LINDY 43329 2 Port USB 3.2 Gen 1 Type C Bi Directional Switch User Manual
- June 3, 2024
- LINDY
Table of Contents
LINDY 43329 2 Port USB 3.2 Gen 1 Type C Bi Directional Switch User Manual
Introduction
Thank you for purchasing the 2 Port USB 3.2 Gen 1 Type C BiDirectional Switch. This product has been designed to provide trouble free, reliable operation. It benefits from both a Lindy 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy 2 Port USB 3.2 Gen 1 Type C Bi-Directional Switch allows up to 2
users to share a USB Type C peripheral without the need to repeatedly swap
cables or set up complicated network sharing software. The active computer
port can be selected by push button. Alternatively the switch provides access
to two devices from a single laptop, tablet or mobile phone, the active device
is then selected by the push button.
The switch is ideal for sharing a USB device between two computers in a small
office environment or for accessing two devices from one computer. The support
of DisplayPort Alternate mode via the USB Type C ports also allows the
connection of displays for video transfer at resolutions up to 4K.
Package Contents
- 2 Port USB 3.2 Gen 1 Type C Bi-Directional Switch
- USB Type A to DC (3.5/1.35mm) power cable
- This manual
Features
- Connect a single USB device to 2 computers or access two devices or displays from one computer with the press of a button
- USB 3.2 / 3.1 Gen 1 / USB 3.0 Standard
- Interfaces: 2 x USB Type C (Female), 1x USB Type C (Male) – bi-directional
- Supports DisplayPort Alternate Mode
- Supports data transfer rates up to 5Gbps and video resolutions up to 4K 3840×2160 60Hz
- Includes a USB Power Cable for connection to a computer or a power supply
Installation & Operation
Turn off the computers and devices you intend to connect before continuing with the installation. Connect the USB Switch to the device(s) and computer(s) with suitable USB cables of max. 1m length (sold separately). Power up your computer(s) and device(s), Plug & Play installation will start immediately.
The 2 Port USB 3.2 Type C Switch supports USB Power Delivery PD 3.0, which allows charging via a connected USB Type C power supply. The switch is supplied with a USB Type A to DC cable for power which can be attached to a second USB port or to a power supply.
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. Operation is subject
to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired
WEEE (Waste of Electrical and Electronic Equipment), Recycling of
Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process.
Tested to comply with FCC standards.
For home and office use.
Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: [email protected]
T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
[email protected]
T: +44 (0) 1642 754000