LINDY 38174 V2 300m Fibre Optic HDMI 4K60 and IR Extender User Manual

LINDY 38174 V2 300m Fibre Optic HDMI 4K60 and IR Extender

Safety Instructions

! WARNING !
Please read the following safety information carefully and always keep this document with the product.
Failure to follow these precautions can result in serious injuries or death from electric shock, fire or damage to the product. Touching the internal components or a damaged cable may cause electric shock, which may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 – 240 VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and ensure it is firmly secured in place and does not detach by pulling before installing into a power socket. To reduce risk of fire, electric shocks or damage:

• Do not open the product nor its power supply. There are no user serviceable parts inside.
• Only qualified servicing personnel may carry out any repairs or maintenance.
• Never use damaged cables.
• Do not expose the product to water or places of moisture.
• Do not use this product outdoors it is intended for indoor use only.
• Do not place the product near direct heat sources.
• Always place it in a well-ventilated place.
• Do not place heavy items on the product or the cables.
• Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket

Instructions for Use of Power Supply

| Attach the required adapter
---|---
| Rotate clockwise to lock adapter into place
| Rotate anticlockwise to unlock adapter and remove

Introduction

Thank you for purchasing the 300m Fibre Optic HDMI 4K60 & IR Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.

The Lindy 300m Fibre Optic HDMI & IR Extender is a high-performance solution for extending 4K UHD 3840×2160@60Hz transmissions over incredible distances, which are not possible with traditional copperbased systems, using a single standard LC simplex multimode (50/125m) or single mode (9/125m) fibre optic cable.

Package Contents

• Fibre Optic HDMI Extender, Transmitter
• Fibre Optic HDMI Extender, Receiver
• Fibre Optic Transmitter SFP+ Module
• Fibre Optic Receiver SFP+ Module
• 2 x IR Emitter Cable, 1.5m
• 2 x IR Receiver Cable, 1.5m
• 2 x 5VDC 1A Multi-country Power Supply (UK, EU, US & AUS), Screw type barrel Size: 5.5/2.1mm
• 2 x Terminal Blocks
• Lindy Manual

Features

• Supports resolutions up to 3840×2160@60Hz 4:4:4 8bit, with additional support for HDR
• HDCP 2.2/1.4 Pass-through
• Supports up to 7.1CH audio pass-through, with 3.5mm audio embedding & extraction
• Bi-directional IR & RS-232 (Pass-through) control
• EDID Management
• Local HDMI Loop Out connection
• Screw Type DC Plug for a secure connection (5.5/2.1mm)

Specification

• Requires a single Simplex LC Single Mode (9/125µm) or Multimode (50/125µm) cable

• Extends 18G signals up to 300m (984.24ft) or 1000m (3280.8ft) with the included single mode SFP+ modules

• HDMI 2.0

• HDCP 2.2 & 1.4

• Maximum Bandwidth: 18Gbps

• Maximum Resolution: 3840×2160@60Hz 4:4:4 8bit

• Supported Audio Formats: LPCM 2 / 5.1 / 7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS-

• Maximum Distance:

  • 1000m (3280.8ft) over single-mode fibre optic cable
  • 300m (984.24ft) over multi-mode fibre optic cable

• Black, steel housing

• Transmitter Ports:
  Input: HDMI Type A (Female), 3.5mm Audio (Female), Output: Simplex LC, HDMI Type A (Female)

• Receiver Ports:
  Input: Simplex LC, Output: HDMI Type A (Female), 3.5mm Audio (Female)

• Bi-directional Control Ports:
  RS-232 (Terminal Blocks), 3.5mm IR (Female)

• IR Support: 20KHz – 60KHz

• RS-232 Baud Rate: 4800-115200bps

• Operating Temperature: 0°C – 40°C (32°F – 104°F)

• Storage Temperature: -20°C – 60°C (-4°F – 140°F)

• Humidity: 20 – 90% RH (non-condensing)

• ESD Protection: Human body model – ±8kV (air-gap discharge) & ±4kV (contact discharge)

• Power Consumption: 3W (Maximum)

Installation

Please follow the steps below for installation when using HDMI source devices, if you are using DVI equipment, please substitute the HDMI cables for DVI to HDMI cables where required.

