Siindoo Acoustics Technology Co Ltd TAG A Locator User Manual
- June 1, 2024
- Siindoo Acoustics Technology Co Ltd
Table of Contents
Siindoo Acoustics Technology Co Ltd TAG A Locator User Manual
Getting Started
Power On/Off:
Press the Locator Function Button once to turn it on. It should beep once to
indicate that it is powered on
To power off, hold the same button for at least three seconds. You will hear
two beeps to indicate that your Locator is powered off.
Check For Updates:
To use the Apple Find My app to locate this item. the latest version of iOS,
iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires
the latest version of watchOS.
Add your Locator
Start The App
Open Find My app on your supported iPhone.
Connect Your Locator
Press the function button around 3 seconds to power on your Locator.
Tap+. then “Add Other Item”.
Once your Locator is located, tap “connect”
Enter a name and choose an emoji for your Locator and tap “Continue”.
Find My will ask for confirmation to add your Locator to your Apple ID Tap “Agree”
Tap “Finish” and your Locator will be set up and ready to be used.
Locate your Locator
Find Locator When It’s Nearby:
Open Find My app and select the “Items” tab or open the Find Items app on your
Apple Watch.
Tap on your Locator from the list. Tap “Play Sound” to make your Locator beep.
Tap “Stop Sound” to stop the beeps once you find.
Find Locator Location:
Open Find My app and select the “Items” tab or open the Find Items app on your
Apple Watch.
Tap on your Locator from the list. Your Locator location will appear on the
Map with a time stamp of when the iterm was located
To navigate to the Locator location, tap “Directions” to open Apple Maps
Notifications
Enabling “Notify When Left Behind”:
Open Find My app and select the “Items” tab or open the Find Items app on your
Apple Watch.
Tap on your Locator from the list.
Under “Notifications” enable the “Notify When Left Behind” toggle
You will receive a notification when you leave your Locator behind and it’s no longer in range of your device.
Enabling “Notify When Found”:
Under “Notifications”, enable the “Notify When Found” toggle.
When your Locator is seen by another Find My network device. you will receive a notification of its location.
Note: Notify When Found” can only be activated when your Locator is out of range.
When your Locator Is lost
Enabling “Lost Mode”:
Open Find My app and select the “Items” tab or open the Find Items app on your
Apple Watch
Tap on your Locator from the list. Under “Lost Mode” tap “Enable”
A screen detailing Lost Mode will pop up, tap “Continue”
Enter your phone number or email address and tap “Next”.
You may enter a message that will be shared with the person that finds your
item.
Tap “Activate” to enable “Lost Mode”
Note: When “Lost Mode” is enabled, “Notify When Found” is automatically enabled.
Note : When” Lost Mode” is enabled, your Locator is locked and cannot be paired to a new device.
Resetting Locator
Remove The Locator From Find My App:
Open Find My app and select the “Items” tab. Tap on your Locator from the
list. please ensure “Lost Mode” is disabled.
Scroll to the bottom of the screen and tap “Remove Item”.
A summary will open, tap “Remove” to confirm.
Factory Reset Your Locator:
After successfully removing the Locator from Find My app. press the Locator
function button four times rapidly and then hold it a fifth time until you
hear a ringing chime.
The Locator is now reset and ready to be paired to a new Apple ID.
Extras
Unwanted tracking:
If any Find My network accessory separated from its owner is seen moving with
you over time, you’ll be notified in one of two ways:
- If you have an iPhone, iPad, Find My will send a notification to your Apple device. This feature is available on iOS or iPadOS 14.5 or later.
- If you don’t have an ios device or a smartphone, a Find My network accessory that isn’t with its owner for a period of time will emit a sound when it’s moved.
These features were created specifically to discourage people from trying to track you without your knowledge.
FCC Statement
This device complies with Part 15 of the FCC Rules Operation is subject to the followingtwo conditions.
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that maycause undesired operation.
2. Changes or modifications not expressly approved by he party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a class B digital device.pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and if not installed and used in accordance with the instructions,may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation if this equipmemt does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
The Fine Print
is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna Increase the separation between the
equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receivers connected
About Apple Find My
The Apple Find My network provides an easy, secure way to locate compatible personal items on a map using the Find My app on your iPhone, iPad, or Mac. Simply pair your compatible product with the Apple Find My app to view it right alongside your Apple devices. If your item ever goes missing, you can put it in Lost Mode to display a message and contact information to anyone who might find it. The Find My network is encrypted and anonymous. so no one else, not even Apple or the maker of your personal item. can view its location.
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Watch, iPad, iPadOS, Mac, and macOS are the trademarks of Apple Inc., registered in the U.S. and other countries, IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.