horizont AS180 12 V Electric Fence Energizer Installation Guide

September 20, 2024
Horizont

horizont AS180 12V Electric Fence Energizer

Specifications

  • Solar panel: Foldable design
  • On-/Off-switch for control
  • Ground connection with ring terminal (No. 9)
  • Fence connection with ring terminal (No. 10)
  • Twist knobs for adjustments
  • Mounting slots for installation
  • Battery box for power storage
  • Battery charge socket for recharging
  • Ground connection leads to grounding
  • Fence connection lead for fencing
  • Battery charger included
  • Mounting bracket for easy setup

FAQs

Q: How do I know if the battery needs charging?

A: The battery charge socket (No. 8) will indicate when the battery needs charging. You can also use the battery charger (No. 11) included in the package to recharge the battery.

Q: Can the solar panel be adjusted for better sunlight exposure?

A: Yes, the foldable design of the solar panel allows you to adjust it for optimal sunlight exposure, ensuring efficient charging of the battery.

Installation guide

Please read through it before installation. Please read the safety guidelines leaflet

Overview

  1. Fold-out solar panel
  2. On-/ Off-switch
  3. Ground connection
  4. Fence Connection
  5. Twist knobs
  6. Mounting slots
  7. Battery box
  8. Battery charge socket
  9. Ground connection lead
  10. Fence connection lead
  11. Battery charger
  12. Mounting bracket

Assembly

NOTE : The units are ready for use immediately after unpacking. However, we recommend charging the battery for 12 hours before first use.

CABLE CONNECTIONS

Connect the ring terminals of the ground (No. 9) and fence (No. 10) connection cables to the respective colored border nuts (No. 3 and 4) to connect them to the unit. Then connect the clips to the conductor material and to the ground respectively.

START-UP

Press the button (No.2) on the frontpanel to turn the unit on and off. The switch will light green in time with the current pulse. The switch will light red if the battery needs to be charged.

CHARGING THE BATTERY

To charge the battery, use the enclosed charger (No.11) and the connector provided for it (No.8). It is especially important to continue charging the battery if the device is not in use and is stored out of the sun.

ACCESS TO THE BATTERY :

If you need to access the battery, you can open the battery container usingthe knobs (No.5). To remove the battery, you must first loosen the clamp connections.

MORE INFO

To obtain the safety instructions or the complete operating instructions, please scan the QR codes shown

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals