3500SS Smart Site Time Clock and Document Stamp

“`html

Specifications:

• Model: 3500SS/3600SS/3700SS

• Employee Capacity: Unlimited

• Features:

  • Red LED guide

  • Date stamp & up to 2 lines (16 characters per line)

  • Alphanumeric custom type

  • 14 Preset Messages for stamping time sensitive documents

  • Sequential numbering up to 9999

  • Adjustable document edge

  • Buzzer

  • Languages: English, Spanish & French

  • Printing Formats: Time, date & day of week (AM/PM or
    Military Time Format), Date & Time (AM/PM, Military, Military
    Hundredths, Military Tenths)

  • Dot matrix printing

  • Security Features: Short months, Leap Year & Daylight
    Savings Time, Data & settings safeguard for up to 7 days
    without power, Security lock

  • Warranty: 1-Year manufacturer’s limited warranty

Product Usage Instructions:

Set Up:

1. Remove time clock from carton & place on a flat, level
   surface.

2. Unlock & remove top cover.

3. Connect power adaptor in port located behind display screen
   & plug unit into AC wall outlet.

Wall Mounting:

1. Select a location convenient to employees clocking IN &
   OUT. Ensure the power outlet is within 5 feet of mounting
   location.

2. Use masking tape to hold mounting template on the wall,
   positioning it so the bottom of the time clock is approximately 45
   inches from the floor.

3. Drill holes using the template as a guide.

4. Remove the template from the wall and install #10 screws with
   plastic anchors.

FAQ:

Q: How do I change the language settings on the SmartSiteTM

Time Clock & Document Stamp?

A: To change the language settings, navigate to the menu options
using the control panel and select the desired language from the
available options.

Q: Can I use my own custom messages for document stamping?

A: Yes, the SmartSiteTM Time Clock & Document Stamp allows
for custom alphanumeric type messages. You can input your own
messages for stamping on documents.

“`

3500SS/3600SS/3700SS
Smart|SiteTM Time Clock & Document Stamp User Guide

3700

stamp

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
TABLE OF CONTENTS
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . 1 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CONTENTS 3 . . . . . . . . . . . . . . . . . . . . . . . . . . GETTING STARTED & INSTALLATION . . . . . . . . . . . . . . . 4 PROGRAMMING & FEATURES SET UP & BUZZERS . . . . . . . . 4-5 MESSAGES & COUNTER MODE . . . . . . . . . . . . . . . . . 6-7 BUZZERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRINTING MODES. . . . . . . . . . . . . . . . . . . . . . . 9 ADJUSTING DOCUMENT EDGE . . . . . . . . . . . . . . . . . 9 USING TIME CLOCK . . . . . . . . . . . . . . . . . . . . . . 10 TIME CARDS . . . . . . . . . . . . . . . . . . . . . . . . . . 11 TIME CARD PRINT FORMAT . . . . . . . . . . . . . . . . . . . 11 PRINTING CUSTOM MESSAGES (3600SS) . . . . . . . . . . . . 12 REPLACING RIBBON CARTRIDGE . . . . . . . . . . . . . . . . 13 MASTER RESET . . . . . . . . . . . . . . . . . . . . . . . . 14 FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . 14 WARRANTY & CUSTOMER SUPPORT . . . . . . . . . . . . . . 15 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . 16 MOUNTING TEMPLATE 3500SS/3600SS . . . . . . . . . . . . . 17 MOUNTING TEMPLATE 3700SS . . . . . . . . . . . . . . . . . 18

1 TABLE OF CONTENTS

888.479.7264

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
PRODUCT OVERVIEW
Thank you for choosing a 3500SS/3600SS/3700SS SmartSiteTM Time Clock & Document Stamp! The 3500SS/3600SS/3700SS are our most versatile time clocks, ready to perform employee time tracking, document stamping & preset message stamping. The 3600SS features custom message stamping & sequential page numbering. These clocks feature the exclusive patent pending SmartSiteTM viewing guide and are equipped with a red LED alignment guide to ensure perfectly aligned time card punches & document stamping time after time.
The 3500SS/3600SS/3700SS is able to punch employees In & Out and stamps time sensitive documents using one of 14 preset messages. The 3600SS also stamps custom messages with up to 2 lines of alphanumeric type and stamps sequential page numbering up to 9999 consecutive stamps using semi-automatic or manual stamping. These clocks feature an adjustable document edge to accommodate any size document. Simple set-up, simple operation & simple ribbon changes make these time clocks a favorite with small business!
Please read through this User Guide for simple set-up & operation.
TIME CLOCK & DOCUMENT STAMP : FEATURES

