HOERMANN HSE 1 BiSecur Hand Transmitter Instruction Manual

HOERMANN HSE 1 BiSecur Hand Transmitter

Product Information

The HSE 1 BiSecur and HSE 4 BiSecur are hand transmitters that operate on a frequency of 868 MHz. They come with a bicolor LED, a battery, and one or more buttons for transmitting signals. The hand transmitters can be used to learn and transmit codes for controlling garage doors, gates, and other devices.

Product Usage Instructions

Step 1: Safety Instructions

• Read the safety instructions carefully before using the hand transmitter. Pay special attention to the instructions on learning and operating the device.

Step 2: Unpacking

• Check that the package contains the hand transmitter and the battery isolator film.

Step 3: Product Description

• The hand transmitter has one or more buttons for transmitting signals and a bicolor LED for indicating the status of the device. The battery is located inside the device.

Step 4: Starting Up

• Remove the battery isolator film to activate the device. The hand transmitter is now ready for use.

Step 5: Changing the Battery

If the battery runs out, follow these steps to replace it:

• Open the casing of the hand transmitter.
• Remove the used battery.
• Insert a new battery of the correct type (as specified in the user manual).
• Close the casing of the hand transmitter.

Step 6: Learning and Transmitting Codes

You can use the hand transmitter to learn and transmit codes for controlling garage doors, gates, and other devices. To learn a code:

• Press and hold the button on the hand transmitter that you want to learn a code for.
• Press and hold the button on another hand transmitter that already knows the code.
• Release both buttons. The code has now been learned.

Step 7: LED Indicator

• The bicolor LED on the hand transmitter indicates the status of the device. A green light means that the device is working correctly, while a red light means that the battery needs to be replaced.

Step 8: Cleaning

• Clean the hand transmitter regularly with a soft cloth and mild detergent. Do not use abrasive or corrosive substances.

Step 9: Technical Specifications

• Refer to the user manual for technical specifications of the hand transmitter.

These instructions are divided into a text section and an illustrated section. They contain important information on the product, and especially safety instructions and warnings.

• Read through the instructions carefully.
• Keep these instructions in a safe place.

Dissemination, as well as duplication of this document and the use and communication of its content, are prohibited unless explicitly permitted. Noncompliance will result in damage compensation obligations. All rights reserved in the event of patent, utility model or design model registration. Subject to changes.

Safety instructions

Intended use

The HSE 1 / 4 BiSecur is a unidirectional transmitter for operators and their accessories. It can be operated via BiSecur radio and the fixed code 868 MHz. Other types of application are prohibited. The manufacturer is not liable for damage caused by improper use or incorrect operation.

Safety instructions for teach-in and operation

WARNING: Risk of injury during intended or unintended door travel

• Make sure that hand transmitters are kept away from children and can only be used by people who have been instructed on how the remote-controlled door system functions!
• If the door has only one safety device, only operate the hand transmitter if you are within sight of the door!
• Drive or walk through the door openings only when the door is in the Open end-of-travel position!
• Never stand in the door’s area of travel.
• Note that accidentally pressing a button on the hand transmitter can result in door travel.
• Make sure that no persons or objects are in the door’s area of travel when teaching in the radio system.

NOTE

• If there is no separate entrance, perform changes and extensions of radio systems while standing in the facility.
• After programming or extending the radio system, you have to perform a function check.
• Local conditions may affect the range of the radio system.

Scope of delivery

• Hand transmitter HSE 1 BiSecur or hand transmitter HSE 4 BiSecur
• 1 × 3 V battery, type: CR2032, lithium
• Operating instructions

Product Description

1. LED, bi-colour
2. Hand transmitter button or hand transmitter buttons
3. Battery
4. Battery insulation foil

Initial start-up

• After removing the battery insulation foil, the hand transmitter is ready for operation (see Figure 1 , 4 ).

Changing the battery

WARNING: Risk of explosion due to incorrect battery type

• Use only this battery type: 1 × 3 V battery, type: CR2032, lithium
• Remove the battery from the hand transmitter if it is out of use for a long period of time.

WARNING: Danger to life due to swallowing battery

• If the battery is swallowed, serious internal burns can occur within 2 hours and result in death.
• Keep batteries out of the reach of children!

Operation

Each hand transmitter button is assigned a radio code.

• Press the button of the hand transmitter whose radio code you want to transmit.
  • The LED is illuminated blue for 2 seconds.
  • The radio code is transmitted.

Learning behaviour of inherited radio codes

If the radio code for the hand transmitter button has been inherited from a hand transmitter and is being used for the first time, proceed as follows depending on the product: Garage door operator series 4, roller garage door operator series 2, receiver ESE BS HCP

• Press and hold the hand transmitter button until the LED flashes alternately in red and blue and the desired function is performed.

