LINDY 32104 HDMI 10.2G VGA DVI EDID Emulator User Manual
- June 3, 2024
- LINDY
Table of Contents
EDID Recorder
HDMI 10.2G / VGA / DVI EDID Emulator
User Manual
32104 HDMI 10.2G VGA DVI EDID Emulator
No. 32120 EDID Recorder
32104 HDMI 10.2G EDID Emulator
32121 VGA EDID Emulator
32122 DVI EDID Emulator
lindy.com
© LINDY Group – THIRD EDITION (July 2021)
Safety Instructions
Please read the following safety information carefully and always keep this
document with the product.
To reduce risk of fire, electric shocks or damage:
- Do not open the product. There are no user serviceable parts inside.
- Qualified servicing personnel must only carry out any repairs or maintenance.
- Do not expose the product to water or places of moisture.
- This product is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Introduction
Thank you for purchasing from the EDID emulator range. This product has been
designed to provide trouble free, reliable operation. It benefits from both a
LINDY 2 year warranty and free lifetime technical support. To ensure correct
use, please read this manual carefully and retain it for future reference.
The Lindy EDID recorder is a useful solution for solving a variety of EDID
compatibility issues that may occur when connecting mixed displays or using
splitters, extenders or switches. This recorder copies a connected HDMI, VGA
or DVI display’s EDID and stores it, to then be repeatedly used with Lindy’s
range of EDID emulators (32104, 32121 and 32122). These emulator’s also
possess pre-set EDIDs to consistently provide hassle-free EDID compatibility.
Package Contents
32120
- EDID Recorder
- Multi-country PSU (UK, EU, US & AUS), 5VDC 2A, Barrel Size: 3.5/1.35mm
- This manual
32104, 32121-2
- HDMI, VGA or DVI EDID Emulator
- This Manual
Features
VGA (32121), DVI (32122) & HDMI (32104) Emulator
- Contains pre-set EDID/DDC Data for commonly used resolutions and refresh rates (see following page for details)
- Integrated flash memory allows cloned EDID/DDC Data to be written and stored
- Powered via VGA/DVI/HDMI interface
EDID Recorder (32120)
- Clones and stores EDID/DDC Data from VGA, DVI & HDMI (using Emulator above) displays
- Writes EDID/DDC Data to LINDY EDID/DDC Emulators
- Powered via Multi-country PSU
Installation
Example for use with extender:
Example for use with a switch:
**EDID Emulators**
If you are using the EDID/DDC Emulator Adapters in isolation they may simply
be installed as shown in the diagrams previous, by connecting the Male
interface of the Emulator to the graphics card. The preset values (see table)
will then be available via your computer’s graphics/resolution settings.
32104 — Emulatore HDMI 10.2G| 32121 — Emulatore VGA| 32122 —
Emulatore DVI
---|---|---
Risoluzione| Freq. refresh| Risoluzione| Freq. refresh| Risoluzione| Freq.
refresh
640 x 480p| 60/72/75Hz| 1024×768| 75Hz| 640×480| 60Hz/67Hz/72Hz/75Hz
720 x 400p| 60Hz/70Hz| 1152×864| 75Hz| 720×400| 70Hz
720 x 480i| 60Hz| 1280×720| 60Hz| 800×600| 60Hz/72Hz/75Hz
720 x 576p| 50Hz| 1280×768| 60Hz| 832×624| 75Hz
720 x 576i| 50Hz| 1280×960| 60Hz| 1024×768| 60Hz/70Hz/75Hz
800 x 600p| 56/60/72/75Hz| 1280×1024| 60Hz / 75Hz| 1152×864| 75Hz
832 x 624p| 75Hz| 1366×768| 60Hz| 1152×870| 75Hz
1024 x 768p| 60/70/75Hz| 1440×900| 60Hz| 1280×720| 60Hz
1280 x 800p| 60Hz| 1600×900| 60Hz| 1280×960| 60Hz
1280 x 720p| 50/60Hz| 1600×1200| 60Hz| 1280×1024| 60Hz/75Hz
1152 x 864p| 75Hz| 1680×1050| 60Hz| 1440×900| 60Hz
1152 x 870p| 75Hz| 1920×1080| 60Hz| 1600×1200| 60Hz
1280 x 1024| 60/75Hz| 1920×1200| 60Hz| 1680×1050| 60Hz
1280 x 960p| 60Hz| | | 1920×1080| 60Hz
1440 x 900•| 60Hz| | | 1920×1200| 60Hz
1600 x 1200p| 60Hz|
1680 x 1050p| 60Hz
1920 x 1080i/p| 50/60Hz
1920 x 1200p| 60Hz
2560 x 1440p| 60Hz
3840 x 2160p| 24/30Hz
EDID Recorder
Cloning Procedure
- Please ensure the display is switched off before starting the process
- Switch the recorder to Copy
- To clone the EDID/DDC data of a display you will need to attach the recorder to your monitor using a HDMI, VGA or DVI cable, please ensure the display is now switched on
- Connect the power supply to the DC jack of the recorder
- The Power LED will illuminate Blue. This indicates that the recorder is learning the display’s EDID.
- The Pass LED will then illuminate Green. This indicates that the display’s EDID has been learnt and stored successfully.
Re-write EDID to the Emulator
Please Note: Writing cloned EDID/DDC data to the Emulators will overwrite
the pre-set EDID/DDC data.`
- Switch the recorder to Copy
- Connect the HDMI, VGA or DVI Emulator to the corresponding port of the recorder.
- Connect the power supply to the DC jack of the recorder
- The Power LED will illuminate Blue followed by the Write LED flashing Green. This indicates the display’s EDID is being copied onto the Emulator.
- The Write LED will illuminate a solid green followed by the Pass LED flashing green. This indicates the re-writing of the EDID to the Emulator has been successful.
The recorder can also be used to reset the Emulator’s to their pre-set default
EDID’s.
Reset to Pre-set EDID Procedure
- Switch the recorder to EDID
- Connect the HDMI, VGA or DVI Emulator to the corresponding port of the recorder.
- Connect the power supply to the DC jack of the recorder
- The Power LED will illuminate Blue and the EDID LED will illuminate Orange, followed by the Write LED flashing Green. This indicates that the corresponding emulator’s default EDID is being re-wrote to the Emulator.
- The Write LED will illuminate solid Green, followed by a flashing green Pass LED. This indicates the default EDID reset has been successful.
Please note only 1 Emulator can be used at any one time
Tested to comply with FCC standards.
For home and office use.
No. 32120-2, 32104
3rd Edition, July 2021
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>