Employee Capacity Alignment Custom Type (3600SS) Preset Messages Counter Mode (3600SS) Loading Ribbon Ink Audio Signal (3600SS) Language Printing Printing Display Printing Format Printing Automatic Time Reset Battery Back-Up Tamper- Proof Warranty

Unlimited
SmartSiteTM Red LED guide Date stamp & up to 2 lines (16 characters per line) alphanumeric custom type 14 Preset Messages for stamping time sensitive documents Sequential numbering up to 9999
Side, adjustable document edge
Black
Buzzer
English, Spanish & French
Semi-automatic or manual Time, date & day of week (AM/PM or Military Time Format) Date & Time (AM/PM, Military, Military Hundredths, Military Tenths) Dot matrix
Short months, Leap Year & Daylight Savings Time Safeguards data & settings for up to 7 days without power Security lock protects against costly time theft
1-Year manufacturer’s limited warranty

pyramidtimesystems.com

PRODUCT OVERVIEW & FEATURES 2

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
CONTENTS

3500SS/3600SS/3700SS
User Guide
Smart SSeitleUlaTMdsRoerergDiesGtDruaodcioudrmeDeentToisempo Y
Horloge pointeuse et dateur de document Smart SiteTM

3500SS/3600SS/3700SS SmartSiteTM Time Clock &
Document Stamp

WALL MOUNTING TEMPLATE MODEL 3600SS

Position this line approximately 45 inches from floor
I2244
Mounting Template (see inside back cover)

3700 ssttamapmp
pyramidtimesystems.com
3500SS/3600SS/3700SS User Guide
CH751 CH751
Security Keys (2)

WHAT YOU WILL NEED TO MOUNT ON THE WALL

35100-10 Time Card (25)
Power Adaptor

Tape Measure

Pencil

Screw Driver

Power Drill (Optional)

10 Screw (2) (2) Plastic Anchors

KNOW YOUR SERIAL #

IMPORTANT:
Please write down serial # located on bottom of time clock before mounting.
Write your serial # here:

Model of your Time Clock & Document Stamp:

3500SS 3600SS 3700SS

Serial number is located on bottom
of time clock

Model 3X00SS Time Clock & Document Stamp
US PATENT NO. 9,358,811 B1

UL LISTED POWER SUPPLY

INPUT: 12.5V

1.5A

45 Gracey Avenue Meriden, CT 06451 888.479.7264 www.pyramidtimesystems.com
000000000

Made in China L4988

q q

3 CONTENTS

888.479.7264

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
SET UP
1 Remove time clock from carton & place on a flat, level surface.
2 Unlock & remove top cover.
3 Connect power adaptor in port located behind display screen & plug unit into AC wall outlet.
WALL MOUNTING
1 Select a location convenient to employees clocking IN & OUT. Be sure power outlet is within 5 feet of mounting location.
2 Use masking tape to hold mounting template on wall, making certain template is positioned so bottom of time clock is approximately 45 inches from floor.
3 Drill holes using template as a guide. 4 Remove the template from the wall and install #10
screws (not included), leaving approximately 3/16 inch of the screw exposed.
5 For sheetrock walls, use the plastic anchors. 6 Hang the time clock on the wall, aligning keyholes
on the rear with the screw heads. Press downward on the time clock until it lowers onto the screws. 3700SS: tighten the screws after hanging the clock.
7 Plug unit into AC wall outlet.

