Lovcour X6 Bone Conduction Swimming Headphones Instructions
- June 16, 2024
- Lovcour
Table of Contents
Lovcour X6 Bone Conduction Swimming Headphones
Specifications
- Version: 5.3
- Distance: Bluetooth 10 meters
- Input: 5V/180mA
- Battery: 230mAh
- Play Time: More than 5 hours at 70% volume
- Agreement: a2dp1.3.2avctp1.4avdtp1.3avrcp
Charge
The headphone uses a built-in rechargeable battery. For the first use, it
is recommended to fully charge the battery. If the voice prompts low battery
during use, the battery is low and needs to be charged.
- Connect the charging cable to the headphone’s magnetic charging port.
- Allow the headphone to charge for approximately 2 hours.
- The charging status indicator will show a red light while charging and a blue light when fully charged.
Music Play
To play music with the headphone, follow the instructions below:
- To increase volume, click the “+” button.
- To reduce volume, click the “-” button.
- To play the next song, click and hold the “+” button.
- To play the previous song, click and hold the “-” button.
- To pause or resume music playback, click the play/pause button.
Answering Calls
To answer an incoming call with the headphone, follow the instructions
below:
- Short press the power button to answer the call.
- To decline a call, long press the power button for 1 second.
- To hang up during a call, long press the power button for 1 second.
Bluetooth Pairing
To pair the headphone with a Bluetooth device, follow the instructions
below:
- Ensure the headphone is in the off state.
- Press and hold the power button for 3 to 5 seconds until the light starts flashing red and blue.
- Enable Bluetooth on your device (e.g., cell phone or computer) and search for the device named “X6”.
- Select “X6” from the search results to pair and connect.
Note : To switch between Bluetooth and memory mode, double click the power button.
AI Intelligent Voice Control
If your phone supports voice wake-up function, you can use AI intelligent
voice control with the headphone. Follow the instructions below:
- In the Bluetooth connection state, long press the power button for 1 second to wake up.
- After hearing the tone, you can voice manipulate your phone without operating it directly.
Note: The headphone will automatically default to Bluetooth mode upon power on.
Song Download
You can download songs to the headphone by connecting it to a computer
using the original charging cable. Follow the steps below:
- Connect the original charging cable to both the computer and the headphones.
- Access the headphone as a USB device on the computer.
- Copy songs from the computer to the headphone.
FAQ
-
Q: How long does it take to fully charge the headphone?
A: It takes approximately 2 hours to fully charge the headphone. -
Q: How long is the play time of the headphone?
A: The headphone can play music for more than 5 hours at 70% volume. -
Q: What is the Bluetooth distance range of the headphone?
A: The Bluetooth range of the headphone is up to 10 meters.
Bone Conduction Bluetooth Earphon
Instructions for usage and warranty
Headphone introduced
- Indicator light
- Magnetic suction charging port
- Volume “-” button
- On/off button
- Volume “+” button
- Microphone
Charge
- The headphone uses a built-in rechargeable battery , the first use of the headphone must be fully charged to the battery .In use , if the voice promps “low battery”, the battery is low, and you need to charge the headphone.
- The charging cable should be connected to the headphone magnetic charging port , about 2 hours to be fully charged. The charging status indicator’s red light is always on, full charge is always on the blue light.
- Note : Magnetic charging has a positive and negative polarity correspondence, mutual adsorption can be charged normally, and mutual repulsion will not charge or even cause a short circuit.
- Warning : The rechargeable battery of this product must be disposed of properly for recycling. Please do not put the battery into the fire,so as not to cause an explosion .
Operating instruction
Music Play
Answer the phone
Operating instruction
How to pair with Bluetooth
-
Bluetooth pairing:In the off state, press and hold
the power button for 3 to 5 seconds, the light into the red and blue flashing state, and then enter the pairing state. Turn on the Bluetooth (cell phone/computer) on the device and search for he device name ” X6 “, click the device” X6 “to pair and connect. -
Bluetooth / MP3 mode switching:Double click the power button (multi-function composite button) to freely switch between Bluetooth and memory mode.
-
Emphasis: The power on automatically default Bluetooth mode status.
Song download: Connect the original charging cable to the computer and headphones, you can read the USB, and copy the computer songs to the USB. -
Warm tip: Bluetooth headphone will automatically search for the latest device to connect after powering on. When the Bluetooth headphone and the device deviate from the effective distance of 10 meters (33 feet), the Bluetooth headphone will be disconnected from the device, and they will be reconnected only when they are placed within 10 meters again, if the Bluetooth headphone is disconnected from the device for too long, then you need to click the multi-function button on the Bluetooth headphone to reconnect.
AI intelligent voice control
(Phone needs to support voice wake-up function)
Description : In the Bluetooth connection state,long press the power on button for 1 second to wake up, after hearing the tone you can voice manipulate the phone, save the time to operate the phone, fast and intelligent.
Indicator
Product parameter
- Charging time: About 2 hours * Version: 5.3
- Distance: Bluetooth 10 meter Input: 5V/180mA Battery: 230mAh
- Play: More than 5 hours@/0% volume * Agreement: a2dp1.3.2\avctp1.4\avdtp 1.31 avrop 1.6.2 hfp 1.8 Ispp 1.21rcomm 1.1 pmp 1.3 hid 1.1.11 sdpcore5.3|12cap core 5.3
- Music format support: WAV,FLAC, WMA,AAC,MP3, ADE NAMA
Maintenance and cleaning
- The headphone can not soak seawater/salt water for a long time, they use fresh water to rinse and dry.
- Charging electromagnetic suction part is easy to corrode.
- If not used for a long time, please at least once a month full charge.
- Please do not disassemble any parts of the product, such as the discovery of product defects immediately stop using the product, and contact the seller after-sales service.
- After each campaign, please wipe the surface of the headphone water, especially the location of the filling electromagnetic suction, to deal with the cleaning in time to prevent sweat, and salt water corrosion charging port, affecting the life of the product.
- Keep the product away from fire, heat, freezing sources, chemicals, violent impact disassembly and extrusion products are strictly prohibited .
- Please use a charging head with an output of 5V1A or less.
Certificate of conformity
Product warranty card
This card is a product warranty certificate, please keep it properly
Product maintenance records 