X-S3000 Pro Fog Machine

Product Information

Technical Specifications

• Model: X-S3000

• Dimensions: 660 x 404 x 290mm

• Weight: 16.6kg

• Power: 3000W (220V), 2000W (110V)

• Heat-up time: 7min (220V Version), 12min (110V Version)

• MAX continuous output duration: 40s (Max output), continuously
  (Low output)

• Fog output: 40000cuft/min

• Tank capacity: 9L

• DMX channels: 1 channel

Product Overview

The X-S3000 Pro Fog Machine features a nozzle, hanger, fuel
tank, handle, safety loop, rotary output control button, LCD
screen, 5-pin DMX, 3-pin DMX, power socket, circuit breaker, and
power switch.

Manual Operation on Control Panel

To operate the machine manually on the control panel, disconnect
the DMX communication cable first. Use the buttons on the control
panel to navigate through the setup menu and adjust parameters. The
rotary output control button allows you to adjust the fog
output.

Setting Menu

The setting menu includes options to configure DMX address,
interval set, duration set, volume out, and wireless settings. You
can also switch the language.

DMX Control

The Pro Fog Machine X-S3000 uses a single channel for control.
Different DMX values correspond to fog output control levels.

Operation Panel

The machine supports wireless operation with a built-in
function. A remote control can be used within a 10m range when
certain conditions are met.

Maintenance

Regular maintenance is essential for optimal performance.
Cleaning the machine, running it periodically, and using distilled
water for the pipe system are recommended practices.

Product Usage Instructions

Safety Considerations

• X-S3000 can be used both indoors and outdoors but keep the
  machine clean and dry.

• Ensure the power supply matches the rated voltage before
  connecting the machine. Connect to a grounded circuit to avoid
  electric shock.

• Disconnect the machine from AC power when not in use.

• Avoid using the machine in wet conditions or with fog fluid
  leakage.

• No user-serviceable parts inside; do not attempt repairs.

Operation Instructions

1. To manually operate the machine, disconnect the DMX cable and
   use the control panel buttons to adjust settings.

2. Use the rotary output control button to increase or decrease
   fog output.

3. Refer to the setting menu for configuring DMX address,
   interval, duration, volume, and wireless settings.

4. Follow the DMX control guidelines for adjusting fog output
   levels.

5. For wireless operation, ensure the machine is at operating
   temperature and no DMX signal is present.

Maintenance Instructions

1. Clean the machine regularly to prevent dust and liquid
   buildup.

2. Operate the machine at least once a month.

3. When storing or not using the machine for an extended period,
   flush the pipe system with distilled water.

FAQ

Q: Can I use any type of fog fluid with the X-S3000 Pro Fog

Machine?

A: It is recommended to use only compatible fog fluids with the
machine to ensure proper functionality and longevity.

Q: How often should I clean the X-S3000 Pro Fog Machine?

A: Cleaning the machine regularly is important to maintain
optimal performance. It is recommended to clean it after every few
uses or whenever visible dirt or residue accumulates.

USER MANUAL X-S3000 PRO FOG MACHINE
V2.1 2024/06/25
SHOWVEN Technologies Co., Ltd.

Thanks for choosing SHOWVEN® X-S3000 PRO FOG MACHINE, we wish it will bring you lots of exciting moments. Please read the following manual carefully before operating this product.
SAFETY CONSIDERATIONS
X-S3000 can be used in both indoor and outdoor, but please keep the machine clean and dry.
Before connecting machine to power, make sure power supply in consistent with the rated voltage of the equipment. Always connect to a grounded circuit to avoid risk of electric shock.
Disconnect the machine from AC power when not in use. his product is not waterproof design, please keep it dry, please do not use it when
there are fog fluid leakage or wet from rain. No user serviceable and modifiable parts inside the machine, never try to repair or
modify this product, unauthorized technician may lead machine to damage even risk of cause fire. For adult use only, keep it out of reach of children, and away from fire, inflammable and explosive articles. nstalled in well ventilated area, ensure at least 50cm space around the machine, cover of the nozzle is forbidden. Never use the machine under high temperature. Never fill the fluid tank with flammable liquid such as grease, gas, perfume etc. If the machine fails to work, please stop operation and unplug the machine. Check fog fluid, fuse, power connection etc. carefully, if can’t solve the problem, please contact SHOWVEN® or your local SHOWVEN® partner for advises. Only use SHOWVEN® original FX-M/FX-BM medium fog fluid Fog fluid is not drinkable, if swallowed immediately look for medical advice. In case of eye contact of fog fluid, please wash it with clean water.
Description
X-S3000 PRO FOG MACHINE is a professional fog machine designed by SHOWVEN®, with optimized atomizer and high precision control circuit, as well as user friendly rotary output control button, ensure X-S3000 generate uniform smoke effect to be suitable for different scenarios.
Technical Specifications
Model: X-S3000 Dension: 660 404 290mm Weight: 16.6kg Power: 3000W (220V), 2000W (110V) Heat-up time: 7min (220V Version), 12min (110V Version)