PROGRAMMING
Use key to unlock and remove cover.
1 Lpoc/ateapnrdoqgra/mm.ing buttons labeled SELECT,
2 Press SELECT and using p/qscroll to display desired feature is (see chart on page 5).
3 After display feature is changed, press SELECT button to save change. Repeat this step for other features until you cycle back to main display showing TIME/DATE.
4 Press p/or q/to scroll through feature
options.

p/

q/

To change or set feature, press SELECT button until desired feature is displayed.
Use p/ (UP) or q/(DOWN) buttons to change feature or move cursor.
After display feature is changed, press SELECT button to change other features & to return to the main display.
42643 Rev.H

p/ Moves cursor LEFT in
Custom Messaging (3600SS)
q/ Moves cursor RIGHT in
Custom Messaging (3600SS)

pyramidtimesystems.com

GETTING STARTED & PROGRAMMING 4

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS

3500SS/3600SS/3700SS TIME CLOCK & DOCUMENT STAMP:FEATURES SET UP

FEATURE (SELECT) Set Language
Set Date Format
Set Year

DISPLAY LANG
DATE FMT
SET YEAR

DEFAULT SETTINGS ENGLISH
MMDDYY
2021

OPTIONS (SCROLL pq)
ENGLISH, French (FRANCAIS), Spanish (ESPANOL)
MM/DD/YR (USA), DD/MM/YR (EURO), YY/MM/DD
DISPLAYED YEAR +/- 1 Year

Set Month

SET MONTH

JAN

DISPLAYED MONTH +/- 1 Month

Set Date

SET DAY

1

DISPLAYED DATE +/- 1 Day

Set Daylight Savings DAYL’T SAV Time (DST) Rule

Set Format
Set Printed Time Format

DSPLY FMT PRINT FMT

Set Print Direction

PRINT DIR

Set Mode

MODE

Setup Preprogrammed message
Setup Cutom Message

SET FMT MSGS CST MSGS (1,2)

USA
AM/PM AM/PM
RIGHT AUTO NO/DATE TIME NOT USED

USA: USA DST: Begins 2nd SUN of MAR, Ends 1st SUN of NOV 2am EURO: European DST: Begins Last SUN of MAR, Ends Last Sun of OCT 1am OTHER: Set a custom DST Rule.1 2am OFF: No adjustment for DST. AM/PM: 12 Hour, MIL: Military, 24 Hour
AM/PM: 12 Hour (e.g. 3:30PM) MIL: Military, 24 Hour (e.g. 15:30) ATAAP: Military, 24 Hour, Minutes expressed in hundredths of one hour (e.g. 15.50) 24H.1: Military, 24 Hour, Minutes expressed in tenths of one hour (e.g. 15.5)
Right = Print in right direction on time card. Left = Print in left direction on time card. SEE PRINTING MODES PAGE 9
SEE PREPROGRAMMED MESSAGES PAGE 6
SEE CUSTOM MESSAGING, PAGE 7 (3600SS Only)

Schedule a Buzzer Event (3600SS)
Set Hour
Set Minutes

SET EVENT

NO

SET HOUR

12AM

SET MINUTES 0

NO: No event(s) scheduled. YES: Schedule event(s) SET EVENT #1-50, Page 8
DISPLAYED HOUR +/- 1 Hour
DISPLAYED MINUTE +/- 1 Minute

1 SELECT DAY’L SAV=OTHER. SCROLL & SELECT START & END SUNDAY (Available options are the 1st, 2nd, 3rd, 4th and last Sunday of each month). Remember: The number of weeks in a given month changes each year. You will have to reprogram your custom DST if either the START or END date falls on the last day of the month.

5 FEATURES SETUP

888.479.7264

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS

MESSAGES & COUNTER MODE
The 3500SS/3600SS/3700SS function as a document stamp and are preprogrammed with 14 common message formats. In addition, the 3600SS allows you to enhance each of these preprogrammed messages with up to two lines of customizable print, or with a sequential counter.
PREPROGRAMMED MESSAGES
1 In the FMT=DATE TIME (3500SS/3700SS) menu or the SET FMT MSGS (3600SS) menu, press p(UP) or q(DOWN) to choose “YES”.
2 Press SELECT. 3 Press p(UP) or q(DOWN) to scroll through preprogrammed messages. (see chart
below)1
4 Press SELECT to choose desired message2 & advance to next menu.
5 If no custom message is desired “CST MSG1=NOTUSED”, press SELECT, or to program a custom message “CST MSG1”, follow steps on page 7. (3600SS Only)
6 If custom message is not desired “CST MSG2=NOTUSED”, press SELECT, or to program a second custom message “CST MSG2”, follow steps on page 7.

