Siindoo JH-926C Headphone User Manual
- September 19, 2024
- Siindoo
Table of Contents
JH-926C Headphone
“`html
Product Information
Specifications:
- Model name: JH-926C
- Bluetooth version: V5.3
- Working distance: >10m
- Frequency response: 2402-2480MHz
- Input Voltage: DC 5V, 0.5A
- Charging time: About 2 hours
- Charging port: Type-C
- Speaker driver unit: 40mm, 32Ω
Product Usage Instructions:
1. Product Function Instructions:
– Call/EQ switch:
- + Button: Volume up/Next song
- – Button: Volume down/Previous song
- Power Button: Power on/off, Music play/pause, LED light
on/off
– Type-C charging port – Bluetooth indicator, charging indicator –
3.5mm jack – Microphone
2. Product Operation Instructions:
2.3 EQ Mode Switch:
There are 3 different EQ modes for option – Bass mode, Pop mode,
and vocal mode. Click the button to switch between these modes
while playing music.
FAQ:
FCC Statement: For FCC compliance information, refer to the user
manual or contact the manufacturer.
“`
Headphone User Manual
1.Product function instructions
Call/EQ switch “+”: Volume up/Next song
“-“: Volume down/Previous song
” “:Power on/off,Music play/pause,LED light on/off Type-C charging port
Bluetooth indicator,charging indicator 3.5mm jack Microphone
2.Product operation instructions
2.1 Power on/off Power on:Press and hold ” ” around 2 seconds until the blue
indicator will be on 3 seconds ,then the red and blue indicator blinks
alternately,it will be pairing status; Power off:Press and hold ” ” around 2
seconds ,the red indicator will be on around 1 seconds and goes off. 2.2
Pairing Turn on the Bluetooth switch of the mobile phone or other devices
(such as PC,Tablet etc), and enter into the Bluetooth list ,search for the
pairing name “JH-926C”; When seeing the pairing name “JH-926C” on the
list,click it to connect the headset with your device. Once paired
successfully, the blue indicator blinks every 6 seconds.
2.3 EQ mode switch There are 3 different EQ modes for option, they are :Bass
mode,Pop mode and vocal mode. When playing music,click the button to switch
different EQ mode.
2.4 Music playing Volume up: Click the button to increase volume Volume down:
Click the button to decrease volume Next song: Press and hold the button
around 2 seconds Previous song: Press and hold the button around 2 seconds
Music play/pause: Click the button
2.5 Calling (Mobile) Answer call:Click the button when call is coming
End call:Click the button when call is over
Cancel call:Click the button when calling
Reject call: Press and hold the button around 2 seconds when call is coming
Redial:Double click the button to redial last call number 2.6 Reset: Press and
hold the “+” and “-” button at the same time around 3 seconds until the red
and blue indicator blinks alternately.
2.7 Siri or google assistant: In standby mode or music mode, doube click the
button around 2 seconds Low battery alert:The red indicator will blinks slowly
with voice tone “didi”
3.LED light on/off
The LED light will be on once turn on the headphone; The LED light can be off by long press the button
4.Bluetooth indicator instruction
Connect successfully Pairing status Reset Listen to music Charge fully Power off Charging
The blue indicator blinks every 6 seconds The red and blue indicator blink alternately The red and blue indicator blink alternately The blue indicator blinks every 6 seconds The indicator will be solid blue The red indicator will be on around 1 second then goes off The indicator will be solid red
5.AUX mode
Connect one end of the 3.5mm audio cable into the audio jack of the headset
Connect the other end into your mobile or other devices,then can play music
PS: The headphone will be power off once plug the 3.5mm audio cable into audio
jack(When headphone is power on),the 3.5mm audio cable must be taken out from
the headphone if need to turn on the headphone
5.Charging instruction
Before using,please check and assure the battery is enough. While the headphone is in low battery, please use Type-C charging cable to charge and the charging indicator will be red when charging. Once it’s fully charged,the indicator will be solid blue.
6.Technical parameters
Model name Bluetooth version Working distance Frequency response Input Voltage Charging time Charging port Speaker driver unit
JH-926C V5.3 >10m 2402-2480MHz DC 5V,0.5A About 2H Type-C 40mm,32
7.FAQ
7.1 Headphone can’t be turned on Please ensure the battery is enough. 7.2
Pairing failure Please ensure the headphone is in power on and pairing status,
and the mobile or other device locates within 1 m range; And then redo again.
7.3 Connect automatically The headphone will automatically connect the mobile
or other devices which used last time 7.4 Sound cut off/stuck Check whether
the mobile or other devices locates valid range (10m) and whether there are
obstacles between the headphone and mobile . 7.5 Charging way Please ensure
the charging adaptor is DC 5V/1A,or Car charger or power bank to charge the
headphone.
FCC Statement
1.This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference. (2)This device must accept any interference received, including
interference that may cause undesired operation. 2. Changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. Note:This equipment has been tested
and found to comply with the limits for a class B digital device,pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures: ·
Reorient or relocate the receiving antenna. · Increase the separation between
the equipment and receiver. · Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. · Consult the
dealer or an experienced radio/TV technician for help. The device has been
evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.