Equivalent Line Length may not exceed 250′. Maximum Actual Line Length may not exceed 200′. Light Grey shaded areas are considered long line and may require accessories as recommended in Long Line Set Guide. DO NOT use suction line traps in the suction riser as this adds additional unwanted pressure drop in the system.
226-250
0/0.97 75/0.97 110/0.97 0/0.98 75/0.98 110/0.98 0/0.95 40/0.95 94/0.95 0/0.98
40/0.98 94/0.98 0/0.93 78/0.93 0/0.97 78/0.97
0/0.9 60/0.9 0/0.98 60/0.98 112/0.98 0/0.99 60/0.99 112/0.99 39/0.95 108/0.95
39/0.98 108/0.98 15/0.93 104/0.93 15/0.97 104/0.97 0/0.89 93/0.89 0/0.96
93/0.96 0/0.98 93/0.98
9
Refrigerant Line Size Information RA13NY
Refrigerant Line Size Information (Con’t.)
13.4/14.3 SEER2 AC R-454B
Allowable
Unit Size
Liquid Line Size
mm [in.]
Allowable Suction Line
Size mm [in.]
0-7.6
Equivalent Length (Meters) 7.9-15.2 15.5-22.9 23.2-30.5 30.8-38.1 38.4-45.7
46-53.3 53.6-61 61.3-68.6 68.9-76.2
Maximum Vertical Rise (Outdoor Unit Below Indoor Unit) * / Capacity Multiplier
6.35 [1/4] 15.88 [5/8]
8/1
15/0.99 19/0.99 12/0.98 6/0.98
0/0.98
0/0.98
0/0.98
0/0.97
0/0.97
7.94 [5/16] 15.88 [5/8]
8/1
15/0.99 23/0.99 30/0.98 30/0.98 28/0.98 27/0.98 25/0.98 24/0.97 23/0.97
5.3 KW 9.53 [3/8] 15.88 [5/8]
8/1
15/0.99 23/0.99 30/0.98 36/0.98 35/0.98 35/0.98 34/0.98 34/0.97 34/0.97
[1.5 Ton] 6.35 [1/4] 19.05 [3/4]
8/1
15/1
19/1
12/0.99 6/0.99
0/0.99
0/0.99
0/0.99
0/0.99
0/0.98
7.94 [5/16] 19.05 [3/4]
8/1
15/1
23/1
30/0.99 30/0.99 28/0.99 27/0.99 25/0.99 24/0.99 23/0.98
9.53 [3/8] 19.05 [3/4]
8/1
15/1
23/1
30/0.99 36/0.99 35/0.99 35/0.99 34/0.99 34/0.99 34/0.98
6.35 [1/4] 15.88 [5/8]
8/1
15/0.99 8/0.98
0/0.98
0/0.98
0/0.97
0/0.96
0/0.97
0/0.96
0/0.95
7.94 [5/16] 15.88 [5/8]
8/1
15/0.99 23/0.98 27/0.98 24/0.98 21/0.97 19/0.96 16/0.97 14/0.96 12/0.95
7.0 KW 9.53 [3/8] 15.88 [5/8]
8/1
15/0.99 23/0.98 30/0.98 33/0.98 32/0.97 31/0.96 30/0.97 30/0.96 29/0.95
[2 Ton] 6.35 [1/4] 19.05 [3/4]
8/1
15/1
8/0.99
0/0.99
0/0.99
0/0.98
0/0.98
0/0.99
0/0.99
0/0.98
7.94 [5/16] 19.05 [3/4]
8/1
15/1
23/0.99 27/0.99 24/0.99 21/0.98 19/0.98 16/0.99 14/0.99 12/0.98
9.53 [3/8] 19.05 [3/4]
8/1
15/1
23/0.99 30/0.99 33/0.99 32/0.98 31/0.98 30/0.99 30/0.99 29/0.98
8.8 KW [2.5 Ton]
7.94 [5/16] 9.53 [3/8] 7.94 [5/16] 9.53 [3/8]
15.88 [5/8] 15.88 [5/8] 19.05 [3/4] 19.05 [3/4]
8/0.99 8/0.99
8/1 8/1
15/0.98 15/0.98 15/0.99 15/0.99
23/0.98 23/0.98 23/0.99 23/0.99
21/0.97 30/0.97 21/0.98 30/0.98
17/0.98 31/0.98 17/0.98 31/0.98
13/0.96 29/0.96 13/0.99 29/0.99
9/0.94 28/0.94 9/0.98 28/0.98
5/0.93 27/0.93 5/0.98 27/0.98
2/0.92 25/0.92 2/0.97 25/0.97
0/0.93 24/0.93 0/0.97 24/0.97