SET FORMAT MESSAGES (SET FMT MSGS)

DISPLAY FMT=DATE TIME (Default Settings) FMT=DATE YR TIME FMT=DATE YR APVD FMT=DATE YR FAXD FMT=DATE YR FILE FMT=DATE YR IN FMT=DATE YR OUT FMT=DATE YR PAID FMT=DATE YR RCVD FMT=DATE YR SENT FMT=DATE YR ORIG FMT=DATE YR VOID FMT=DATE YR USED FMT=DATE YR CMPL

EXAMPLE JUL 12 07:46PM JUL 12 ’20 07:46PM JUL 12 ’20 APVD JUL 12 ’20 FAXD JUL 12 ’20 FILE JUL 12 ’20 IN JUL 12 ’20 OUT JUL 12 ’20 PAID JUL 12 ’20 RCVD JUL 12 ’20 SENT JUL 12 ’20 ORIG JUL 12 ’20 VOID JUL 12 ’20 USED JUL 12 ’20 CMPL

1By default, clock will print DATE TIME format if no message is selected. 2Selected preprogrammed message will print first (date stamp on 3600SS).
pyramidtimesystems.com PREPROGRAMMED & CUSTOM MESSAGES 6

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS

NAVIGATE TO CUSTOM MESSAGES (3600SS)
1 Set: SET FMT MSGS = YES, then press SELECT

2 Set: (your) FMT, then press SELECT

3 Set: CST MSG1 = USE, then press SELECT

Display will show 4 lines:

Line A: NUMBERS, Space

and Arrow q

Line Line

B: C:

CAPITAL LETTERS, Space CLR (clear), DONE, COUNT

and

aAnrdroAwrrpows

q

p

Line D: CUSTOM MESSAGE 1 (up to 16 places) (Blinking place to set)

4 (LEFT) or (RIGHT) moves character to dark back ground in each line (right/
left).
5 The arrow with a dark background moves the cursor to other line (A,B,or C) after pressing SELECT.
6 The character (number/letter/space) with a dark background is registered in a blinking space of CUSTOM line after pressing SELECT and the next space starts to blink.
7 If you make a mistake set cursor to “CLR” and press SELECT to clear last character or hold SELECT (3 sec) to clear all characters and then start again.
8 To set whole CUSTOM MESSAGE 1 for Counter Set for “COUNT” and press SELECT.
9 To finish a message move the cursor “DONE” to dark background and press SELECT. 10 CST MSG2 = NOT USED – apply the same roles as CST MSG1.

NOTE: IF “CST MSG1=NOT USE”, the clock setting goes to “SET EVENT”. Then “CST MSG1=NOT USE” and “CST MSG2=USE” will not be printed. The counter “CST MSG2” will be incrementing internally (when it was set “USE” and “COUNTER”).
COUNTER MODE (3600SS)
The counter mode is activated when SELECT “” is in custom message position (see step 8 & 9 above). Every “DATE STAMP” is counted.
An increasing number (1,2,3,-9999) will print on the second or third time you print following “date stamp” or “custom message” (during a three second period).Once 9999 is reached, numbers will reset automatically back to 1.

NOTE: The counter is reset when set “CLR” and press SELECT then set “COUNT” and press SELECT again.
1You may not move the cursor of custom message backwards. (see step 7 above) 2It is recommended to reset time after creating custom messages.

7 CUSTOM MESSAGES & COUNTER MODE

888.479.7264

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS

SET EVENT USING BUZZER (3600SS)
The 3600SS Time Clock & Document Stamp has an internal buzzer to alert workers of start times, breaks, lunch and dismissal times.

