Bang Olufsen Beolab 8 App User Guide
- June 1, 2024
- bang olufsen
Table of Contents
Bang Olufsen Beolab 8 App
DOWNLOAD BANG & OLUFSEN APP
- To set up your product, download the Bang & Olufsen App from the Google Play Store or Apple App Store.
- From this app you can set up and get the most out of your Beolab 8.
- When you first start the Bang & Olufsen App, you will be asked to create a user account.
- To set up your speaker, click to add a new product. If you already have an account this can be found under settings.
GETTING STARTED
- Unpack Beolab 8, connect it to the mains with the enclosed power cord and place it in its position.
DAILY USE
Microphone
- To disconnect your microphones rather than temporarily mute them, toggle the microphone switch at the back of the speaker inside the well.
PRODUCT INDICATOR
The light indicator shows the status of the product.
Action | Meaning |
---|
White
Solid| Product is powered on
Blue
Solid (5 sec)| Connected/paired
Pulsing| Open for pairing
Red
Solid| Static error, please call service
Flashing| Transient error, i.e. overheating, Qi charging error
Amber
Solid| Not connected to any Bluetooth device or network
Flashing| Ready for network setup
Pulsing| Connecting to network
Green
Pulsing| Software update in progress
FACTORY RESET
- You can restore factory settings by pressing and holding the previous(<) and next(>) buttons on the top plate at the same time for 8 seconds.
- Your speaker will begin the reset process and after approximately one minute, your Beolab 8 will be ready for first-time set-up again.
CONNECTIONS
- Remove the cover on the rear of your Beolab 8
- Connect the relevant cables, such as the Ethernet cable in the connection well.
Placement of Compliance Label
Specifications
- Product Name: Beolab 8
- Manufacturer: Bang & Olufsen
- Connectivity: Bluetooth
- Power Source : Mains power
- Controls : Play/pause, track switching, volume control
- Additional Features : Microphone, Indicator lights
Frequently Asked Questions (FAQ)
Q: How do I download and set up the Bang & Olufsen App?
A: You can download the Bang & Olufsen App from the Google Play Store or
Apple App Store. Follow the on-screen instructions to set up your account and
add a new product.
Q: How can I tell if my speaker is connected via Bluetooth?
A: If the indicator light is solid blue for 5 seconds, your speaker is
connected or paired and ready for use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>