SHOWVEN P-S1500 Pro Fog Machine User Manual

: September 17, 2024
: Showven

Table of Contents

SAFETY CONSIDERATIONS
Δ Description
Δ Technical Specifications
Δ Product Overview
Δ Manual Operation on Control Panel
Δ DMX control
Δ Operation
Δ Maintenance
Δ Warranty Instructions
Documents / Resources

USER MANUAL
P-S1500 PRO FOG MACHINE
V2.1 2024/06/25

SHOWVEN Technologies Co., Ltd.

Thanks for choosing SHOWVEN® P-S1500 pro fog machine. Please read the following manual carefully before operating this product.

SAFETY CONSIDERATIONS

P-S1500 can be used in both indoor and outdoor, but please keep the machine clean and dry.
Before connecting machine to power, make sure power supply in consistent with the rated voltage of the equipment. Always connect to a grounded circuit to avoid risk of electric shock.
Disconnect the machine from AC power when not in use.
This product is not waterproof design, please keep it dry, please do not use it when there are fog fluid leakage or wet from rain.
No user serviceable and modifiable parts inside the machine, never try to repair or modify this product, unauthorized technician may lead machine to damage even risk of cause fire.
For adult use only, keep it out of reach of children, and away from fire, inflammable and explosive articles.
Installed in well ventilated area, ensure at least 50cm space around the machine, cover of the nozzle is forbidden.
Never use the machine under high temperature.
Never fill the fluid tank with flammable liquid such as grease, gas, perfume etc.
If the machine fails to work, please stop operation and unplug the machine. Check fog fluid, fuse, power connection etc. carefully, if can’t solve the problem, please contactSHOWVEN® or your local SHOWVEN ®partner for advises.
Only use SHOWVEN® original FX-M medium fog fluid
Fog fluid is not drinkable, if swallowed immediately look for medical advice. In case of eye contact of fog fluid, please wash it with clean water.

Δ Description

P-S1500 is compact professional fog machine based on our high end fog machine X-S3000 platform. Equipped with high precise temperature control circuit, together with professional atomizer allows P-S1500 achieve 25000cuft/min uniform and odorless fog output.

Δ Technical Specifications

Model: P-S1500
Dimension: 500×315×260mm
Weight: 13kg
Power: 1500W
Heat-up time: 8min
MAX continuous output duration: 15s (Max output)
MAX output distance: 7m
Fog fluid consumption: 4min/L
Fog output: 30000cuft/min
Tank capacity: 3L
DMX channels: 1 channel
Consumable: FX-M

Δ Product Overview

1. Nozzle	2. Hanger	3. Safety Loop
4. Fuel Bottle	5. 3-pin DMX	6. LCD Screen
7. Power Switch	8. Circuit Breaker	9. Power IN

Δ Manual Operation on Control Panel

To operate the machine manually on control panel, please disconnect DMX communication cable first.

Buttons on Control panel MENU: switch through setup menu
UP: Parameters up; multiplex “TIMER” (fog output time)
DOWN: Parameters down; multiplex “VOLUME” (fog output start)
ENTER: confirm and save parameters, multiplex “STOP”
Rotary output control button: spin clockwise increase output; spin anti- clockwise decrease output; Press to activate/stop fog output.
Main Interface First line: Display DMX address is “1”
Second line: Display the heating block temperature and the status or error information;
Error information
Error| Explanation
---|---
E0 System IC| Circuit fault
E2 Temp. Sensor| Temperature sensor fault
E5 K Temp. Over| Circuit fault
E6 Heat Fail| Heating element damage or circuit fault
Setting Menu
Press “MENU” to switch through setup menu

Items	Value	Explanation
DMX Address	1~511	DMX address
Interval Set	1~200s	Interval time
Duration Set	1~200s	Fog output duration
Volume Out	1%~100%	Fog output volume
Wireless Set	ON/OFF	Wireless ON/OFF switch
Language	English	Language switch

Δ DMX control

P-S1500 occupies only a single channel:
0-5: fog OFF;
6-255: increase the output volume.

Δ Operation

Wireless Operation:
P-S1500 with built-in wireless function, the effective distance in a openspace is around 10m. Remote control works only when machine reachedoperating temperature, wireless function of machine is ON and no DMX
in signal. There are four buttons on the remote control:
A: Turn on the machine;
B: turn off the machine;
C&D is invalid.

1.1 Match P-S1500 with remote control
a) Match when turn on the machine. When turn on the machine, “Wireless Setup” appears on the LCD screen, within 6s, you can match the remote with machine by press any key on remote for 1s. If the match was successful, the LCD screen will flash twice, and shows “match successful” on screen.
b) Match when P-S1500 already turned on. Switch to Wireless Set interface, ensure the wireless function was ON. Press any key on remote for 1s. If the match was successful, the LCD screen will flash twice.
1.2 P-S1500 operation with remote control
Press A, P-S1500 start to generate fog; Press B, it stops working.
Under wireless control status, adjust fog amount through machine “Volume Out” in the menu.
1% means minimum output. 100% means maximum output.

NOTE:
a) When match the remote control with machine, release the button only when LCD screen flashed twice.
b) If set the wireless function of the machine OFF, when turn on the machine, it won t shows Wireless Setup interface.
c) If under DMX control status, the wireless function of machine will void.

Δ Maintenance

Use SHOWVEN® original fog fluid FX-M.
Check the filter in fluid tank before each show, clean or replace it when it is necessary.
Running the machine at least once per month.
Clean machine regularly avoid dust, liquid accumulate on the machine.
Whenever storage or not use the machine for a period of time, please use distilled water to wash the pipe system by filling the fluid bottle with distilled water and firing the machine several minutes.

Δ Warranty Instructions

Sincere thanks for your choosing our products, you will receive quality service from us
The product warranty period is one year. If there are any quality problems within 7 days after shipping out from our factory, we can exchange a brand new same model machine for you
We will offer free of charge maintenance service for machines which with hardware malfunction (except for the instrument damage caused by human factors) in warranty period. Please don’t repair machine without factory permission
Below situations NOT included in warranty service:
Damage caused by use other type of fog fluid which is not originally from SHOWVEN®;
Damage caused by improper transportation, usage, management, and maintenance, or damage caused by human factors;
Disassemble, modify or repair products without permission;
Damage caused by external reasons (lightning strike, power supply etc.)
Damage caused by improper installation or use;
For product damage not included in warranty range, we can provide paid service.
Invoice is necessary when applying for maintenance service from SHOWVEN®.

https://www.facebook.com/Showven-228026294663699/?modal=admin_todo_tour
Showven Technologies Co., Ltd.
Tel: +86-731-83833068
Web:www.showven.cn E-mail: info@showven.cn
Add: No.1 Tengda Road, Liuyang Economic & Technical
Development Zone, Changsha, Hunan,
410300, P.R.China