1. Connect the HDMI source to the HDMI Transmitter Unit using a HDMI cable.
2. If required, connect a local HDMI display to the HDMI Out port of the transmitter unit.
3. Insert the supplied SFP+ modules into the Optical Out and Optical In ports, respectively. Connect one end of the Simplex LC MM Fibre Cable to the SFP+ module fixed into the Optical Out port of the transmitter unit, and the other end of the cable to the SFP+ module positioned in the Optical In port of the receiver. Please use the correct fibre optic cabling.
4. Connect the HDMI display device to the HDMI output port on the receiver unit using an HDMI cable. 5
5. To use the IR remote signal functionality, connect the included IR extension cables to the correct In and Out IR ports of the transmitter and receiver units. The IR emitter connects to the IR Out port, while the IR receiver connects to the IR In port.
6. Place the IR emitter eye of either unit in front of the IR port of the equipment required to control, ensuring the receiver eye is in a clear line of sight of the IR remote.
7. Power on both the HDMI source and display(s).
8. Plug the DC power supplies into the Transmitter and Receiver units, the Power LED will illuminate on both units.
9. Once a link between the transmitter and receiver has been established, the Optical Link LED will illuminate. If this LED is flashing or switched off, a link has not been established.
10. Once a link between the transmitter and source device is established, the HDMI (In) Link LED will illuminate. If a local HDMI display is connected and a link has been established, the HDMI (Loop) Link LED will illuminate.
11. Once a link between the receiver and display is established, the HDMI Link LED on the receiver will illuminate.

Product Layout

Transmitter

1. Power LED: Indicates power is provided to the transmitter unit.

2. Optical Link LED: Illuminates when a link has been made between the transmitter and receiver units.

3. HDMI Link LED (In): Illuminates when a link has been made between the transmitter and source device. HDMI Link LED (Loop): Illuminates when a link has been made between the transmitter and local HDMI display.

4. IR In: Connect the included IR receiver cable and ensure the IR eye is in a clear line of sight.

5. IR Out: Connect the included IR emitter cable and ensure the IR eye is in a clear line of sight.

6. Audio EDID Switch: Position the dipswitch to select the audio signal source. When no video signal is used as an input, audio signals can be transmitter separately.

7. EDID Switch: Position the dipswitch to select the desired EDID:
   11: Copy Rx HDMI Out
   10: Copy Tx HDMI Loop Out
   01: 4K60_2CH
   00: 1080P_2CH
   

8. Update: Reserved for future firmware updates.

9. 5V DC: Connect the included 5VDC 1A power supply.

10. Optical Out: Connect to the receiver unit using a single-mode or multi-mode fibre cable.

11. HDMI Out: Connect to a local HDMI display.

12. HDMI In: Connect to an HDMI source device.

13. 3.5mm Audio In: Connect to a 3.5mm audio source device.

14. RS-232: RS-232 commands can be passed through over the fibre connection.

Receiver

1. Power LED: Indicates power is provided to the receiver unit.

2. Optical Link LED: Illuminates when a link has been made between the transmitter and receiver units.

3. HDMI Link LED: Illuminates when a link has been made between the receiver and display device.

4. IR In: Connect the included IR receiver cable and ensure the IR eye is in a clear line of sight.

5. IR Out: Connect the included IR emitter cable and ensure the IR eye is in a clear line of sight.

6. Update: Reserved for future firmware updates.
   

7. 5V DC: Connect the included 5VDC 1A power supply.

8. Optical In: Connect to the transmitter unit using a single-mode or multi-mode fibre cable.

9. HDMI Out: Connect to an HDMI source device.

10. 3.5mm Audio Out: Connect to an external audio output.

11. RS-232: RS-232 commands can be passed through over the fibre connection.

Control Operation

Bi-directional IR Control

The IR control function allows you to control the source device from the display side of the installation. It also provides the ability to control the display from source side of the installation.

IR Pin assignment can be seen here:

Bi-directional RS-232 Control

The RS-232 control function allows you to control the installation using two separate RS-232 devices, such as a PC and a projector or digital signage from the transmitter to receiver, or control the source device from the receiver side of the installation from a wall mounted control panel. To use this function, ensure all RS-232 cables are correctly connected from the unit’s terminal blocks. Please note the pin out on the units.

RS-232 Baud Rate: 4800-115200bps

Please note all connected devices must support RS-232.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products

Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

CE/FCC Statement

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements

UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.

FCC Certification

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation

The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.

Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-On-Tees, TS17 9JY
Englandsales@lindy.co.uk, T: +44 (0)1642 754000

References

• Lindy Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>