MENU : SET EVENT pq SCHEDULE AN EVENT (e.g. Ring Internal Buzzer)

FEATURE (SELECT)
Set Event Schedule
Assign the Event a Number (1-50)
Set the Event’s Duration
Set the Event’s Hour

DISPLAY

DEFAULT SETTING NO
OFF 12 HR: 12AM 24 HR: 00

OPTIONS (SCROLL pq) Scroll p(UP) or q(DOWN) to
schedule event SET EVENT (e.g.1, 2, 3 … 50)
OFF, .5 SEC, 1-15 SEC (determines length of time buzzer)
EVENT HOUR +/­ One Hour 12 HR: 12AM-11PM 24 HR: 00-23

Set the

00

Event’s Minute

Set the

ALL

Event’s Day

EVENT MINUTE +/­ One Minute (e.g. 00, 17, 59)
All week event, ALL: SUN-SAT
Monday thru Friday Event: M-F
One day event: SUN, MON, TUE, WED, THU, FRI, SAT

pyramidtimesystems.com

BUZZERS

8

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
PRINTING MODES
The 3500SS/3600SS/3700SS can be set to print semi-automatically or manually using the SET MODE feature. When set to AUTO the clock will print whenever the actuator is activated.
When set to MANUAL, the clock will only print when the “manual button” located in the left, top corner above the display screen is pressed.
Manual Button

ADJUSTING DOCUMENT EDGE
The actuator can be adjusted to accommodate different document widths. 1 Disconnect power plug before adjustment 2 Place clock on its side so the viewing window is facing towards you.
Actuator
3 Locate the “actuator adjustment knob” on the bottom of the clock. 4 Push “actuator adjustment knob” in while sliding the actuator back or forth to
adjust position.
DISCONNECT POWER PLUG BEFORE ADJUSTMENT

1

2

3

4

5

1

2

3

4

5

Model 360SS Time Record 120VAC 60 Hz 08 Amp

9 PRINTING MODES & ADJUSTING DOC EDGE

888.479.7264

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
USING TIME CLOCK
Align red LED SmartSiteTM alignment guide to location where time stamp is desired
1 To punch time card or stamp document, gently feed time card (35100-10 or 35100-10F) or document into slot at base of time clock, while aligning red LED SmartSiteTM alignment guide to location where time stamp is desired.
2 A – Continue to feed time card or document until the print actuator is activated. (Mode=Auto) B – Feed time card or document, and press Manual Button. (Mode=Manual)

pyramidtimesystems.com

USING TIME CLOCK 10

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
TIME CARDS

Time card #35100-10 or 35100-10F

TIME CARD PRINT FORMAT
The time card (#35100-10 or 35100-10F) is used for weekly pay periods. Printing will appear as follows:

PUNCH IN

JUL12 7:00AM Prints Month, Date & Punch Time

PUNCH OUT

JUL12 3:00PM Prints Month, Date & Punch Time

11 TIME CARD & PRINT FORMAT

888.479.7264

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS

PRINTING CUSTOM MESSAGES (3600SS)

Scenario: It is 7:46AM on 7/12/20. You have selected “DATE YR Time” from the Set Format Messages “(SET FMT MSGS)” menu. You have set Custom Message 1 “(CST MSG 1)” to PYRAMID TIME SYS. You have set Custom Message 2 to “”. The clock will print to your document as follows:

First print DATE

JUL12’20 7:46AM

Second print MESSAGE 1 PYRAMID time sys (print within 3 seconds after First print)

Third print MESSAGE 2 1

(print within 3 seconds after the Second print)

After clock prints date stamp (line 1) “JUL 12’20” you have three seconds to print custom message (line 2), “PYRAMID TIME SYS”. If you do not print first custom message (line 2, second print) within 3 seconds, the 3rd print (message 2) will not print and the
clock will revert to date stamp (line 1).

Example A First print DATE Second print

JUL 12’20 7:46AM JUL 12’20 7:46AM (if 3 seconds or more goes by, after the
1st print, message will not appear)

If longer then 3 seconds the message won’t appear, and clock defaults back to time. The counter will advance but will not print because we didn’t make 2nd print during the first 3
seconds.

