CAMEC Weight Scale Ashmores Caravan Services and Accessories Instruction Manual
- September 19, 2024
- CAMEC
Table of Contents
CAMEC Weight Scale Ashmores Caravan Services and Accessories
Product Information
Specifications
- Product Name: CAMEC Weight Scale
- IP Rating: IP44
- Contact Information: 1300 422 632, email: camec@camec.com.au
- Website: www.caravansplus.com.au
Product Usage Instructions
Setting Up the Scale:
- Place the weight scale on a flat and stable surface. Ensure it is securely positioned to prevent accidents.
Powering On the Scale:
- Press the power button to turn on the scale. Wait for the display to show ‘0.0’ indicating it is ready for use.
Weighing Objects:
- Place the object you want to weigh on the scale gently. Wait forthe weight reading to stabilize before noting down the measurement.
Switching Off:
- After use, press the power button again to switch off the scale. This helps conserve battery life.
FAQ
Frequently Asked Questions
- Q: What is the maximum weight capacity of the CAMEC Weight Scale?
- A: The maximum weight capacity of the scale is 150kg.
- Q: Can the scale be used in wet conditions?
- A: The IP44 rating indicates that the scale is protected against splashing water, making it suitable for use in some wet conditions, but it is not waterproof.
- Q: How do I change the unit of measurement on the scale?
- A: Refer to the user manual for specific instructions on changing the unit of measurement as it may vary based on the model.
Please read the manual carefully before using this product
Overview
- Digital display
- On/off button
- Mode switch button
- SUM button
- The area for load-bearing
- Charging Indicator
- Reset switch
- TYPE-C charging port, Charging cable include
Power And Mode
Power ON/OFF
- Press to switch on and hold for 3 seconds to switch off.
Mode switch:
- Press on/off button to start
- Hold the SUM button, then press the Mode Switch button to switch modes
- There are three modes to choose from, illustrated below
Recommended Usage
- Position the product approximately 40-50cm away from the tires.
- Start the vehicle, release the brake completely, and avoid pressing the accelerator.
- Drive at a steady pace through the designated area.
- Reverse mode is recommended to use.
Reset switch
- When the display area of the product function fails or the power switch function fails, insert the reset-tool into the 07 holes, start the reset switch, the product will return to the initial ‘state’
Specifications
- Size: 360 x 72 x 47 mm
- Weight: 1,28 kg
- Battery Specification: 3,7 V, 600mAh Lithium polymer battery
- Input voltage/current: 5V / 0,6A
- Battery capacity: 15 hours (approximately 60 rounds of use)
- Waterproof grade: 1P44
Warning:
- Don’t measure the weight of product over 1500 KG.
- The control panel must not be compressed by heavy objects.
- The product should not be immersed in water or be used/stored for long periods of time in a humid environment.
- When measuring the weight of the object, the accuracy tolerance is 2.5%.
- Please make sure to use this product on a hard and even surface, and avoid slippery roads.
Definition of symbols
Contact
- For more information, contact Camec on 1300 422 632 or email: camec@camec.com.au
- More information https://www.caravansplus.com.au
- camec.com.au
References
- Caravan and RV Superstore | Caravan Supplies | Caravan Shop Online – Camec
- Caravan Accessories & RV Parts Australia - CaravansPlus
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>