7.94 [5/16] 9.53 [3/8] 7.94 [5/16] 10.6 KW 9.53 [3/8] [3 Ton] 12.70 [1/2] 7.94 [5/16] 9.53 [3/8] 12.70 [1/2] 9.53 [3/8] 12.3 KW 12.70 [1/2] [3.5 Ton] 9.53 [3/8]
15.88 [5/8] 15.88 [5/8] 19.05 [3/4] 19.05 [3/4] 19.05 [3/4] 22.23 [7/8] 22.23 [7/8] 22.23 [7/8] 19.05 [3/4] 19.05 [3/4] 22.23 [7/8]
8/0.99 8/0.99
8/1 8/1 8/1 8/1 8/1 8/1 8/0.99 8/0.99 8/1
15/0.98 15/0.98 15/0.99 15/0.99 15/0.99
15/1 15/1 15/1 15/0.99 15/0.99 15/0.99
20/0.97 23/0.97 20/0.98 23/0.98 23/0.98 20/0.99 23/0.99 23/0.99 23/0.99 23/0.99 23/0.99
14/0.97 30/0.97 14/0.99 30/0.99 30/0.99 14/0.99 30/0.99 30/0.99 27/0.98 30/0.98 27/0.99
9/0.94 28/0.94 9/0.98 28/0.98 36/0.98 9/0.99 28/0.99 36/0.99 24/0.97 35/0.97 24/0.98
3/0.93 26/0.93 3/0.98 26/0.98 36/0.98 3/0.98 26/0.98 36/0.98 22/0.96 35/0.96 22/0.99
0/0.92 24/0.92 0/0.97 24/0.97 35/0.97 0/0.98 24/0.98 35/0.98 20/0.98 34/0.98 20/0.99
0/0.91 22/0.91 0/0.96 22/0.96 35/0.96 0/0.99 22/0.99 35/0.99 17/0.96 34/0.96 17/0.98
0/0.9 20/0.9 0/0.96 20/0.96 35/0.96 0/0.99 20/0.99 35/0.99 14/0.95 33/0.95 14/0.98
0/0.9 18/0.9 0/0.98 18/0.98 34/0.98 0/0.99 18/0.99 34/0.99 12/0.95 33/0.95 12/0.98
12.70 [1/2] 22.23 [7/8]
8/1
15/0.99 23/0.99 30/0.99 35/0.98 35/0.99 34/0.99 34/0.98 33/0.98 33/0.98
9.53 [3/8] 19.05 [3/4] 8/0.99 15/0.98 23/0.98 24/0.97 21/0.96 17/0.97 14/0.95 11/0.94 8/0.93
5/0.93
14.1 KW 12.70 [1/2] 19.05 [3/4] [4 Ton] 9.53 [3/8] 22.23 [7/8]
8/0.99 8/1
15/0.98 15/0.99
23/0.98 23/0.99
30/0.97 24/0.98
34/0.96 21/0.99
34/0.97 17/0.98
33/0.95 14/0.98
33/0.94 11/0.98
32/0.93 8/0.97
32/0.93 5/0.97
12.70 [1/2] 22.23 [7/8]
8/1
15/0.99 23/0.99 30/0.98 34/0.99 34/0.98 33/0.98 33/0.98 32/0.97 32/0.97
9.53 [3/8] 19.05 [3/4] 8/0.99 15/0.98 21/0.97 16/0.97 12/0.94 7/0.93
2/0.92
0/0.9
0/0.89
0/0.89
12.70 [1/2] 19.05 [3/4] 8/0.99 15/0.98 23/0.97 30/0.97 33/0.94 32/0.93 31/0.92 30/0.9 29/0.89 28/0.89
17.6 KW 9.53 [3/8] 22.23 [7/8] [5 Ton] 12.70 [1/2] 22.23 [7/8]
8/0.99 8/0.99
15/0.99 15/0.99
21/0.98 23/0.98
16/0.98 30/0.98
12/0.98 33/0.98
7/0.97 32/0.97
2/0.96 31/0.96
0/0.98 30/0.98
0/0.97 29/0.97
0/0.96 28/0.96
9.53 [3/8] 28.58 [1-1/8] 8/1
15/1
21/1
16/0.99 12/0.99 7/0.99
2/0.99
0/0.99
0/0.99
0/0.98
12.70 [1/2] 28.58 [1-1/8] 8/1
15/1
23/1
30/0.99 33/0.99 32/0.99 31/0.99 30/0.99 29/0.99 28/0.98
NOTES: Maximum Equivalent Line Length may not exceed 76 meters. Maximum Actual Line Length may not exceed 61 meters. Light Grey shaded areas are considered long line and may require accessories as recommended in Long Line Set Guide. DO NOT use suction line traps in the suction riser as this adds additional unwanted pressure drop in the system.