After you print first custom message (line 2), “PYRAMID TIME SYS”, you have three seconds to print second custom message (line 3), “1”. Again, if you do not print second custom message (line 3) within 3 seconds, the clock will revert to date stamp (line 1).

Example B First print DATE Second print MESSAGE 1 Third print MESSAGE 2

JUL 12’20 7:46AM PYRAMID time sys JUL 12’20 7:46AM (if 3 seconds or more goes by, after the
2nd print, message will not appear)

After you print second custom message (line 3), “1”, the clock automatically will return to date stamp (line 1).

Example C First print DATE

JUL 12’20 7:46AM

NOTE: Each time date stamp prints(Examples A, B & C) the counter advances +1 (even though sequential numbers did not print).

pyramidtimesystems.com

PRINTING CUSTOM MESSAGES 12

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
REPLACING RIBBON CARTRIDGE
1 Unlock and remove cover. 2 Press p(UP) for 3 seconds to park ribbon carriage (Clock has to dispaly TIME). 3 Unplug power to time clock IMPORTANT. 4 Turn clock on its side so ribbon cartridge & holder are on top. 5 Slide actuator to far left and out of the way which is located underneath the
clock. (see diagram). 6 Remove old ribbon cartridge by holding tab and lifting up. 7 Snap in new ribbon cartridge between printer head and mylar. 8 Turn the knob, follow arrow to stretch the ribbon. It will turn easily. 9 Replace cover, lock unit & plug in. 10 Feed time card through unit to test print quality. 11 Readjust the actuator.
Knob
Ribbon tabs
Ribbon clips

Printer head Mylar

Slide actuator far right and out of the way (located underneath the unit)

If ribbon is not completely over print head the resulting print will show incomplete characters. If ribbon cartridge is not completely snapped in holder, the resulting print will be increasingly lighter.

13 REPLACING RIBBON CARTRIDGE

888.479.7264

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
MASTER RESET NOTE: This will delete all settings and reset to factory defaults
1 Unplug power to time clock. 2 Press & hold p(UP) button while plugging unit back in. 3 Release p(UP) button when “88:88, time not set” displays. 4 Re- program time clock.

FAQS

Q:

Do I have to use special cards?

A:

Pyramid 35100-10 or 35100-10F (French) cards are designed for use with

the 3500SS/3600SS/3700SS when it is used for payroll, but you can use it to

stamp other documents.

Q:

What does ATAAP mean?

A:

ATAAP is the acronym used by the U.S. government that describes how time

is accounted for using hundredths of hour (i.e. 1.25 hrs = 1hr 15min.)

ACCESSORIES

3500SS/3600SS/3700SS : ACCESSORIES

PART #

DESCRIPTION

5000R

Replacement Ink Ribbon Cartridge

35100-10

Time Cards (100pk)

35100-10M

Time Cards (1000pk)

35100-10F

Time Cards (100pk) English/French

35100-10FM

Time Cards (1000pk) English/French

400-10

10 Capacity Adjustable Time Card Rack

400-3

25 Capacity Adjustable Time Card Rack

400-X

25 Capacity Expanding Time Card Rack

41479K

Replacement Key

300-1

Heavy Duty Metal Time Card Rack, 25 Card Capacity

pyramidtimesystems.com

MASTER RESET 14

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS
LIMITED HARDWARE WARRANTY
Pyramid Time System warrants its equipment to original user against defective material or workmanship for a period of 1-year from date of purchase. Proof of purchase & purchase date are required for warranty service on this product.
Please remember to register your product at pyramidtechnologies.com/ProductRegistration
Pyramid Time Systems’ responsibility under this warranty is limited to replacement of defective part(s). Replacement is the sole discretion of Pyramid Time Systems.
For Return Shipments to Pyramid Time Systems, product must be shipped in its original carton or equivalent. The cost & method of return freight for warranteed product is the sole responsibility of the customer. Pyramid Time Systems will not assume any responsibility for loss or damage incurred in shipping.
Pyramid Time Systems reserves the right to determine whether parts failed because of defective material, workmanship or other causes.
Failure caused by accident, alteration, misuse or improper packaging of returned unit is not covered by this warranty.
Any repair done by the customer without the consent from Pyramid Time Systems will -ally void the warranty.
Users in countries other than Canada and USA should contact the Dealer from whom the unit was purchased.
The rights under this warranty are limited to the original user and may not be transferred to subsequent users.