MAX continuous output duration: 40s (Max output), continuously (Low output) Fog output: 40000cuft/min Tank capacity: 9L DMX channels: 1 channel
Product Overview

1
2 3 4 5

12 11 10 9 8
1. Nozzle 2. Hanger 3. Fuel Tank 4. Handle 5. Safety Loop 6. Rotary Output Control Button 7. LCD Screen 8. 5-pin DMX 9. 3-pin DMX 10. Power Socket 11. Circuit Breaker 12. Power Switch

76

Manual Operation on Control Panel
To operate the machine manually on control panel, please disconnect DMX communication cable first. 1. Buttons on Control panel

MENU: switch through setup menu UP: Parameters up; multiplex “TIMER” (fog output time) DOWN: Parameters down; multiplex “VOLUME” (fog output start) ENTER: confirm and save parameters, multiplex “STOP” Rotary output control button: spin clockwise increase output; spin anti-clockwise
decrease output; Press to activate/stop fog output

Setting Menu
1. Main Interface: i) DMX address ii) Machine heating core temperature iii) Error information

2. Error information: Error
E0 System IC E2 Temp. Sensor E5 K Temp. Over
E6 Heat Fail

3. Setting Menu: Press “MENU” to switch through setup menu

Items

Value

DMX Address

1~511

Interval Set

1~200s

Duration Set

1~200s

Volume Out

1%~100%

Wireless Set

ON/OFF

(Language)

/English

Explanation Circuit fault Temperature sensor fault Circuit fault Heating element damage or circuit fault
Explanation DMX address Interval time Fog output duration Fog output volume Wireless ON/OFF switch Language switch

DMX control
Pro fog machine X-S3000 occupies only a single channel: 0-5 fog OFF; 6-255 increase the output volume.
Operation Panel
1. Wireless Operation: X-S3000 with built-in wireless function, the effective distance in a open space is around 10m. Remote control works only when machine reached operating temperature, wireless function of machine is ON and no DMX in signal. There are four buttons on the remote control: A: Turn on the machine; B: turn off the machine; C&D is invalid.
1.1 Match X-S3000 with remote control Match when turn on the machine. When turn on the machine, “Wireless Setup” appears on the LCD screen, within 6s, you can match the remote with machine by press any key on remote for 1s. If the match was successful, the LCD screen will flash twice, and shows “match successful” on screen. Match when X-S3000 already turned on. Switch to “Wireless Set” interface, ensure the wireless function was ON. Press any key on remote for 1s. If the match was successful, the LCD screen will flash twice.
1.2 X-S3000 operation with remote control Press A, X-S3000 start to generate fog; Press B, it stops working. Under wireless control status, adjust fog amount through rotary output control button at the rear panel of machine, the volume amount shows on LCD screen “Volume Out”. 1% means minimum output. 100% means maximum output. NOTE: When match the remote control with machine, release the button only when LCD screen flashed twice. If set the wireless function of the machine OFF, when turn on the machine, it won’t shows “Wireless Setup” interface. If under DMX control status, the wireless function of machine will void.

Maintenance
1. Use SHOWVEN® original fog fluid FX-M or FX-BM. 2. Check the filter in fluid tank before each show, clean or replace it when it is
necessary. 3. Running the machine at least once per month. 4. Clean machine regularly avoid dust, liquid accumulate on the machine. 5. Whenever storage or not use the machine for a period of time, please use distilled
water to wash the pipe system by filling the fluid bottle with distilled water and firing the machine several minutes.
Warranty Instructions
Sincere thanks for your choosing our products, you will receive quality service from us The product warranty period is one year. If there are any quality problems within 7
days after shipping out from our factory, we can exchange a brand new same model machine for you We will offer free of charge maintenance service for machines which with hardware malfunction (except for the instrument damage caused by human factors) in warranty period. Please don’t repair machine without factory permission
Below situations NOT included in warranty service: Damage caused by use other type of fog fluid which is not SHOWVEN FX-M or FX-BM. Damage caused by improper transportation, usage, management, and maintenance,
or damage caused by human factors; Disassemble, modify or repair products without permission; Damage caused by external reasons (lightning strike, power supply etc.) Damage caused by improper installation or use;
For product damage not included in warranty range, we can provide paid service. Invoice is necessary when applying for maintenance service from SHOWVEN®.

Showven Technologies Co., Ltd.
Tel: +86-731-83833068 Web: www.showven.cn E-mail: info@showven.cn Add: No.1 Tengda Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan,
410300, P.R.China

References

• Founder of Sparkular, Sparkular Machine Maker | Showven

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>