RUUD 106125 WL 13 Black Smart Flood Light Instruction Manual
- June 13, 2024
- RUUD
Table of Contents
106125 Ruud WL 13 Black Smart
Instruction Manual
106125 WL 13 Black Smart Flood Light
FLOOD LIGHT
incl. LED QL771785
1700im Module
1600im Lamp
20W LED Module
20W Lamp
220-240V~50Hz
3000K+6500K
CRI>80
30000 h
15000 ON/OFF
https://smartapp.tuya.com/tuyasmart
APP TUYA SMART
PREPARATION
- Connect the mobile phone fo the Wi-Fi network(2.4GHz band)
- Download “TUYA APP” Available in 10S and Android or scan the attached QR code.
If you are a new APP user, you can register by clicking the “Register” bunion
and following the registration instructions.
If you already have an account registered under “Toya”, you can access the
login page by clicking on the “Login with an existing username “button.
HOW TO CONFIGURE THE LIGHTING FIXTURE
Turn on and off the light for three fames, it will start blinking.
HOW TO CONNECT THE LIGHTING FIXTURE IF THE LIGHT BLINKES:
- Start the application, click “+ in the upper right comer of the screen, then click “Add Device”.
- Will start searching the nearby devices
- Click the orange button “Add” for confirm adding the light which is blinking.
- Select your Wi-Fi connection. Enter your Wi-Fi password and click “Confirm* to proceed the next step. the light will attempt for connect to your Wi-Fi network.
- After the light connects correctly, click the “Done® button. But first it would be convenient o “rename” the light as you wish.
- Users could adjust the different temperature color by sliding the round symbol on screen, dimmer the brightness from 1% to 100%, also could choose different scene.
Overall sizes
106125 20W LED
incl. LED Board: QL771785
220-240V~50Hz
This product contains a light source of energy efficiency class F| QR|
EAN
---|---|---
https://eprel.ec.europa.eu/qr/771785|
106125: 8718881144530
| Replaceable (LED only) light source by a professional.
---|---
|
Replaceable control gear by a professional.
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before
installing or using this product.
Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If inane doubt, consult a professional, taking local installation requirements info account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
| For indoor use only, where direct contact with water is impossible
---|---
| This icon indicates the level of water-proof and dust-proof
| Protection Class I: the fitting must be earthed
| Protection Class II: the fitting is doubled insulated and does not require
earthing
| Protection Class Ill: the fitting is low voltage
| Minimum distance from lighted objects (meters)
| The type of lamp and maximum size and wattage indicated in each lighting
unit must not be exceed; different items require different kind of light
sources with different bulb icons
| The armature is designed to work only with the indicated voltage. Different
items require different working voltage.
| The luminaire can be used in combination with a dimmer
| The reference light angle and light space of the luminaire
| This luminaire cannot be disposed together with normal domestic waste in
standard rubbish can, but you have to bring it to a staging area for
electrical waste
11.Take note of the symbols when connecting wires:
| L | Live conductor |
|---|---|
| **** | Earth conductor |
| M |
Fitting B.V.
Smaragdweg 52, 5527 LB Huppert, The Netherlands
www.qazqa.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>