SEALEY 502 Series Tools Plus Safety Helmet User Manual
- June 3, 2024
- SEALEY
Table of Contents
502 Series Tools Plus Safety Helmet
User Manual
Model No’s: 502R • 502W • 502Y
• 502O • 502B • 502G • 502BLK
SAFETY HELMET EN397:2012+A1:2012
USER INSTRUCTIONS
For adequate protection, this helmet must fit or be adjusted to the size of
the user’s head.
Adjust the helmet by means of the adjustment knob found at the rear of the
helmet.
The size range of the head circumference is 52–63cm.
STORAGE AND CARE OF THE HELMET
The date of manufacture is moulded into the peak of the helmet. The recommended shelf life is 5 years from this date, and the recommended maximum “in use” life of the helmet is 3 years. The helmet is made to absorb the energy of an impact by partial destruction or damage to the shell and/or harness, even though such damage may not be readily apparent. The helmet must be thoroughly examined before every use. If the helmet is subjected to any impact, or suspected impact, it should be thoroughly examined, and replaced if its integrity cannot be guaranteed. The helmet must not be modified in any way, as this will affect its ability to protect the wearer. Helmets must not be adapted to fit any attachments. Do not apply paint, solvents, adhesives or any labels. Store the helmet in a clean dry place, and clean the helmet regularly using warm soapy water only.
Sealey Group Bury St Edmunds, Suffolk
Tel: 01284 757500
Fax: 01284 703534
Email: [email protected]
Web: www.sealey.co.uk