CONTACT US: For more information, visit pyramidtimesystems.com or call our technical support team at 888.479.7264 during regular business hours: 8:30am- 5pm EST, M-F, or email customer_support@ptitime.com

15 WARRANTIES

888.479.7264

SMART SITETM TIME CLOCK & DOCUMENT STAMP Model 3500SS/3600SS/3700SS

SPECIFICATIONS

3500SS/3600SS/3700SS : SPECIFICATIONS

OPERATING CONDITIONS Temperature Humidity
POWER POWER FAILURE
Battery Back-Up Battery Life CALENDAR CLOCK ACCURACY WEIGHT DIMENSIONS 3500SS/3600SS 3700SS CERTIFICATIONS MOUNTING

0°C – 50°C, 32°F – 122°F 10-95% RH, non condensing 100-240VAC, 50/60 Hz
Hold time and date for life of battery 10 Years Automatic Leap Year & Daylight Savings Time, Year up to 2099 Less than 30 seconds/year 2.6lbs (1.17kg)
6.125inW x 5.75inH x 6.75inD (15.5cm x 14.6cm x 17.2cm) 8inW x 5.75inH x 6.75inD (20.3cm x 14.6cm x 17.2cm) UL and CUL (power supply) Desktop or Wall mountable

CONTACT US: For more information, visit pyramidtimesystems.com or call our technical support team at 888.479.7264 during regular business hours: 8:30am- 5pm EST, Monday-Friday.
Copyright © 2024 Pyramid Time Systems, LLC. All rights reserved.

pyramidtimesystems.com

SPECIFICATIONS 16

HMSMOoAdRRèeLTlOe3GS53IET050EPSTM0O3SIT/SN53/ITM063EE006U0SCSS0SLESO/SE3CTK6D0&A0TDESOUSCRUMDMOEEUNDOTNCSTUTIAMNMEGPNTTSEMMARPTLSAITTEETM 3500SS/3600SS PLANTILLA DE MONTAJE 3500SS/3600SS MODELE DE MONTAGE
SCREW GUIDE TEMPLATE BELOW IS ACTUAL SIZE LA PLANTILLA DE GUÍA DE TORNILLO A CONTINUACIÓN ES DE TAMAÑO REAL
LE MODE D’EMPLOI ET SCHÉMA DES VIS CI-DESSUS EST DE TAILLE RÉELLE
3″
UP/ ARRIBA / EN HAUT
LEVEL LINE MARKER/MARCADOR DE LÍNEA DE NIVEL/ REPÈRE DE LA LIGNE DE NIVEAU
17 MOUNTING TEMPLATE/PLANTILLA DE MONTAJE/MODEL DE MONTAGE 888.479.7264

18

3700SS MOUNTING TEMPLATE/PLANTILLA DE MONTAJE/MODELE DE MONTAGE
SCREW GUIDE TEMPLATE BELOW IS ACTUAL SIZE LA PLANTILLA DE GUÍA DE TORNILLO A CONTINUACIÓN ES DE TAMAÑO REAL
LE MODE D’EMPLOI ET SCHÉMA DES VIS CI-DESSUS EST DE TAILLE RÉELLE
5.5″
UP/ ARRIBA / EN HAUT
LEVEL LINE MARKER/MARCADOR DE LÍNEA DE NIVEL/ REPÈRE DE LA LIGNE DE NIVEAU

18

CONTACT US: For more information, visit pyramidtimesystems.com or call our technical support team at 888.479.7264 during regular business hours: 8:30am- 5pm EST, Monday-Friday.
Copyright Information © 2024 Pyramid Time Systems, LLC. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws. The information contained herein is subject to change without notice. The only warranties for Pyramid Time Systems products are set forth in the express warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. Pyramid Time Systems shall not be liable for technical or editorial errors or omissions contained herein.
I2279FS Rev O
888.479.7264

References

• Home - Pyramid Time Systems
• Home - Pyramid Time Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>