All other products

• Press the hand transmitter button a second time.

Learning and inheriting / transmitting a radio code

CAUTION: Danger of injuries due to unintended door travel

Teaching in a radio code

1. Hold hand transmitter A that is to be taught in the radio code to the left of hand transmitter B.
2. Press the hand transmitter button on hand transmitter B, whose radio code is to be inherited, and keep it pressed.
   • The LED is illuminated blue for 2 seconds and then goes out.
   • After 5 seconds, the LED alternates flashing in red and blue.
   • The hand transmitter sends the radio code.
3. Press the hand transmitter button on hand transmitter A that is to be taught in the radio code, and keep it pressed.
   • The LED is illuminated blue for 2 seconds and then goes out.
   • The LED flashes slowly in blue.
   • If the radio code is recognised, the LED flashes rapidly in blue.
   • After 2 seconds, the LED goes out.
4. Release the two hand transmitter buttons.
   • The radio code of the hand transmitter button has been taught in.

NOTE: You have 15 seconds to inherit / transmit the radio code. If inheriting / transmitting the code was not successful within this period of time, repeat the process.

Mixed operation / BiSecur and fixed code 868 MHz

If BiSecur radio is configured, mixed operation (BiSecur and fixed code 868 MHz) is possible. The hand transmitter can learn radio codes from older hand transmitters (grey hand transmitter with blue buttons or device designation HSD2-868) with fixed code 868 MHz.

Reset

Each hand transmitter button is assigned a new radio code by means of the following steps.

1. Open the hand transmitter housing.
2. Remove the battery for 10 seconds.
3. Press and hold a circuit board button.
4. Insert the battery.
   • The LED flashes slowly in blue for 4 seconds.
   • The LED flashes rapidly in blue for 2 seconds.
   • The LED is illuminated blue for a prolonged period of time.
5. Release the circuit board button.
   • All radio codes have been newly assigned.
6. Close the hand transmitter housing.

NOTE

• If the circuit board button is released prematurely, no new radio code is assigned.

Setting the fixed code 868 MHz

1. Carry out steps 1 – 4 of the device reset.
2. Keep the hand transmitter button pressed.
   • The LED slowly flashes in red for 4 seconds.
   • The LED flashes rapidly in red for 2 seconds.
   • The LED is illuminated red for a prolonged period of time.
3. Release the hand transmitter button.
   • The fixed code 868 MHz has been set.
4. Close the housing.

NOTE

• If the hand transmitter button is released prematurely, the BiSecur radio connection will remain active.
• For more information, visit www.hoermann.com

LED display

Blue (BU)

the teach-in procedure
Flashes slowly for 4 seconds, flashes rapidly for 2 seconds, illuminated for a prolonged period| Device reset is being performed and completed

Red (RD)

battery should be replaced soon
Flashes twice; following this, the radio code is no longer transmitted| The battery must be replaced immediately

Blue (BU) and Red (RD)

Cleaning

ATTENTION

• Damaging the hand transmitter by faulty cleaning
• Only clean the hand transmitter with a clean, soft cloth.

NOTE

• Regular use of disinfectants can cause damage to the hand transmitter.

Disposal

• Dispose of the packaging sorted by materials
• Electrical and electronic devices must be returned to the appropriate recycling facilities.
• Dispose of the batteries separately. Each consumer is legally required to leave batteries with a collection point in their community, their district, or with a trader.

Technical data

Hand transmitter HSE 1 / 4 BiSecur

• Model: HSE1-868-BS /HSE4-868-BS
• Frequency: 868 MHz
• Transmitting power: max. 10 mW (EIRP)
• Power supply: 1 × 3 V battery, type: CR2032, lithium
• Perm. ambient temperature: 0 °C to +50 °C
• Max. humidity: 93%, non-condensing
• Protection category: IP 20
• Dimensions (W × H × D): 28 × 70 × 14 mm

EU and UK Declaration of Conformity

Hörmann KG Verkaufsgesellschaft and Hörmann UK Ltd. herewith declares that the radio equipment type hand transmitter HSE 1 /4 BiSecur complies with the EU Directive 2014/53/EU and the UK Regulations 2017 No. 1206. The complete text of the EU Declaration of Conformity and of the UK Declaration of Conformity can be found on the following website: www.hoermann- docs.com/277107

HSE 1 / 4 BiSecur

• Hörmann KG sales company
• Upheider Weg 94 – 98 33803 Steinhagen Germany

4553843 B0

References

• hoermann-docs.com/277107

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>