10
Performance Data RA13NY
Performance Data @ AHRI Standard Conditions Cooling
Designated Tested Combination (DTC)
Outdoor Unit
Indoor Coil
Total Capacity BTU/H [kW]
Net Sensible BTU/H [kW]
Net Latent BTU/H [kW]
SEER2 EER2
Indoor CFM [L/s]
RA13NY18AJ1
RCFY2417STAN
17,100 [5.0]
13,100 [3.8]
4,000 [1.2]
13.4
9.0
1,600 [283.2]
RA13NY24AJ1
RCFY2417MTAN
22,800 [6.7]
17,500 [5.1]
5,300 [1.6]
13.4
9.0
1,750 [354.0]
RA13NY30AJ1
RCFY3617STAN
28,600 [8.4]
21,900 [6.4]
6,700 [2.0]
13.4
9.0
1,910 [429.5]
RA13NY36AJ1
RCFY3621MTAN
34,200 [10.0]
26,200 [7.7]
8,000 [2.3]
13.4
9.0
1,050 [495.5]
RA13NY42AJ1
RCFY4821STAN
40,000 [11.7]
30,700 [9.0]
9,300 [2.7]
13.4
9.0
1,300 [613.5]
RA13NY48AJ1
RCFY4821STAN
45,500 [13.3]
34,900 [10.2]
10,600 [3.1]
13.4
9.0
1,425 [672.5]
RA13NY60AJ1
RCFY6024STAN
54,000 [15.8]
41,400 [12.1]
12,600 [3.7]
13.4
9.0
1,600 [755.1]
NOTE: This data includes DTC (Designated Test Combination) ratings and is for reference purposes only. A full listing of official ratings and system match- ups, along with downloadable certificates, can be accessed from the AHRI website: www.ahridirectory.org.
[ ] Designates Metric Conversions
11
GENERAL TERMS OF LIMITED WARRANTY
Ruud will furnish a replacement for any part of this product which fails in
normal use and service within the applicable period stated, in accordance with
the terms of the limited warranty.
For complete details of the Limited and Conditional Warranties, including applicable terms and conditions, contact your local contractor or the Manufacturer for a copy of the product warranty certificate.
Conditional Parts (Registration Required)……………………………Ten (10) Years
Before proceeding with installation, refer to installation instructions packaged with each model, as well as complying with all Federal, State, Provincial, and Local codes, regulations, and practices.
© 2024 Rheem Manufacturing Company. Ruud trademarks owned by Rheem Manufacturing Company. In keeping with its policy of continuous progress and product improvement, Ruud reserves the right to make changes without notice.
5600 Old Greenwood Road Fort Smith, Arkansas 72908 · www.ruud.com
125 Edgeware Road, Unit 1 Brampton, Ontario · L6Y 0P5 · ruud-canada.ca
PRINTED IN U.S.A. 5/24 QG FORM NO. A22-345
References
- Reliable Water Heaters, Tankless Water Heaters, and HVAC Systems for your home and business in Canada. - Ruud-Canada.ca
- ahridirectory.org
- Reliable Water Heaters, Tankless Water Heaters, and HVAC Systems - Ruud
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>